AS/NZS 1050.1:1996
Current
The latest, up-to-date edition.
Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-05-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Describes methods for sampling and sample preparation for the determination of the chemical composition of pig iron, cast iron and steel. Procedures are described for use with both liquid and solid metal.
| Committee |
CH/10
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0315 1
|
| Pages |
38
|
| ProductNote |
Reconfirmed 20/01/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard describes methods of sampling and sample preparation for determining the chemical composition of pig iron, cast iron and steel. Procedures are described for use with both liquid and solid metal.
Originated in Australia as AS K1.0-1961 (being BS 1837.1:1952 endorsed without Amendment).
Previous edition AS 1213-1982.
Jointly revised and redesignated AS/NZS 1050.1:1996.
| AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
| AS 2027-2002 | Wear-resistant white cast iron |
| AS 1085.10-2002 | Railway track material Rail anchors |
| AS 2556-2000 | Electric resistance welded steel air heater tubes |
| AS/NZS 1163:2016 | Cold-formed structural steel hollow sections |
| AS 3600-2001 | Concrete structures |
| AS/NZS 2717.1:1996 | Welding - Electrodes - Gas metal arc - Ferritic steel electrodes |
| AS 1447-2007 | Hot-rolled spring steels (Reconfirmed 2017) |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS/NZS 3678:2016 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1085.2-2002 | Railway track material Fishplates |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 3637.1-2005 | Underground mining - Winding suspension equipment General requirements (Reconfirmed 2017) |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS/NZS 3679.1:2016 | Structural steel Hot-rolled bars and sections |
| AS 2074-2003 | Cast steels |
| AS/NZS 1163:2009 | Cold-formed structural steel hollow sections |
| AS 2266-2002 | Carbon steel spring wire for bedding and seating |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS/NZS 1594:1997 | Hot-rolled steel flat products |
| AS 1450-2007 | Steel tubes for mechanical purposes (Reconfirmed 2017) |
| AS/NZS 1595:1998 | Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016) |
| AS/NZS 3679.1:2010 | Structural steel Hot-rolled bars and sections |
| AS 4738.1-2007 | Metal castings Ferrous sand moulded |
| AS 3597-2008 | Structural and pressure vessel steel - Quenched and tempered plate |
| AS 4738.1-2004 | Metal castings Ferrous sand moulded |
| AS/NZS 1553.2:1999 | Covered electrodes for welding - Low and intermediate alloy steel electrodes for manual metal-arc welding of carbon steels and low and intermediate alloy steels |
| AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
| AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
| AS/NZS 2576:2005 | Welding consumables for build-up and wear resistance |
| AS/NZS 4671:2019 | Steel for the reinforcement of concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.