Skip to content
Please enter a keyword to search
  • Preview

    AS/NZS 3679.1:2016

    Current The latest, up-to-date edition.

    Structural steel Hot-rolled bars and sections

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  05-04-2016

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies the requirements for the production and supply of hot-rolled structural steel bars and sections.

    Scope - (Show below) - (Hide below)

    This Standard specifies the requirements for the production and supply of hot-rolled structural steel bars and sections.This Standard is intended for general structural and engineering applications. All grades specified in this Standard are suitable for—(a) welding in accordance with AS/NZS 1554, Parts 1, 2, 5 and 7; and(b) fastening, as specified in AS 3990, AS 4100, AS/NZS 4600, AS 5100.6 and NZS 3404.This Standard does not cover the following:(i) Structural steel—welded I sections.(ii) Carbon steels and carbon-manganese steels—Hot-rolled bars and semi-finished products.(iii) Steel reinforcing bars for concrete.Requirements for product conformity to this Standard are given in Appendix B.NOTES: 1 Guidelines for purchasers on requirements that should be specified by the purchaser and those that should or may be agreed on at the time of enquiry and order are given in Appendix A.2 Guidelines on cold-bending of rounds, flats and squares during fabrication are given in Appendix C.

    General Product Information - (Show below) - (Hide below)

    Committee BD-023
    Document Type Standard
    Publisher Standards Australia
    Status Current
    Supersedes

    History - (Show below) - (Hide below)

    Originated in Australia as part of AS A1—1925.Originated in New Zealand as AS/NZS 3679.1:1996.Previous edition 2010.Fourth edition 2016. Originated in Australia as part of AS A1-1925. Originated in New Zealand as AS/NZS3679.1:1996. Previous edition 2010. Fourth edition 2016.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
    AS/NZS 1554.7:2014 Structural steel welding Welding of sheet steel structures
    AS 2062-1997 Non-destructive testing - Penetrant testing of products and components
    AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Hot dip galvanizing
    AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
    AS 1544.2-2003 Method for impact tests on metals Charpy V-notch (Reconfirmed 2017)
    AS/NZS ISO 9001:2016 Quality management systems - Requirements
    AS/NZS 1554.5:2014 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
    AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
    AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
    AS/NZS 4600:2005 Cold-formed steel structures
    AS 4100-1998 Steel structures (Reconfirmed 2016)
    AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
    AS 2490-1997 Sampling procedures and charts for inspection by variables for percent nonconforming
    AS 5100.6-2004 Bridge design - Steel and composite construction
    AS 1171-1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022)
    AS/NZS 1554.1:2014 Structural steel welding Welding of steel structures
    AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
    AS/NZS 1554.2:2003 Structural steel welding Stud welding (steel studs to steel)

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 2304:2019 Water storage tanks for fire protection systems
    AS/NZS 3845.2:2017 Road safety barrier systems and devices Road safety devices
    AS/NZS 2980:2018 Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand
    AS/NZS 1576.2:2016 Scaffolding Couplers and accessories
    AS 5100.9:2017 Bridge design Timber
    AS 1559:2018 Hot-dip galvanized steel bolts and associated nuts and washers for tower construction
    AS 2809.2:2020 Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
    AS 5100.8:2017 Bridge design Rehabilitation and strengthening of existing bridges
    AS/NZS 1577:2018 Scaffold decking components
    AS 1228:2016 Pressure equipment - Boilers
    AS 4425:2020 Above‑ground burial structures
    AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
    AS 2809.4:2017 Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
    AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
    AS/NZS 5100.6:2017 Bridge design Steel and composite construction
    AS/NZS 4671:2019 Steel for the reinforcement of concrete
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective