AS/NZS 1554.6:2012
Current
The latest, up-to-date edition.
Structural steel welding Welding stainless steels for structural purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
31-05-2012
The objective of this Standard is to provide rules for the welding of a wide range of stainless steel fabrications (other than pressure vessels and pressure piping), and it applies to statically and dynamically loaded welds.
Committee |
WD-003
|
DocumentType |
Standard
|
ISBN |
978 1 74342 116 1
|
Pages |
115
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for the welding of stainless steel structures made up of combinations of stainless steel plate, sheet, sections, including hollow sections and built up sections, or castings and forgings, by the following processes:(a) Manual metal arc welding (MMAW).(b) Submerged arc welding (SAW).(c) Gas metal arc welding (GMAW).(d) Gas tungsten arc welding (GTAW).(e) Flux cored arc welding (FCAW).(f) Plasma arc welding (PAW).The Standard applies to the welding of steelwork in structures complying with appropriate Standards. Where welded joints are governed by dynamic loading conditions, the Standard applies to those welded joints that comply with the fatigue provisions of the relevant application Standards.The Standard prescribes materials of construction, weld preparations and weld qualities, surface finish, qualification of welding procedures and welding personnel, and fabrication and inspection requirements for welds related to all stainless steel fabrication including aesthetic, hygienic or other non-structural applications.NOTE: GMAW includes waveform controlled welding such as "synergic", "programmable", and "microprocessor controlled" processes' e.g. pulsed spray transfer, controlled short circuit transfer.
Originated as AS/NZS 1554.6:1994.
Second edition 2012.
AS 2205.10.1-2003 | Methods for destructive testing of welds in metal Corrosion test for welded austenitic stainless steel |
AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
AS 2214-2004 | Certification of welding supervisors - Structural steel welding |
AS 2205.2.1-2003 | Methods for destructive testing of welds in metal Transverse butt tensile test |
AS/NZS ISO 3834.2:2008 | Quality requirements for fusion welding of metallic materials Comprehensive quality requirements (Reconfirmed 2018) |
AS/NZS ISO 3834.4:2008 | Quality requirements for fusion welding of metallic materials Elementary quality requirements (Reconfirmed 2018) |
AS 2062-1997 | Non-destructive testing - Penetrant testing of products and components |
AS/NZS 4034.2:2008 | Motor vehicles - Cargo barriers for occupant protection Partial cargo barriers |
AS 2205.3.3-2003 | Methods for destructive testing of welds in metal Longitudinal guided bend test |
AS/NZS 4034.1:2008 | Motor vehicles - Cargo barriers for occupant protection Cargo barriers |
AS 2382-1981 | Surface roughness comparison specimens |
AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
AS/NZS 4854:2006 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (Reconfirmed 2017) |
AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
AS/NZS 1338.3:1992 | Filters for eye protectors Filters for protection against infra-red radiation |
AS 1966.1-1985 | Electric arc welding power sources - Transformer type |
AS/NZS 4673:2001 | Cold-formed stainless steel structures |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS 4822-2008 | External field joint coatings for steel pipelines |
AS/NZS ISO 3834.3:2008 | Quality requirements for fusion welding of metallic materials Standard quality requirements (Reconfirmed 2018) |
AS/NZS ISO 14343:2006 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification (Reconfirmed 2017) |
AS 3998-2006 | Non-destructive testing - Qualification and certification of personnel |
AS/NZS 1338.2:1992 | Filters for eye protectors Filters for protection against ultraviolet radiation |
AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
AS 2865-2009 | Confined spaces |
AS 2177.1-1994 | Non-destructive testing - Radiography of welded butt joints in metal Methods of test |
AS/NZS ISO 3834.5:2008 | Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 |
AS/NZS 1338.1:1992 | Filters for eye protectors Filters for protection against radiation generated in welding and allied operations |
AS ISO 13916-2003 | Welding - Guide on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
AS 2205.5.1-2003 | Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination (Reconfirmed 2018) |
AS/NZS 2980:2007 | Qualification of welders for fusion welding of steels |
AS/NZS 1995:2003 | Welding cables (Reconfirmed 2017) |
AS 60974.1-2006 | Arc welding equipment Welding power sources (IEC 60974-1:2000, MOD) |
AS 1674.1-1997 | Safety in welding and allied processes Fire precautions (Reconfirmed 2016) |
AS 2177.1-1981 | Radiography of welded butt joints in metal Methods of test |
AS 1470-1986 | Health and safety at work - Principles and practices |
AS 4100 SUPP 1-1999 | Steel structures - Commentary (Supplement to AS 4100-1998) |
AS 1966.2-1985 | Electric arc welding power sources - Rotary type |
AS 2205.3.1-2003 | Methods for destructive testing of welds in metal Transverse guided bend test (Reconfirmed 2018) |
AS/NZS ISO 17633:2006 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004, MOD) (Reconfirmed 2017) |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 2812-2005 | Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018) |
AS 60974.11-2005 | Arc welding equipment - Electrode holders |
AS 2799-1992 | Resistance welding equipment - Single-phase a.c. transformer type |
AS 2038-1977 | Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion |
AS 1674.2-2007 | Safety in welding and allied processes Electrical (Reconfirmed 2018) |
AS 3978-2003 | Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022) |
AS/NZS ISO 3834.1:2008 | Quality requirements for fusion welding of metallic materials Criteria for the selection of the appropriate level of quality requirements (Reconfirmed 2018) |
AS/NZS 2980:2018 | Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand |
AS 1657-2013 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
AS 1528.4:2019 | Stainless steel tubes and tube fittings for food processing and hygienic applications Clamp tube fittings |
AS/NZS 4994.4:2018 | Temporary edge protection Perimeter Protection Screens |
AS 2809.2:2020 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
AS 1528.2:2019 | Stainless steel tubes and tube fittings for food processing and hygienic applications Screwed tube couplings |
AS 5100.5:2017 | Bridge design Concrete |
AS/NZS 1577:2018 | Scaffold decking components |
AS 3996:2019 | Access covers and grates |
AS 1657:2018 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 1528.3:2019 | Stainless steel tubes and tube fittings for food processing and hygienic applications Butt weld tube fittings |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.