AS/NZS 1568:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Copper and copper alloys - Forging stock and forgings
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
21-05-2023
English
05-10-1998
Specifies requirements for copper and copper alloy wrought or cast forging stock, and forgings for general engineering purposes. Chemical composition, mechanical properties and manufacturing tolerances are specified, and appendices give purchasing guidelines and information on related composition specifications.
Committee |
MT-002
|
DocumentType |
Standard
|
ISBN |
0 7337 2199 0
|
Pages |
9
|
ProductNote |
Withdrawn 11-09-2018.
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard specifies requirements for copper and copper alloy wrought or cast forging stock, and forgings produced from it by the hot-forging process, intended for engineering purposes.NOTE: Advice and recommendations on information to be supplied at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.
First published in Australia in part as part of AS H3-1940 (endorsement of BS 251-1940 without amendment).
AS H11 first published 1940 (endorsement of BS 218-1940 without amendment).
Second edition AS H3-1968 (endorsement of BS 251:1963 without amendment).
Second edition AS H11-1968 (endorsement of BS 218:1963 without amendment).
AS H67 first published 1968 (endorsement of BS 1001:1960 without amendment).
AS H78 first published 1968 (endorsement of BS 944-1941 without amendment).
AS H84 first published 1968 (endorsement of BS 1948:1963 without amendment).
AS H85 first published 1968 (endorsement of BS 1949:1963 without amendment).
AS H86 first published 1968 (endorsement of BS 2032:1963 without amendment).
AS H87 first published 1968 (endorsement of BS 2033:1963 without amendment).
AS H90 first published 1968 (endorsement of BS 2872:1962 without amendment).
AS H11-1968, AS H67-1968, AS H78-1968, AS H90-1968, and parts of AS H3-1968, AS H84-1968, AS H85-1968, AS H86-1968 and AS H87-1968 revised, amalgamated and redesignated AS 1568-1974.
Second edition 1985.
Jointly revised and designated AS/NZS 1568:1998.
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 2614-1998 | Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing (Reconfirmed 2016) |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS 2345-2006 | Dezincification resistance of copper alloys |
AS 1391-1991 | Methods for tensile testing of metals |
AS 2345-1992 | Dezincification resistance of copper alloys |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 1515.1-1994 | Copper alloys Determination of lead in copper alloys (flame atomic absorption spectrometric method) (Reconfirmed 2016) |
AS 2419.3-2012 | Fire hydrant installations Fire brigade booster connections |
ATS 5200.016-2010 | Technical Specification for plumbing and drainage products Cistern inlet valves |
AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
ATS 5200.490-2007 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018) |
AS/NZS 3499:2006 | Water supply - Flexible hose assemblies (Reconfirmed 2016) |
AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
AS/NZS 4020:1999 | Products for use in contact with drinking water |
ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
AS/NZS 2638.2:2011 | Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022) |
ATS 5200.017-2005 | Technical Specification for plumbing and drainage products Cistern outlet valves |
ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
AS 4032.2-2005 | Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
AS 2419.2-1994 | Fire hydrant installations Fire hydrant valves |
AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
ATS 5200.425-2009 | Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system |
ATS 5200.476-2006 | Technical Specification for plumbing and drainage products Heated water systems - Leak protection device |
AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
AS 1628-1999 | Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015) |
ATS 5200.478-2006 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications |
AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
ATS 5200.477-2006 | Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices |
ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
ATS 5200.489-2009 | Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications |
AS 4956-2008 | Air valves for water supply |
ATS 5200.037.1-2006 | |
AS 2419.2-2009 | Fire hydrant installations Fire hydrant valves |
AS 4795-2002 | Double-flanged butterfly valves for waterworks purposes |
AS 4883:2017 | Air valves for sewerage |
ATS 5200.030-2012 | Technical Specification for plumbing and drainage products Solenoid valves |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
ATS 5200.482-2006 | Technical Specification for plumbing and drainage products Soil waste dump fitting |
ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
ATS 5200.472-2006 | Technical Specification for plumbing and drainage products Heated water system recirculation device |
AS 6401-2003 | Knife-gate valves for waterworks purposes (Reconfirmed 2015) |
AS 4775-2007 | Emergency eyewash and shower equipment |
AS 4795-2006 | Butterfly valves for waterworks purposes |
AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
ATS 5200.046-2005 | Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush |
ATS 5200.016-2005 | Technical Specification for plumbing and drainage products - Cistern inlet valves |
AS 5612-2013 | Butterfly valves for general purposes |
ATS 5200.475-2006 | Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device |
AS 4956:2017 | Air valves for water supply |
AS 1357.1-2009 | Valves primarily for use in heated water systems Protection valves |
ATS 5200.481-2006 | Technical Specification for plumbing and drainage products Thermal switching valves |
AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
AS 5200.007-2008 | Plumbing and drainage products Metal-bodied water hammer arresters |
AS 2638.1-1999 | Sluice valves for waterworks purposes Metal seated |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
ATS 5200.479-2006 | Flood stop safety valve |
ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
AS 3688-2005 | Water supply - Metallic fittings and end connectors |
AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
AS 2419.3-1996 | Fire hydrant installations - Fire brigade booster connections |
ATS 5200.485-2006 | Pressure compensating tank |
ATS 5200.486-2008 | Technical Specification for plumbing and drainage products Sprinklers for home applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.