AS/NZS 2712:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Solar and heat pump water heaters - Design and construction
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
27-08-2002
Specifies requirements for the design and construction of solar and heat pump hot water supply systems for household premises and for commercial and industrial installations comparable with household installations, intended to deliver potable water of acceptable quality.
Committee |
CS-028
|
DocumentType |
Standard
|
ISBN |
0 7337 4699 3
|
Pages |
44
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for the design and construction of solar and heat pump hot water supply systems and/or components for household premises and for commercial and industrial installations comparable with household installations, intended to deliver potable water of acceptable quality. It covers systems with a volumetric storage capacity up to and including 700 L, including solar water heaters that primarily use metallic absorber plates in the collector(s).NOTES: 1 This Standard may be used for a range of solar water heaters that utilize primarily plastics in the construction of the absorber plate.2 It is intended that these products be covered by this Standard or alternatively the next revision of this Standard, which will include more specific test requirements for the evaluation of the construction of such appliances.The Standard does not apply to solar hot water supply systems for space heating, swimming pool heating or for large buildings such as multiple dwelling buildings.NOTES: 1 The requirements of this Standard are based on systems with fixed solar orientation and inclination, but they may be applied to tracking systems.2 Rules for the installation of household solar hot water supply systems are given in AS/NZS 3500.4.2.
First published as AS 2712-1984.
Second edition 1993.
Jointly revised and designated as AS/NZS 2712:2002.
AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
AS/NZS 3350.1:2002 | Safety of household and similar electrical appliances General requirements (IEC 60335-1:1991, MOD) |
AS 1288-1994 | Glass in buildings - Selection and installation |
AS 1580.408.4-1993 | Paints and related materials - Methods of test Adhesion (cross-cut) |
AS 1145.3-2001 | Determination of tensile properties of plastics materials - Test conditions for films and sheets |
AS 1056.1-1991 | Storage water heaters General requirements |
AS 4234-1994 | Solar water heaters - Domestic and heat pump - Calculation of energy consumption |
AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
AS/NZS 1677.1:1998 | Refrigerating systems Refrigerant classification |
AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
AS 2078-1977 | Domestic oil-fired appliances (quality and performance) |
AS 3498-1995 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
AS/NZS 1044:1995 | Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and similar electric apparatus |
AS 3142-1994 | Approval and test specification - Electric water heaters |
AS 1056.2-1985 | Storage water heaters - Specific requirements for water heaters with single shells |
AS 1690-1975 | Rules for the safe design, construction and performance of domestic oil-fired appliances (known as the SAA Domestic Oil-fired Appliances Safe Design Code) |
AS 1145.4-2001 | Determination of tensile properties of plastics materials Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
AS 1145.5-2001 | Determination of tensile properties of plastics materials Test conditions for fibre-reinforced plastic composites |
AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 1056.3-1991 | Storage water heaters - Specific requirements for water heaters with composite shells |
AS 1145.2-2001 | Determination of tensile properties of plastics materials Test conditions for moulding and extrusion plastics |
AS 2813-1985 | Solar water heaters - Method of test for thermal performance - Simulator method |
AS/NZS 3350.2.40:2001 | Safety of household and similar electrical appliances Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:1995, MOD) |
AS/NZS 1677.2:1998 | Refrigerating systems Safety requirements for fixed applications |
AS 2984-1987 | Solar water heaters - Test for thermal performance - Outdoor test |
AS 1308-1987 | Electric water heaters - Thermostats and thermal cutouts (Reconfirmed 2016) |
AS 1145.1-2001 | Determination of tensile properties of plastics materials General principles |
AS/NZS 3350.2.21:1999 | Safety of household and similar electrical appliances Particular requirements - Storage water heaters |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.