AS/NZS 3500.2:2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plumbing and drainage Sanitary plumbing and drainage
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-06-2024
English
29-06-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.AS NZS 3500.2 2018 specifies requirements for the design and installation of sanitary plumbing and drainage from fixtures to a sewer, common effluent system or an on-site wastewater management system. Applies to new installations, additions or repairs to existing installations.
| Committee |
WS-014
|
| DevelopmentNote |
Under Revision by DR AS/NZS 3500.2:2021.
|
| DocumentType |
Standard
|
| ISBN |
978-1-76072-118-3
|
| Pages |
210
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for the design and installation of sanitary plumbing and drainage from fixtures to a sewer, common effluent system or an on-site wastewater management system, as appropriate. It applies to new installations as well as alterations, additions or repairs to existing installations.Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.NOTES: 1 The pre-treatment of trade wastes is not specified in this Standard.2 All sanitary plumbing and sanitary drainage installations for relocatable dwellings on long-term sites should conform with this Standard.
First published as AS 3500.2-1990.
Jointly revised and redesignated AS/NZS 3500.2.2:1996.
Jointly revised and redesignated AS/NZS 3500.2:2003.
Third edition 2018.
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| AS/NZS 7671:2010 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) (ISO 7671:2003, MOD) (Reconfirmed 2022) |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
| AS/NZS 4999:2006 | PVC-U maintenance shafts |
| AS 3501-1987 | Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017) |
| AS/NZS 4936:2002 | Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems (Reconfirmed 2020) |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
| AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 2544:1995 | Grey iron pressure fittings |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS 1428.5-2010 | Design for access and mobility Communication for people who are deaf or hearing impaired (Reconfirmed 2016) |
| AS/NZS 4327:1995 | Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020) |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| AS/NZS 1546.2:2008 | On-site domestic wastewater treatment units Waterless composting toilets |
| AS 1428.1-2009 | Design for access and mobility General requirements for access - New building work |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 4087:2011 | Metallic flanges for waterworks purposes |
| AS 3600-2009 | Concrete structures |
| AS/NZS 4401:2006 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) (Reconfirmed 2017) |
| AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
| AS/NZS 3500.1:2015 | Plumbing and drainage Water services |
| AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
| AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
| AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
| AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
| AS/NZS 1546.1:2008 | On-site domestic wastewater treatment units Septic tanks |
| AS/NZS 2032:2006 | Installation of PVC pipe systems (Reconfirmed 2024) |
| AS 1604.1-2012 | Specification for preservative treatment Sawn and round timber |
| AS 3495-1997 | Stainless steel non-pressure pipes and fittings (Reconfirmed 2018) |
| AS 2870-2011 | Residential slabs and footings |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 3571.1-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) |
| AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
| AS 1428.2-1992 | Design for access and mobility Enhanced and additional requirements - Buildings and facilities (Reconfirmed 2015) |
| AS/NZS 4130:2009 | Polyethylene (PE) pipes for pressure applications |
| AS 1428.4-1992 | Design for access and mobility Tactile ground surface indicators for the orientation of people with vision impairment |
| AS 1428.3-1992 | Design for access and mobility Requirements for children and adolescents with physical disabilities |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
| AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 1657-2013 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| AS/NZS 2878:2000 | Timber - Classification into strength groups |
| AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
| AS/NZS 1546.3:2008 | On-site domestic wastewater treatment units Aerated wastewater treatment systems |
| AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
| AS 1741-1991 | Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
| AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
| AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
| AS 1172.4:2019 | Sanitary plumbing products Washbasins |
| AS 1172.3:2019 | Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.