AS/NZS 3750.16:1998
Current
The latest, up-to-date edition.
Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-10-1998
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies requirements for waterborne primers and paints intended to be used on primed or unprimed galvanized steel, zinc/aluminium alloy-coated steel and on zinc-primed steel in exterior industrial or marine applications when applied by brush, roller or spraying.
| Committee |
CH/3
|
| DocumentType |
Standard
|
| ISBN |
0 7337 2167 2
|
| Pages |
17
|
| ProductNote | |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for waterborne primers and paints, intended to be used on primed or unprimed galvanized steel, on zinc/aluminium alloy-coated steel and on zinc-primed steel in exterior, industrial or marine applications when applied by brush, roller or spraying.Type 11 and Type 21 paints, as described in AS/NZS 2312, comply with the requirements of this Standard. Type 21 paint may be produced in a range of colours and may be pigmented with micaceous iron oxide (MIO).NOTES:1 When used with the appropriate primer, paint classed as Type 21 will comply with the requirements for paint systems LP4 - A, MP2 - A, MP2 - B, MP2 - C, MP2 - D, MSALP - B, MSZLP - B, GZLP - A and GZLP - B described in AS/NZS 2312.2 Some Type 21 paints may also be used as a primer for system GZLP - A while Type 11 paint may be used as a primer for system GZLP - B of AS/NZS 2312.3 Type 21 paint may be supplied in any of the following gloss levels as defined in AS/NZS 2310 - gloss, semi-gloss, low gloss or flat.4 Appendix A provides recommendations on information which should be provided by the purchaser at the time of enquiry or order.5 Additional information on the use and application of waterborne paints is contained in Appendix B.6 Alternative means for demonstrating of compliance with this Standard are given in Appendix C.
Originated in Australia as AS 3885-1991.
Jointly revised and redesignated AS/NZS 3750.16:1998.
| AS/NZS 1580.214.1:1997 | Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013) |
| AS/NZS ISO 9004.1:1994 | Quality management and quality system elements Guidelines |
| AS/NZS 2310:1995 | Glossary of paint and painting terms |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
| AS/NZS ISO 9000.1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
| AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS 3730.15-1991 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
| AS 1580.409.1-1992 | Paints and related materials - Methods of test Resistance to mudcracking |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS 1580.408.4-1993 | Paints and related materials - Methods of test Adhesion (cross-cut) |
| AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
| AS 1580.203.1-1993 | Paints and related materials - Methods of test Skin formation |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS 2905-1986 | Steel drums |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS 1580.105.2-1993 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS/NZS 1580.214.5:1997 | Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013) |
| AS 2855-1986 | Paints and related materials - Micaceous iron oxide pigment |
| AS/NZS 1580.481.1.11:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of chalking (Reconfirmed 2013) |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS 1580.401.6-1992 | Paints and related materials - Methods of test Hard dry condition (mechanical thumb test) |
| AS/NZS 1580.481.1.5:1999 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Change in gloss (Reconfirmed 2013) |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 1580.481.1.12:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change (Reconfirmed 2013) |
| AS 2854-1986 | Tinplate cans for general use |
| AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.409.2-1992 | Paints and related materials - Methods of test Low temperature coalescence |
| AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
| AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
| AS/NZS 1580.213.1:1997 | Paints and related materials - Methods of test Relative dry hiding power (Reconfirmed 2013) |
| AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS 3730.16-1991 | Guide to the properties of paints for buildings Latex - Timber finish - Exterior |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS/NZS 1580.481.1.2:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Discolouration (including bronzing) (Reconfirmed 2013) |
| AS/NZS 3750.15:1998 | Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013) |
| AS 2700-1996 | Colour Standards for general purposes - Swatches |
| AS/NZS 2633:1996 | Guide to the specification of colours (Reconfirmed 2013) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.