AS/NZS 4129:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fittings for polyethylene (PE) pipes for pressure applications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2008
29-05-2024
Specifies requirements for fittings to be used with polyethylene pipe manufactured in accordance with AS/NZS 4130 or AS 2698.2 or POP-009. This Standard is applicable to fittings manufactured for the conveyance of water, fuel gas, and other fluids including compressed air.
| Committee |
PL-006
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8791 6
|
| Pages |
52
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard specifies requirements for fittings to be used with polyethylene pipe manufactured in accordance with AS/NZS 4130 or AS 2698.2 or POP-009. This Standard is applicable to fittings manufactured for the conveyance of water, fuel gas, and other fluids including compressed air. NOTE: For continuous use at temperatures above 20°C refer to the manufacturer.The requirements of Section 1 apply to fittings manufactured to comply with all Sections of the Standard except where subsequent sections detail or exempt specific requirements.
Originated as AS 1460-1973.
AS 1460-1973 revised and redesignated as AS/NZS 4129:2000.
Second edition 2008.
| AS ISO 9624-2008 | Polyethylene (PE) pipes for fluids under pressure -Mating dimensions of flange adapters and loose backing flanges (ISO 9624:1997, MOD) |
| AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| AS 2345-2006 | Dezincification resistance of copper alloys (Reconfirmed 2016) |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS/NZS 4131:2003 | Polyethylene (PE) compounds for pressure pipes and fittings |
| AS 2698.2-2000 | Plastics pipes and fittings for irrigation and rural applications Polyethylene rural pipe (Reconfirmed 2017) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 1049-2003 | Telecommunication cables - Insulation, sheath and jacket |
| AS 2129-2000 | Flanges for pipes, valves and fittings |
| AS/NZS 4130:2003 | Polyethylene (PE) pipes for pressure applications |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2193-2005 | Calibration and classification of force-measuring systems (Reconfirmed 2017) |
| AS 1145.2-2001 | Determination of tensile properties of plastics materials Test conditions for moulding and extrusion plastics |
| AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS 2118.1:2017 | Automatic fire sprinkler systems General systems |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS 4796:2016 | Water supply - Metal-bodied and plastic-bodied ball valves for property service connection |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS/NZS 4645.1:2018 | Gas distribution networks Network management |
| AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
| AS/NZS 4998:2009 | Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022) |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
| AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
| AS/NZS 4645.3:2018 | Gas distribution networks Plastics pipe systems |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 5601.1:2013 | Gas installations General installations |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| AS/NZS 5601.1:2010 | Gas installations General installations |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.