AS/NZS 4765:2017
Current
The latest, up-to-date edition.
Modified PVC (PVC-M) pipes for pressure applications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
09-05-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.This Standard specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure. The pipes are intended for installation below ground, and above ground where they are not exposed to direct sunlight.
| Committee |
PL-021
|
| DocumentType |
Standard
|
| ISBN |
978 1 76035 757 3
|
| Pages |
39
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure. The pipes are intended for installation below ground, and above ground where they are not exposed to direct sunlight.Appendix G sets out additional requirements for pipes classed as best environmental practice PVC pressure pipe.NOTES: 1 Relevant installation requirements for pipe systems, including PVC-M pressure pipes manufactured to this Standard and the associated fittings are covered by AS/NZS 2032, AS/NZS 2566.2 and the AS/NZS 3500 series, as applicable.2 If the intention is to use pipes complying with this Standard for the conveyance of fluids other than water, the manufacturer should be consulted.3 Two series of pipes are specified (see the Foreword in this Standard).
Originated as AS/NZS4765(Int):2000.
Second edition 2007.
Third edition 2017.
Reissued incorporating Amendment No 1 (June 2024).
| AS/NZS 1462.16:2006 | Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017) |
| AS/NZS 2032:2006 | Installation of PVC pipe systems (Reconfirmed 2024) |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS 681.1-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS/NZS 1462.29:2006 | Methods of test for plastics pipes and fittings Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD) |
| AS/NZS 3500.2:2015 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 1462.1:2006 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings (Reconfirmed 2024) |
| AS/NZS 1462.15:1996 | Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017) |
| AS/NZS 1462.6:2008 | Methods of test for plastics pipes and fittings Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure (Reconfirmed 2017) |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS/NZS 1462.4:2002 | Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 3500.1:2015 | Plumbing and drainage Water services |
| AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS 2118.1:2017 | Automatic fire sprinkler systems General systems |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.