AS/NZS 4836:2011
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Safe working on or near low-voltage electrical installations and equipment
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
04-05-2011
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Provides workers on low-voltage electrical installations with: (a) the principles of safe working practices; and (b) recommended procedures for safe working practices.
| Committee |
EL-044
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9832 0
|
| Pages |
48
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes |
This Standard outlines principles and procedures of safe work, organization and performance on or near low-voltage electrical installations and equipment. It provides a minimum set of procedures, safety requirements and recommendations to manage the hazards associated with electricity, specifically arc blast, arc flash, electric shock and electrocution. Adopting these will provide a safe working environment for work on or near low-voltage electrical installations (see Clause 1.6.9) and equipment (see Clause 1.6.8).
First published as AS/NZS 4836:2001.
Second edition 2011.
Reissued incorporating Amendment No. 1 (May 2017).
| AS/NZS 2978:1995 | Insulating mats for electrical purposes |
| AS 4024.1101-2006 | Safety of machinery Terminology - Terms and definitions |
| AS/NZS 1337.5:2004 | Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
| AS/NZS 1892.5:2000 | Portable ladders - Selection, safe use and care |
| AS 4024.1801-2006 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| AS 2225-1994 | Insulating gloves for electrical purposes |
| AS 4024.1901-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators |
| AS 1892.2-1992 | Portable ladders Timber (Reconfirmed 2022) |
| AS 2865-2009 | Confined spaces |
| AS/NZS 1891.1:2007 | Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
| AS/NZS 1715:2009 | Selection, use and maintenance of respiratory protective equipment (Reconfirmed 2024) |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 4024.1401-2006 | Safety of machinery Ergonomic principles - Design principles - Terminology and general principles |
| AS 2550.10-2006 | Cranes, hoists and winches - Safe use Mobile elevating work platforms |
| AS 4024.1803-2006 | Safety of machinery Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body |
| AS 4024.1604-2006 | Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design |
| AS/NZS 1337.0(Int):2010 | Personal eye protection - Eye and face protectors - Vocabulary |
| AS/NZS 1716:2003 | Respiratory protective devices |
| AS/NZS 61008.1:2004 | Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 2.1 (2002) MOD) |
| AS/NZS 2210.1:2010 | Safety, protective and occupational footwear Guide to selection, care and use |
| AS 4024.1201-2006 | Safety of machinery - General principles - Basic terminology and methodology |
| AS/NZS 1892.1:1996 | Portable ladders Metal |
| AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 61558.2.3:2001 | Safety of power transformers, power supply units and similar devices Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT) |
| AS/NZS 1337.6:2007 | Personal eye protection Prescription eye protectors against low and medium impact |
| AS 4024.1902-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays |
| AS 4024.1301-2006 | Safety of machinery Risk assessment - Principles of risk assessment |
| AS/NZS 61558.2.15:2001 | Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD) |
| AS 4024.1501-2006 | Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
| AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
| AS 4024.1907-2006 | Safety of machinery Displays, controls, actuators and signals - System of auditory and visual danger and information signals |
| AS 4024.1302-2006 | Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers |
| AS 4024.1202-2006 | Safety of machinery General principles - Technical principles |
| AS/NZS 1891.4:2009 | Industrial fall-arrest systems and devices Selection, use and maintenance |
| AS 4024.1704-2006 | Safety of machinery Human body measurements - Anthropometric data |
| AS/NZS 61558.2.8:2001 | Safety of power transformers, power supply units and similar Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT) |
| AS 4024.1603-2006 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014) |
| AS/NZS 61558.2.17:2001 | Safety of power transformers, power supply units and similar Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD) |
| AS 3527.2-1990 | Hand-operated screwdrivers and screwdriver bits - Insulated screwdrivers |
| AS/NZS 2210.2:2009 | Occupational protective footwear Test methods (ISO 20344:2004, MOD) |
| AS/NZS 61558.1:2008 | Safety of Power Transformers, Power Supplies, Reactors and Similar Products General requirements and tests (IEC 61558-1 Ed 2, MOD) |
| AS/NZS 1337.4:2004 | Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors) |
| AS/NZS 3190:2009 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
| AS 4024.1502-2006 | Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014) |
| AS/NZS 61241.14:2005 | Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD) |
| AS 4024.1701-2006 | Safety of machinery Human body measurements - Basic human body measurements for technological design |
| AS 4741-2010 | Testing of connections to low voltage electricity networks (Reconfirmed 2021) |
| AS/NZS 3017:2007 | Electrical installations - Verification guidelines |
| AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
| AS/NZS 3832:1998 | Electrical installations - Cold-cathode illumination systems |
| AS 4024.1905-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking |
| AS/NZS 61558.2.5:2003 | Safety of power transformers, power supply units and similar Particular requirements for shaver transformers (IEC 61558-2-5:1997, MOD) |
| AS/NZS 61009.1:2004 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 2.1 (2003) MOD) |
| AS/NZS 1270:2002 | Acoustics - Hearing protectors (Reconfirmed 2014) |
| AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
| AS 4024.1703-2006 | Safety of machinery Principles for determining the dimensions required for access openings |
| AS 4024.1904-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
| AS 4024.1802-2006 | Safety of machinery Safety distances and safety gaps - Safety distances to prevent danger zones being reached by the lower limbs |
| AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
| AS/NZS 4576:1995 | Guidelines for scaffolding |
| AS 4024.1602-2006 | Safety of machinery Interlocking devices associated with guards - Principles for design and selection |
| AS 4202-1994 | Insulating covers for electrical purposes |
| AS 4024.1702-2006 | Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery |
| AS/NZS 2161.4:1999 | Occupational protective gloves Protection against thermal risks (heat and fire) (Reconfirmed 2016) |
| AS/NZS 1801:1997 | Occupational protective helmets |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS/NZS 61558.2.23:2001 | Safety of power transformers, power supply units and similar devices Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD) |
| AS/NZS 1892.3:1996 | Portable ladders Reinforced plastic |
| AS 4024.1906-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators |
| AS/NZS 4804:2001 | Occupational health and safety management systems - General guidelines on principles, systems and supporting techniques (Reconfirmed 2020) |
| AS 4024.1601-2006 | Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
| AS 4024.1903-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators |
| AS 61010.1-2003 | Safety requirements for electrical equipment for measurement, control and laboratory use General requirements (IEC 61010-1:2001, MOD) (Reconfirmed 2016) |
| AS/NZS 3760:2010 | In-service safety inspection and testing of electrical equipment |
| AS/NZS 61558.2.9:2003 | Safety of power transformers, power supply units and similar products Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002, MOD) |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
| AS/NZS 61558.1:2000 | |
| AS/NZS 61558.2.7:2008 | Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for transformers and power supplies for toys (Reconfirmed 2020) |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.