ASCE/EWRI 12-13, 13-13, 14-13 : 2013
Current
The latest, up-to-date edition.
STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE
Hardcopy , PDF
English
01-01-2013
Standard Guidelines for the Design of Urban Subsurface
Drainage, ANSI/ASCE/EWRI 12-13
FOREWORD
ACKNOWLEDGMENTS
1 Scope
2 Definitions
3 Site Analysis
4 System Configuration
5 Drain Envelopes
6 Hydraulics and Hydrology
7 Structural Considerations
8 Materials
9 Codes and Permits
10 References
Standard Guidelines for the Installation of Urban
Subsurface Drainage, ANSI/ASCE/EWRI 13-13
FOREWORD
ACKNOWLEDGMENTS
1 Scope
2 Definitions
3 Contract Documents
4 Site Investigation
5 Installation
6 Inspection
7 References
Appendix A - Recommended Use of Trench Boxes
Standard Guidelines for the Operation and Maintenance of
Urban Subsurface Drainage, ANSI/ASCE/EWRI 14-13
FOREWORD
ACKNOWLEDGMENTS
1 Scope
2 Definitions
3 Operation and Maintenance Plan
4 Water Quality
5 Periodic Inspection
6 Maintenance
7 References
Index
Prepared by the Urban Drainage Standards Committee of the Standards Development Council of the Environmental and Water Resources Institute of ASCE.
DevelopmentNote |
This is a single-volume set of three Standards - ASCE/EWRI 12-13, ASCE/EWRI 13-13 and ASCE/EWRI 14-13. 2005 Edition is also available; See: ASCE 12 05, ASCE 13 05 and ASCE 14 05. (11/2013)
|
DocumentType |
Standard
|
ISBN |
9780784477939
|
Pages |
108
|
PublisherName |
American Society of Civil Engineers
|
Status |
Current
|
Supersedes |
AASHTO M 242M/M 242 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE |
AWWA C905 : 2010 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION |
ASCE 15 98 : 2000 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
ASTM D 7498/D7498M : 2009 : R2014 : EDT 1 | Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test |
ASTM D 3034 : 2016 : REDLINE | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM A 760/A760M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
AASHTO M 274 : 1987 | SPECIFICATION FOR STEEL SHEET, ALUMINUM-COATED (TYPE 2), FOR CORRUGATED STEEL PIPE |
ASTM B 745/B745M : 2015 : REDLINE | Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains |
ASCE 45 05 : 2006 | Standard Guidelines for the Design (45-05), Installation (46-05), and Operation and Maintenance (47-05) of Urban Stormwater Systems |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
AASHTO M 294 : 2015 | SPECIFICATION FOR CORRUGATED POLYETHYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
ASTM C 444M : 2017 : REDLINE | Standard Specification for Perforated Concrete Pipe (Metric) |
ASTM C 4 : 2004 | Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile |
ASTM F 679 : 2016 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
ASCE 28 00 : 2001 | STANDARD PRACTICE FOR DIRECT DESIGN OF PRECAST CONCRETE BOX SECTIONS FOR JACKING IN TRENCHLESS CONSTRUCTION |
AASHTO M 170M : 2015 | SPECIFICATION FOR REINFORCED CONCRETE CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
ASTM C 412M : 2015 : REDLINE | SPECIFICATION FOR CONCRETE DRAIN TILE [METRIC] |
ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
ASTM C 654M : 2015 : REDLINE | SPECIFICATION FOR POROUS CONCRETE PIPE [METRIC] |
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 | Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
AASHTO M 207M/M 207 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT, STORM DRAIN, AND SEWER PIPE |
AASHTO M 252 : 2009 | SPECIFICATION FOR CORRUGATED POLYETHYLENE DRAINAGE PIPE |
ASTM A 849 : 2015 : REDLINE | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
ASCE/EWRI 33 09 : 2009 | COMPREHENSIVE TRANSBOUNDARY WATER QUALITY MANAGEMENT AGREEMENT WITH GUIDELINES FOR DEVELOPMENT OF A MANAGEMENT PLAN, STANDARDS, AND CRITERIA |
ASTM D 6917 : 2016 : REDLINE | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
AASHTO M 206M/M 206 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE ARCH CULVERT, STORM DRAIN, AND SEWER PIPE |
ASTM D 2241 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
ASTM A 761/A761M : 2017-02 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
ASTM C 505M : 2015 : REDLINE | SPECIFICATION FOR NONREINFORCED CONCRETE IRRIGATION PIPE WITH RUBBER GASKET JOINTS [METRIC] |
ASTM C 118M : 2015 : REDLINE | SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE [METRIC] |
ASTM D 2751 : 2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
AASHTO M 167M/M 167 : 2014 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
ASTM A 762/A762M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
ASTM F 2562/F2562M : 2015 : REDLINE | Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
AASHTO M 196 : 1992 | SPECIFICATION FOR CORRUGATED ALUMINUM PIPE FOR SEWERS AND DRAINS |
CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
ASTM D 1621 : 2016 : REDLINE | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
AASHTO M 245 : 2000 | SPECIFICATION FOR CORRUGATED STEEL PIPE, POLYMER-PRECOATED, FOR SEWERS AND DRAINS |
AWWA C303 : 2017 | CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
ASCE 26 97 : 2000 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE BOX SECTIONS |
AASHTO M 145 : 1991 | SPECIFICATION FOR CLASSIFICATION OF SOILS AND SOIL-AGGREGATE MIXTURES FOR HIGHWAY CONSTRUCTION PURPOSES |
ASTM D 3035 : 2015 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
AASHTO M 190 : 2000 | SPECIFICATION FOR ASPHALT-COATED CORRUGATED METAL CULVERT PIPE AND PIPE-ARCHES |
ASTM C 361M : 2016 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE [METRIC] |
AWWA C900 : 2016 | POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
ASTM D 4595 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM F 949 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
ASTM D 4716/D4716M : 2014 : REDLINE | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM F 758 : 2014 : REDLINE | Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
ASCE 27 00:2000 | STANDARD PRACTICE OF DIRECT DESIGN OF PRECAST CONCRETE PIPE FOR JACKING IN TRENCHLESS CONSTRUCTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.