• There are no items in your cart

CFR 29(PT1926) : 0

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION

Superseded date

04-12-2019

DocumentType
Standard
PublisherName
Code of Federal Regulations
Status
Superseded
SupersededBy
Supersedes

IEEE 902-1998 IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book)
MIL-DTL-24607 Revision B:2008 ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS
MIL-DTL-1115 Revision E:2010 ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30)
ANSI A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
NASA SSTD 8070 0119 : 2009 DIG PERMIT STANDARD (FORM SSC-618)
API 1117 : 2008 : INC : ERR 2 : 2009 : R2013 RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES
ANSI/ASSE A10.22 : 2007 : R2012 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
ANSI A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
ANSI/ASSE A10.22 : 2007 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
ANSI A10.22 : 2007 : R2012 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
TT-P-645 Revision C:2013 PAINT, ALKYD TYPE, FORMULA NUMBER 84
API RP 74 : 2001 : R2007 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ACI SP 4 : 2014 FORMWORK FOR CONCRETE
NFPA 1006 : 2017 TECHNICAL RESCUE PERSONNEL PROFESSIONAL QUALIFICATIONS
ASCE/EWRI 12-13, 13-13, 14-13 : 2013 STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
IEEE 1657-2009 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
NETA ECS : 2015 ELECTRICAL COMMISSIONING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
UFC 3-520-05 : Change 1 UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS
UFC 3-550-07 : 2017 UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS
PIP STS02465 : 2012 AUGERED CAST-IN-PLACE PILES INSTALLATION SPECIFICATION
SSPC-GUIDE 12 : 2016 GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS
API RP 2207 : 2017 PREPARING TANK BOTTOMS FOR HOT WORK
NFPA 326 : 2015 SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR
EM 385-1-1 : 20031103 SAFETY - SAFETY AND HEALTH REQUIREMENTS
ANSI Z49.1 : 2012 SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES
API 1117:2008 RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES
MIL HDBK 1025/10 : 0 SAFETY OF ELECTRICAL TRANSMISSION AND DISTRIBUTION SYSTEMS
ASTM E 2706 : 2018 Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements
ANSI/ASSE A10.19 : 2008 SAFETY REQUIREMENTS FOR PILE INSTALLATION AND EXTRACTION OPERATIONS
ANSI A10.5 : 2013 SAFETY REQUIREMENTS FOR MATERIAL HOISTS
ASTM D 7886 : 2014 Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
ASCE/CI 36 15 : 2015 STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING
ASTM C 1840/C1840M : 2017 Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
ASTM C 1821/C1821M : 2016 Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
ASTM E 1628 : 1994 : R2000 Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration
UFC 3-410-04N : 2004 UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION
PIP PLSC0011 : 2017 TRENCHING AND EXCAVATION FOR PIPELINES
IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
ANSI A10.5 : 2013 SAFETY REQUIREMENTS FOR MATERIAL HOISTS
NFPA 56 : 2017 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
MIL-PRF-23236 Revision D:2009 Coating Systems for Ship Structures
API 2217A : 2009 SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
SSPC-GUIDE 6 : 2015 GUIDE FOR CONTAINING SURFACE PREPARATION DEBRIS GENERATED DURING PAINT REMOVAL OPERATIONS
ANSI/ASSE A10.27 : 1998 SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES
API RP 74 : 2001 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ANSI A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
ANSI A10.22 : 2007 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
NFPA 475 : 2017 RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM
ANSI A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
NFPA 350 : 2016 SAFE CONFINED SPACE ENTRY AND WORK
ANSI/ASSE A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
ANSI/ASSE A10.47 : 2015 WORK ZONE SAFETY FOR HIGHWAY CONSTRUCTION
NACE RP 02 97 : 2004 MAINTENANCE PAINTING OF ELECTRICAL SUBSTATION APPARATUS INCLUDING FLOW COATING OF TRANSFORMER RADIATORS
ASTM E 1628 : 1994 : R2008 Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration (Withdrawn 2014)
API 2610 : 2005 : R2010 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
NASA KSC E 166 : 2009 INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
NASA KSC STD Z 0004 : 2002 STRUCTURAL DESIGN, STANDARD FOR
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA SSTD 8070 0081 : 2001 FACILITY ELECTRICAL STANDARD
NASA SSTD 8070 0047 : 2016 STANDARD FOR STAINLESS STEEL PIPING SYSTEMS AA, ACK1, ACK4, ACK6, B, BCK1, BCK3, BCK4, BCK6, BCK10, C, EE, G, H, JJ, K3, L1, L2, NCK1, NCK2, NCK3, NCK10, NCK11, P, R, T, AND Z
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
FED-STD-313 Revision D:1996 MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
API RP 1646 : 2017 SAFE WORKING PRACTICES FOR CONTRACTORS WORKING AT RETAIL PETROLEUM/CONVENIENCE FACILITIES
A-A-59918 Revision B:2014 SELF PROPELLED CONCRETE SAW (SPCS)
ANSI/ASSE A10.27 : 1998 : R2011 SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
MIL-B-13207 Revision D:1976 BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR
API 2027 : 2002 : R2007 IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE
ANSI/ASSE A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
FAA 3900.65 : 2014 FLIGHT STANDARDS SERVICE (AFS) FALL PROTECTION PROGRAM (FPP)
NACE SP 02 97 : 2012 MAINTENANCE PAINTING OF ELECTRICAL SUBSTATION APPARATUS INCLUDING FLOW COATING OF TRANSFORMER RADIATORS
ANSI/ASSE A10.26 : 2011 EMERGENCY PROCEDURES FOR CONSTRUCTION AND DEMOLITION SITES
ANSI/ASSE TR A1264.3 : 2007 USING VARIABLE ANGLE TRIBOMETERS (VAT) FOR MEASUREMENT OF THE SLIP RESISTANCE OF WALKWAY SURFACES
ANSI/ASSE A10.22 : 2007 : R2012 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
ASTM E 2950 : 2014 Standard Specification for Metal Canopy Systems
API RP 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 2610:2005 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
ANSI E1.39 : 2015 ENTERTAINMENT TECHNOLOGY - SELECTION AND USE OF PERSONAL FALL ARREST SYSTEMS ON PORTABLE STRUCTURES USED IN THE ENTERTAINMENT INDUSTRY
FAA 3900.69 : 2016 FLIGHT STANDARDS SERVICE AIRCRAFT ACCIDENT INVESTIGATION SAFETY PROGRAM
SSPC-TU 7 : 2015 CONDUCTING AMBIENT AIR, SOIL, AND WATER SAMPLING OF SURFACE PREPARATION AND PAINT DISTURBANCE ACTIVITIES
MIL-PRF-16173 Revision E:1993 CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
API 2200 REDLINE : 2010 REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES
API RP 2027 : 2002 IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE
API RP 74 : 2001 : R2013 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ANSI/ASSE A10.27 : 1998 : R2005 SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES
NFPA 56 (PS) : 2012 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
ANSI/ASSE A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
API 2027 : 2002 : R2012 IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE
ASTM F 1159 : 2016 : REDLINE Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
ANSI/ASSE A10.22 : 2007 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
ANSI/ASSE A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
ASTM E 2345 : 2004 Standard Practice for Investigating Electrical Incidents (Withdrawn 2004)
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE 45-5 : 2014 ELECTRICAL INSTALLATIONS ON SHIPBOARD - SAFETY CONSIDERATIONS
PIP STS03001 : 2017 PLAIN AND REINFORCED CONCRETE SPECIFICATION
PIP STS05130 : 2011 STRUCTURAL AND MISCELLANEOUS STEEL ERECTION SPECIFICATION
PIP STC01015 : 2017 STRUCTURAL DESIGN CRITERIA
ASME STP-SA-055 : 2012 GUIDE TO MOBILE CRANE STANDARDS
PIP STE02465 : 2012 AUGERED CAST-IN-PLACE PILES DESIGN GUIDE
PIP STS05120 : 2011 STRUCTURAL AND MISCELLANEOUS STEEL FABRICATION SPECIFICATION
PIP ARS13120 : 2014 PRE-ENGINEERED METAL BUILDINGS SPECIFICATION
PIP CVS02100 : 2014 SITE PREPARATION, EXCAVATION, AND BACKFILL SPECIFICATION

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.