ASTM A 204/A204M : 2017 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
English
03-11-2017
CONTAINED IN VOL. 01.04, 2017 Defines molybdenum-alloy steel plates, intended particularly for welded boilers and other pressure vessels.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes ASTM A 204 (06/2000)
|
| DocumentType |
Redline
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification2 covers molybdenum-alloy steel plates, intended particularly for welded boilers and other pressure vessels.
1.2Plates under this specification are available in three grades having different strength levels as follows:
| Grade | Tensile Strength, ksi [MPa] |
| A | 65–85 [450–585] |
| B | 70–90 [485–620] |
| C | 75–95 [515–655] |
1.3The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements.
1.4The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| MIL-DTL-43719 Revision D:2009 | Marking Materials and Markers, Adhesive, Elastomeric, Pigmented; General Specification for |
| ASTM A 691 : 1998 : R2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MIL-DTL-24299 Revision B:2017 | Heaters, Lubrication Oil and Fuel, Electric Naval Shipboard |
| BS 4504-3.1:1989 | Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B31.3:2016 | PROCESS PIPING |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| ASTM A 691 : 1998 : R2007 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM A 672/A672M : 2014 : REDLINE | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| 00/716563 DC : DRAFT NOV 2000 | EN 1759-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24 |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ASTM A 435/A435M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM A 577/A577M : 2017 : REDLINE | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| ASTM A 578/A578M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.