ASTM C 110 : 2024
Current
The latest, up-to-date edition.
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
Hardcopy , PDF
English
28-06-2024
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 07
|
| DocumentType |
Test Method
|
| Pages |
26
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.2
Note 1:Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C50).
1.2The test methods appear in the following order:
| Plastic Property Testing | |
| Standard Consistency of Lime Putty | 5 |
| Plasticity of Lime Putty | 6 |
| Water Retention of Hydrated Lime | 7 |
| Air Entrainment | 8 |
| Soundness Testing | |
| Autoclave Expansion of Hydrated and Hydraulic Lime | 9 |
| Popping and Pitting of Hydrated Lime | 10 |
| Application Testing | |
| Slaking Rate of Quicklime | 11 |
| Dry Brightness of Pulverized Limestone | 12 |
| Limestone Grindability Determination by the Laboratory Ball Mill | 13 |
| Settling Rate of Hydrated Lime | 14 |
| Particle Size Analysis | |
| Residue and Sieve Analysis | 15 |
| Sieve Analysis of Dry Limestone, Quicklime, and Hydrated Lime | 16 |
| Fineness of Pulverized Quicklime and Hydrated Lime by Air | 17 |
| Particle Size of Pulverized Limestone | 18 |
| Dry Screening of Hydrated Lime, Pulverized Quicklime, and | 19 |
| Wet Sieve Analysis of Agricultural Liming Materials | 20 |
| Density Measurement | |
| Apparent Loose Density of Hydrated Lime, Pulverized Quicklime, | 21 |
| Apparent Packed Density of Hydrated Lime, Pulverized Quicklime, | 22 |
| Relative Density (Specific Gravity) of Hydrated Lime Products | 23 |
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 141/C141M : 2014 : R2022 | Standard Specification for Hydrated Hydraulic Lime for Structural Purposes |
| ASTM C 206 : 2014 : R2022 | Standard Specification for Finishing Hydrated Lime |
| ASTM C 1707 : 2018 | Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes |
| ASTM C 737 : 2022 | Standard Specification for Limestone for Dusting of Coal Mines |
| ASTM C 1164 : 2022 | Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source |
| ASTM C 1797 : 2023 : REV A | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
| ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM C 911 : 2019 | Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses |
| ASTM D 5050 : 2008 : R2023 | Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts |
| ASTM C 602 : 2023 | Standard Specification for Agricultural Liming Materials |
| ASTM C 977 : 2018 : R2024 | Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization |
| ASTM E 1266 : 2020 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 6249 : 2019 : R2024 | Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals |
| ASTM C 1489 : 2015 : R2022 | Standard Specification for Lime Putty for Structural Purposes |
| ASTM C 5 : 2024 | Standard Specification for Quicklime for Structural Purposes |
| ASTM C 1318 : 2015 : REV A : R2020 | Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD) |
| ASTM C 1713 : 2023 | Standard Specification for Mortars for the Repair of Historic Masonry |
| ASTM C 50/C50M : 2013 : R2019 | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
| ASTM D 546 : 2017 | Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
| ASTM E 11 : 2024 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM C 430 : 2017 | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| ASTM C 192/C192M : 2024 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM C 430 : 2024 | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| ASTM C 207 : 2024 | Standard Specification for Hydrated Lime for Masonry Purposes |
| ASTM C 192/C192M : 2019 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.