Skip to content
Please enter a keyword to search

  • ASTM C 1644 : 2006 : R2017

    Current The latest, up-to-date edition.

    Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-11-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 04.05, 2017 Describes the minimum performance and material requirements for resilient connectors used for connections between reinforced concrete tanks used for septic effluent treatment/detention, including those referenced in Specifications C 913 and C 1227.

    Scope - (Show below) - (Hide below)

    1.1This specification covers the minimum performance and material requirements for resilient connectors used for connections between reinforced concrete tanks used for septic effluent treatment/detention, including those referenced in Specifications C913 and C1227.

    1.1.1These connectors are designed to eliminate leakage between the pipe(s) and tank.

    1.2A complete metric companion to Specification C1644 has been developed—C1644M; therefore, no metric equivalents are presented in this specification.

    Note 1:This specification covers the design, material, and performance of the resilient connection only. Connections covered by this specification are adequate for hydrostatic pressures up to 5 psi (11.5 ft) without leakage when tested in accordance with Section 7. Infiltration or exfiltration quantities for an installed system are dependent upon many factors other than the connectors between tanks and pipes, and allowable quantities must be covered by other specifications and suitable testing of the installed pipe and system.

    1.3The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee C 27
    Document Type Standard
    Product Note Reconfirmed 2017
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM C 1227 : 2013 Standard Specification for Precast Concrete Septic Tanks

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1566 : 2004 : REV A Standard Terminology Relating to Rubber
    ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM C 1227 : 2009 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
    ASTM D 1566 : 2009 Standard Terminology Relating to Rubber
    ASTM D 883 : 2023 Standard Terminology Relating to Plastics
    ASTM D 1566 : 2006 Standard Terminology Relating to Rubber
    ASTM D 1566 : 2008 : REV A Standard Terminology Relating to Rubber
    ASTM D 1566 : 2021 : REV A Standard Terminology Relating to Rubber
    ASTM C 822 : 2021 Standard Terminology Relating to Concrete Pipe and Related Products
    ASTM D 1149 : 2016 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
    ASTM C 1227 : 2010 : REV A Standard Specification for Precast Concrete Septic Tanks
    ASTM C 913 : 2021 Standard Specification for Precast Concrete Water and Wastewater Structures
    ASTM C 1227 : 2022 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2005 Standard Terminology Relating to Rubber
    ASTM A 240/A240M : 2011 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 883 : 2024 Standard Terminology Relating to Plastics
    ASTM D 1566 : 2002 : REV A Standard Terminology Relating to Rubber
    ASTM C 1227 : 2007 : REV C Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1149 : 2016-02 TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT
    ASTM D 1566 : 2007 Standard Terminology Relating to Rubber
    ASTM C 913 : 2023 Standard Specification for Precast Concrete Water and Wastewater Structures
    ASTM D 1566 : 2019 Standard Terminology Relating to Rubber
    ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 1566 : 2015 Standard Terminology Relating to Rubber
    ASTM A 240/A240M : 2005 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 543 : 2014 : REDLINE Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
    ASTM D 883 : 2022 Standard Terminology Relating to Plastics
    ASTM C 1227 : 2000 : REV A Standard Specification for Precast Concrete Septic Tanks
    ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
    ASTM C 1227 : 2003 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2008 Standard Terminology Relating to Rubber
    ASTM D 1149 : 2015 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
    ASTM D 1566 : 2005 : REV A Standard Terminology Relating to Rubber
    ASTM D 543 : 2021 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
    ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
    ASTM C 1227 : 2000 : REV B Standard Specification for Precast Concrete Septic Tanks
    ASTM C 1227 : 2023 Standard Specification for Precast Concrete Septic Tanks
    ASTM C 1227 : 2002 Standard Specification for Precast Concrete Septic Tanks
    ASTM C 1227 : 2002 : REV B Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1149 : 2007 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
    ASTM C 822 : 2020 Standard Terminology Relating to Concrete Pipe and Related Products
    ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 1566 : 2006 : REV A Standard Terminology Relating to Rubber
    ASTM D 1566 : 2003 : REV A Standard Terminology Relating to Rubber
    ASTM C 1227 : 2005 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
    ASTM A 240/A240M : 2022 : REV B Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 1566 : 2006 : REV B Standard Terminology Relating to Rubber
    ASTM C 1227 : 2008 Standard Specification for Precast Concrete Septic Tanks
    ASTM A 240/A240M : 2023 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM A 240/A240M : 2022 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
    ASTM D 1566 : 2005 : REV B Standard Terminology Relating to Rubber
    ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
    ASTM D 1566 : 2011 Standard Terminology Relating to Rubber
    ASTM C 913 : 2016-07 SPECIFICATION FOR PRECAST CONCRETE WATER AND WASTEWATER STRUCTURES
    ASTM D 2240 : 2015 : R2021 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
    ASTM C 1227 : 2007 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2000 : REV B Standard Terminology Relating to Rubber
    ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 1566 : 2014 Standard Terminology Relating to Rubber
    ASTM D 543 : 2020 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
    ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 1149 : 2007 : R2012 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
    ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM C 1227 : 2007 : REV B Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1149 : 1978 : REV A Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
    ASTM D 1566 : 2010 Standard Terminology Relating to Rubber
    ASTM A 240/A240M : 2022 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
    ASTM A 240/A240M : 2020 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM C 1227 : 2020 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM C 1227 : 2013 : REDLINE Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2003 Standard Terminology Relating to Rubber
    ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
    ASTM C 1227 : 2012 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2000 Standard Terminology Relating to Rubber
    ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM C 1227 : 2010 Standard Specification for Precast Concrete Septic Tanks
    ASTM C 1227 : 2002 : REV A Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2015 : REDLINE TERMINOLOGY RELATING TO RUBBER
    ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
    ASTM D 1566 : 2007 : REV A Standard Terminology Relating to Rubber
    ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
    ASTM D 1566 : 2005 : REV C Standard Terminology Relating to Rubber
    ASTM C 913 : 2018 Standard Specification for Precast Concrete Water and Wastewater Structures
    ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
    ASTM C 1227 : 2007 : REV A Standard Specification for Precast Concrete Septic Tanks
    ASTM A 240/A240M : 2023 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 1566 : 2010 : EDT 1 Standard Terminology Relating to Rubber
    ASTM D 1149 : 1999 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
    ASTM D 746 : 2014 : REDLINE Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
    ASTM C 1227 : 2013 Standard Specification for Precast Concrete Septic Tanks
    ASTM D 1566 : 2008 : REV B Standard Terminology Relating to Rubber
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective