ASTM C 461 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
Hardcopy , PDF
18-10-2023
English
14-09-2017
Committee |
C 16
|
DocumentType |
Test Method
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1These test methods cover procedures for sampling and testing mastics and coatings for use as weather and vapor barrier finishes on thermal insulations and for other accessory use.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3The test methods appear in the following order:
Section | |
Sampling | 4 |
Uniformity and Storage Stability | 5 |
Stability Under Freezing | 6 |
Density and Weight per Gallon | 7 |
Consistency | 8 |
Solids Content | 9 |
Content of Volume Solids and Coverage of Mastics and Coatings | 10 |
Sag Resistance (Build) | 11 |
Drying Time | 12 |
Flash Point | 13 |
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1483/C1483M : 2017 : R2022 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
ASTM C 419 : 2020 | Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings |
ASTM C 647 : 2019 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
ASTM D 2196 : 2015 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
ASTM D 3278 : 2020 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
ASTM D 1475 : 2013 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2196 : 2010 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
ASTM D 1475 : 1998 : R2012 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2196 : 2005 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
ASTM D 1475 : 1985 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products |
ASTM D 2369 : 1998 | Standard Test Method for Volatile Content of Coatings |
ASTM D 3278 : 1996 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 93 : 2019 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
ASTM D 2369 : 1981 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
ASTM D 2369 : 2001 | Standard Test Method for Volatile Content of Coatings |
ASTM D 1475 : 1998 : R2003 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2369 : 2010 | Standard Test Method for Volatile Content of Coatings |
ASTM D 93 : 1990 : EDT 1 | Standard Test Methods for Flash Point by Pensky-Martens Closed Tester |
ASTM D 3278 : 1982 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus |
ASTM D 3278 : 2021 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 56 : 2021 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
ASTM D 2369 : 2020 | Standard Test Method for Volatile Content of Coatings |
ASTM D 1475 : 1960 : R1968 | Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products |
ASTM D 2196 : 2018 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess |
ASTM D 56 : 2016 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
ASTM D 2369 : 2007 | Standard Test Method for Volatile Content of Coatings |
ASTM D 1475 : 1998 : R2008 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2369 : 2010 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
ASTM D 2369 : 1993 | Standard Test Method for Volatile Content of Coatings |
ASTM D 56 : 2021 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
ASTM D 93 : 2000 | Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester |
ASTM D 93 : 1985 | Standard Test Method for Flash Point by Pensky-Martens Closed Tester |
ASTM D 56 : 2022 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
ASTM D 2369 : 1995 | Standard Test Method for Volatile Content of Coatings |
ASTM D 2369 : 2004 | Standard Test Method for Volatile Content of Coatings |
ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
ASTM D 56 : 1987 | Standard Test Method for Flash Point by Tag Closed Tester |
ASTM D 2369 : 1990 | Standard Test Method for Volatile Content of Coatings |
ASTM D 2196 : 2018 : EDT 1 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
ASTM D 2369 : 2003 | Standard Test Method for Volatile Content of Coatings |
ASTM D 1475 : 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2369 : 2010 : R2015 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
ASTM D 3278 : 1996 : R2004 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 2196 : 1999 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
ASTM D 93 : 1997 | Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester |
ASTM D 2369 : 1987 | Standard Test Method for Volatile Content of Coatings |
ASTM D 2369 : 2001 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
ASTM D 2369 : 1992 | Standard Test Method for Volatile Content of Coatings |
ASTM D 3278 : 1996 : R2011 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
ASTM D 93 : 2018 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.