![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 859 : 2022
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Terminology Relating to Nuclear Materials
Hardcopy , PDF
23-08-2022
English
08-03-2022
Committee |
C 26
|
DocumentType |
Reference Material
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This terminology standard contains terms, definitions, descriptions of terms, nomenclature, and explanations of acronyms and symbols specifically associated with standards under the jurisdiction of Committee C26 on Nuclear Fuel Cycle. The content of this terminology standard may also be applicable to documents not under the jurisdiction of Committee C26, in which case this terminology standard may be referenced in those documents.
1.2While subcommittees within Committee C26 are free to only provide terms and definitions within individual standards, each subcommittee may request the addition of utilized terms and definitions to this terminology standard if it believes that such serves the broader interest of Committee C26 and the nuclear fuel cycle profession. Therefore, terms and definitions proposed for inclusion in Terminology C859 need not be used in more than one committee standard before being considered.
1.3In general, technical terms that are defined in common dictionaries would not also be defined in this terminology standard unless there is a need to emphasize a specific definition in making appropriate use of a Committee C26 standard.
1.4Subcommittee C26.10 (Nondestructive Assay) also has a terminology standard applicable to its standards: Terminology C1673.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1636 : 2022 | Standard Guide for Determination of Uranium-232 in Uranium Hexafluoride |
ASTM C 1098 : 2008 : R2022 | Standard Specification for Nuclear-Grade Hafnium Oxide Powder |
ASTM C 1022 : 2017 : R2022 | Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate |
ASTM C 1076 : 2009 : R2022 | Standard Specification for Nuclear Grade Hafnium Oxide Pellets |
ASTM C 1267 : 2017 : R2022 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 776 : 2017 : R2022 | Standard Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors |
ASTM C 1066 : 2009 : R2015 | Standard Specification for Nuclear Grade Zirconium Oxide Pellets |
ASTM C 1562 : 2010 : R2018 | Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems |
ASTM C 1387 : 2014 | Standard Guide for the Determination of Technetium-99 in Soil |
ASTM C 1165 : 2017 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<inf>2</inf>SO<inf>4</inf> at a Platinum Working Electrode |
ASTM C 1663 : 2018 | Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test |
ASTM C 1725 : 2017 | Standard Guide for Hot Cell Specialized Support Equipment and Tools |
ASTM C 799 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions |
ASTM C 1553 : 2021 | Standard Guide for Drying of Spent Nuclear Fuel |
ASTM C 1217 : 2000 : R2020 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
ASTM C 696 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets |
ASTM C 1572/C1572M : 2018 | Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities |
ASTM D 3084 : 2020 | Standard Practice for Alpha-Particle Spectrometry of Water |
ASTM C 1474 : 2019 | Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry |
ASTM C 1413 : 2018 | Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry |
ASTM C 1590 : 2021 | Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry |
ASTM C 1462 : 2021 | Standard Specification for Uranium Metal Enriched to Less Than 20 % <sup> 235</sup >U |
ASTM C 1022 : 2017 | Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate |
ASTM C 968 : 2019 | Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets |
ASTM C 784 : 2020 | Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets |
ASTM C 752 : 2018 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
ASTM C 753 : 2016 : REV A : R2021 | Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder |
ASTM C 791 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide |
ASTM C 1533 : 2015 | Standard Guide for General Design Considerations for Hot Cell Equipment |
ASTM C 1267 : 2017 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 1268 : 2015 | Standard Test Method for Quantitative Determination of <sup>241</sup>Am in Plutonium by Gamma-Ray Spectrometry |
ASTM D 6323 : 2019 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
ASTM C 787 : 2020 | Standard Specification for Uranium Hexafluoride for Enrichment |
ASTM C 1068 : 2021 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 833 : 2017 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors |
ASTM C 1907 : 2021 | Standard Practice for Preparation of Plutonium Materials by Pyrohydrolysis for Determination of Fluoride, Chloride, or Both |
ASTM C 996 : 2020 | Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % <sup > 235</sup>U |
ASTM C 1477 : 2019 | Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry |
ASTM C 1672 : 2017 | Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1429 : 2021 | Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer |
ASTM C 1174 : 2020 | Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste |
ASTM C 750 : 2018 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
ASTM C 998 : 2017 | Standard Practice for Sampling Surface Soil for Radionuclides |
ASTM C 1220 : 2021 | Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste |
ASTM C 1408 : 2016 | Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
ASTM C 759 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions |
ASTM C 1052 : 2020 | Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride |
ASTM C 1189 : 2011 : R2018 | Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors |
ASTM C 1163 : 2014 | Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride |
ASTM C 1853 : 2017 | Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O<inf>2</inf>) Sintered Pellets by Direct Combustion-Infrared Detection Method |
ASTM C 1233 : 2015 : R2021 | Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials |
ASTM C 1457 : 2018 | Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction |
ASTM C 999 : 2017 | Standard Practice for Soil Sample Preparation for the Determination of Radionuclides |
ASTM C 1883 : 2019 | Standard Practice for Sampling of Gaseous Enriched Uranium Hexafluoride |
ASTM E 706 : 2016 | Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards |
ASTM C 698 : 2016 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>) |
ASTM C 1031 : 2011 : R2016 | Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
ASTM C 1065 : 2008 : R2015 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
ASTM C 1307 : 2021 | Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry |
ASTM C 788 : 2003 : R2021 | Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals |
ASTM C 1254 : 2018 | Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence |
ASTM C 708 : 2016 | Standard Specification for Nuclear-Grade Beryllium Oxide Powder (Withdrawn 2024) |
ASTM E 521 : 2016 | Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation |
ASTM C 1909 : 2021 | Standard Test Method for Moisture Analysis of Plutonium Dioxide (PuO<inf>2</inf>) by Thermogravimetric Mass Spectrometry (TGA-MS) |
ASTM C 888 : 2018 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf >) Powder |
ASTM C 1128 : 2018 | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1287 : 2018 | Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry |
ASTM C 1334 : 2005 : R2016 : EDT 1 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
ASTM C 992 : 2020 : REV A | Standard Specification for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment |
ASTM C 1871 : 2022 | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
ASTM C 1750 : 2021 | Standard Guide for Development, Verification, Validation, and Documentation of Simulants for Hazardous Materials and Process Streams |
ASTM C 1508 : 2018 | Standard Test Method for Determination of Bromine and Chlorine in UF<inf>6</inf> and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy |
ASTM C 1637 : 2021 | Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis |
ASTM C 757 : 2016 : R2021 | Standard Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors |
ASTM C 1720 : 2021 | Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses |
ASTM C 1880 : 2019 | Standard Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets |
ASTM D 5928 : 2018 : REV A | Standard Practice for Screening of Waste for Radioactivity |
ASTM C 1463 : 2019 | Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis |
ASTM C 1913 : 2021 | Standard Practice for Sampling Gaseous Uranium Hexafluoride Using Zeolite in Single-Use Destructive Assay Sampler |
ASTM E 910 : 2018 | Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance |
ASTM C 697 : 2016 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets |
ASTM C 1428 : 2018 | Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method |
ASTM C 1832 : 2022 | Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer |
ASTM C 1843 : 2016 : R2022 | Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate |
ASTM C 1816 : 2016 | Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis |
ASTM C 1009 : 2021 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1769 : 2015 | Standard Practice for Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup (Withdrawn 2023) |
ASTM C 1432 : 2015 | Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
ASTM C 1156 : 2018 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1215 : 2018 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
ASTM C 1689 : 2021 | Standard Practice for Subsampling of Uranium Hexafluoride |
ASTM C 785 : 2008 : R2015 | Standard Specification for Nuclear-Grade Aluminum Oxide Pellets |
ASTM C 1076 : 2009 : R2015 | Standard Specification for Nuclear Grade Hafnium Oxide Pellets |
ASTM C 1346 : 2019 | Standard Practice for Dissolution of UF<inf>6</inf> from P-10 Tubes |
ASTM C 1742 : 2017 | Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method (Withdrawn 2023) |
ASTM C 889 : 2018 | Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf>) Powder |
ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
ASTM C 1845 : 2016 | Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
ASTM C 922 : 2021 | Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets for Light Water Reactors |
ASTM C 1647 : 2020 | Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials |
ASTM C 1255 : 2018 | Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy |
ASTM C 776 : 2017 | Standard Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors |
ASTM C 1168 : 2015 | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
ASTM C 1517 : 2016 | Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy |
ASTM C 1475 : 2017 | Standard Guide for Determination of Neptunium-237 in Soil |
ASTM C 1844 : 2016 | Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution |
ASTM C 1210 : 2021 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry |
ASTM D 3865 : 2009 : R2015 | Standard Test Method for Plutonium in Water (Withdrawn 2024) |
ASTM C 758 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM C 1285 : 2021 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
ASTM C 1817 : 2016 | Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry |
ASTM C 1098 : 2008 : R2015 | Standard Specification for Nuclear-Grade Hafnium Oxide Powder |
ASTM C 1770 : 2021 | Standard Test Method for Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide |
ASTM C 1662 : 2018 | Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method |
ASTM C 1453 : 2019 | Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets |
ASTM C 1430 : 2018 | Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration |
ASTM C 1108 : 2017 | Standard Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1507 : 2020 | Standard Test Method for Radiochemical Determination of Strontium-90 in Soil |
ASTM C 1411 : 2020 | Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
ASTM C 761 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride |
ASTM C 1284 : 2018 | Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry |
ASTM C 1733 : 2021 | Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method |
ASTM C 1187 : 2020 : REV A | Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment |
ASTM C 1682 : 2021 | Standard Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal |
ASTM C 1502 : 2016 | Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
ASTM C 1842 : 2016 | Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy |
ASTM C 1109 : 2010 : R2015 | Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM E 942 : 2016 | Standard Guide for Investigating the Effects of Helium in Irradiated Metals |
ASTM D 3972 : 2009 : R2015 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry (Withdrawn 2024) |
ASTM C 1075 : 2017 | Standard Practices for Sampling Uranium-Ore Concentrate |
ASTM C 1415 : 2018 | Standard Test Method for <sup>238</sup>Pu Isotopic Abundance By Alpha Spectrometry |
ASTM E 798 : 2016 | Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources |
ASTM C 1111 : 2010 : R2020 | Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM C 1295 : 2015 | Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution |
ASTM C 1854 : 2017 | Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O<inf>2</inf>) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement |
ASTM C 1554 : 2018 | Standard Guide for Materials Handling Equipment for Hot Cells |
ASTM C 1615/C1615M : 2017 | Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities |
ASTM C 1297 : 2018 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1855 : 2018 | Standard Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence |
ASTM C 1838 : 2016 : R2021 | Standard Practice for Cleaning for 1S and 2S Bottles |
ASTM C 1868 : 2018 | Standard Practice for Ceramographic Preparation of UO<inf>2</inf> and Mixed Oxide (U,Pu)O<inf>2</inf> Pellets for Microstructural Analysis |
ASTM C 1625 : 2019 | Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry |
ASTM C 1865 : 2018 | Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer |
ASTM C 967 : 2020 | Standard Specification for Uranium Ore Concentrate |
ASTM C 1205 : 2020 | Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry |
ASTM C 1771 : 2019 | Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction |
ASTM C 809 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum<brk/>Oxide-Boron Carbide Composite Pellets |
ASTM C 751 : 2020 | Standard Specification for Nuclear-Grade Boron Carbide Pellets |
ASTM E 321 : 2020 | Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
ASTM C 1752 : 2021 | Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges |
ASTM C 1703 : 2018 | Standard Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment |
ASTM C 1402 : 2017 | Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples |
ASTM C 1831/C1831M : 2017 | Standard Guide for Gamma Radiation Shielding Performance Testing |
ASTM D 7316 : 2014 | Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions (Withdrawn 2023) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.