ASTM D 1499 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
Hardcopy , PDF
08-07-2021
English
09-08-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 20
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers specific procedures and test conditions that are applicable for exposure of plastics in filtered open-flame carbon-arc devices conducted in accordance with Practices G151 and G152. This practice also covers the preparation of test specimens, the test condition suited for plastics, and the evaluation of test results.
1.2This practice does not cover enclosed carbon-arc exposures of plastics, which had been allowed in Practice D1499. Enclosed carbon-arc exposures of plastics are described in Practice D6360, and in G153, which gives requirements for exposing nonmetallic materials in enclosed carbon-arc devices.
1.3The values stated in SI units are to be regarded as standard. The values in parentheses are given for information only.
| ASTM A 975 : 2021 | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM D 4976 : 2012 : REV A : R2020 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
| ASTM F 790 : 2018 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 4313 : 2017 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable |
| ASTM D 6360 : 2015 | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM F 1665 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 2919/F2919M : 2012 : R2018 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup > [3871 mm<sup>2</sup>] in Panels |
| ASTM D 3105 : 2017 | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM F 1664 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence |
| ASTM D 4976 : 2012 : REV A | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
| ASTM D 4363 : 2017 | Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable |
| ASTM A 975 : 2011 : R2016 | Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM D 4000 : 2016 | Standard Classification System for Specifying Plastic Materials |
| ASTM G 178 : 2016 | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
| ASTM F 2453/F2453M : 2014 : R2019 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.<sup>2</sup> [3871 mm<sup>2</sup>] or Less, in Panels or Rolls, with Uniform Meshes |
| ASTM F 1043 : 2018 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 3000/F3000M : 2013 : R2018 | Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats |
| ASTM D 5870 : 2016 | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM A 974 : 1997 : R2016 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM F 668 : 2017 | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 6360 : 2007 | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D 5870 : 1995 | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 6360 : 2015 | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D 3980 : 1987 | Standard Practice for Interlaboratory Testing of Paint and Related Materials |
| ASTM D 5870 : 2011 | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 6360 : 1999 | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D 3980 : 1988 | Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998) |
| ASTM D 5870 : 2016 | Standard Practice for Calculating Property Retention Index of Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.