ASTM D 6382/D6382M : 1999 : R2022
|
Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM D 2196 : 2015
|
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
ASTM D 2240 : 2000
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 471 : 2016 : REV A
|
Standard Test Method for Rubber Property—Effect of Liquids |
ASTM D 1203 : 1994 : R1999 : EDT 1
|
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
ASTM D 2697 : 2003 : R2008
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 2137 : 2011 : R2018
|
Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics |
ASTM D 1004 : 2008
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 3278 : 2020
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 5869 : 2007 : REV A
|
Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 2136 : 2002 : R2007
|
Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
ASTM D 1475 : 2013
|
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2136 : 2019 : EDT 1
|
Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
ASTM D 1002 : 1999
|
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 2290 : 2016
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe |
ASTM D 1149 : 2016
|
Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
ASTM D 2697 : 2022
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 1922 : 2008
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 2137 : 1994 : R2000
|
Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
ASTM D 2136 : 2002 : R2012
|
Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
ASTM D 2196 : 2010
|
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
ASTM D 2290 : 2019 : REV A
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe |
ASTM D 1475 : 1998 : R2012
|
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 1204 : 2007
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 1653 : 1993 : R1999 : EDT 1
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 1824 : 1995
|
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
ASTM D 1709 : 2022
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 2697 : 2003
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM E 96/E96M : 2022 : REV A : EDT 1
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 1203 : 2023
|
Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods |
ASTM D 1709 : 2004
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 5869 : 2004
|
Standard Practice for Dark Oven Heat Exposure of Bituminous Materials |
ASTM D 1004 : 1994 : REV A
|
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
ASTM E 96/E96M : 2022 : REV A
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 1004 : 2009
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 228/D228M : 2021
|
Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing |
ASTM D 3111 : 1999
|
Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method |
ASTM D 1790 : 2002
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM D 1499 : 2013
|
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 2196 : 2005
|
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
ASTM D 3746/D3746M : 1985 : R2022
|
Standard Test Method for Impact Resistance of Bituminous Roofing Systems |
ASTM D 1790 : 2014
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM D 1204 : 2014
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 3111 : 2010 : R2018
|
Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method |
ASTM D 3389 : 2016
|
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM E 162 : 2021
|
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
ASTM E 96/E96M : 2021
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 1475 : 1985
|
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products |
ASTM G 154 : 2016
|
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
ASTM D 1203 : 2022
|
Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods |
ASTM D 1640/D1640M : 2014 : R2018
|
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings |
ASTM D 2369 : 1998
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1004 : 2013
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 3278 : 1996 : EDT 1
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 2291/D2291M : 2016
|
Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
ASTM D 1922 : 2015
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 7379/D7379M : 2008 : R2015 : EDT 1
|
Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive |
ASTM D 1922 : 2023
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 1922 : 2006 : REV A
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 7379/D7379M : 2008 : R2021
|
Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive |
ASTM D 1824 : 2016
|
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
ASTM D 1004 : 1994 : REV A : R2003
|
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
ASTM D 2136 : 1994 : R1998
|
Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
ASTM D 4799/D4799M : 2017 : R2023
|
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) |
ASTM D 1042 : 2006
|
Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM D 2240 : 2004
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1002 : 2010
|
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 3389 : 2021
|
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM D 3389 : 2010
|
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM D 4073 : 2006 : R2013
|
Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes |
ASTM D 3746/D3746M : 1985 : R2015 : EDT 1
|
Standard Test Method for Impact Resistance of Bituminous Roofing Systems |
ASTM D 1790 : 1999
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM E 96/E96M : 2022
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 6383/D6383M : 1999 : R2021
|
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
ASTM D 5635/D5635M : 2018
|
Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens |
ASTM D 93 : 2019
|
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
ASTM D 1149 : 2015
|
Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
ASTM D 1310 : 2014
|
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM D 1499 : 2013 : R2021
|
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 2291/D2291M : 2022
|
Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
ASTM D 5636/D5636M : 1994 : R2017
|
Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials |
ASTM D 2369 : 1981 : EDT 1
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1042 : 2022
|
Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
ASTM D 1204 : 2008
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 3389 : 2005
|
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM D 543 : 2021
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
ASTM D 5869 : 2007 : REV A : R2013
|
Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 412 : 2016 : EDT 1
|
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 2369 : 2001
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1042 : 1993
|
Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM D 1475 : 1998 : R2003
|
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
ASTM D 413 : 1998
|
Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate |
ASTM G 154 : 2023
|
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials |
ASTM D 1310 : 1986 : R1997 : EDT 1
|
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM D 1709 : 2015
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 2369 : 2010
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 5869 : 2004 : REV A
|
Standard Practice for Dark Oven Heat Exposure of Bituminous Materials |
ASTM D 1004 : 2003
|
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
ASTM D 2290 : 2004
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method |
ASTM D 93 : 1990 : EDT 1
|
Standard Test Methods for Flash Point by Pensky-Martens Closed Tester |
ASTM D 1149 : 2007
|
Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment |
ASTM D 6383/D6383M : 1999 : R2015
|
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
ASTM D 2697 : 2003 : R2014
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 3278 : 1982 : EDT 1
|
Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus |
ASTM D 3278 : 2021
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 3045 : 1992 : R1997
|
Standard Practice for Heat Aging of Plastics Without Load |
ASTM D 1204 : 2014 : R2020
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 2240 : 2004 : EDT 1
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1004 : 2007
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 3045 : 2018
|
Standard Practice for Heat Aging of Plastics Without Load |
ASTM D 1203 : 2016
|
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
ASTM D 2565 : 2023
|
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 1310 : 2001
|
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM D 2697 : 1986 : R1998
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 1002 : 2005
|
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 471 : 2016 : REV A : R2021
|
Standard Test Method for Rubber Property—Effect of Liquids |
ASTM D 2697 : 2003 : R2021
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 1922 : 2003
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 2136 : 2002 : EDT 1
|
Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
ASTM D 1709 : 2009
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 4073 : 1994 : R1998 : EDT 1
|
Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes |
ASTM D 1709 : 1998
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 1653 : 2013 : R2021
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 1042 : 2001 : REV A
|
Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM D 1203 : 2021
|
Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods |
ASTM D 4073 : 1994 : R2003
|
Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes |
ASTM D 2369 : 2020
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 7105 : 2006
|
Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems |
ASTM D 5636/D5636M : 1994 : R2022
|
Standard Test Method for Low-Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials |
ASTM D 1475 : 1960 : R1968
|
Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products |
ASTM D 2196 : 2018
|
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess |
ASTM D 1203 : 2010
|
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
ASTM D 2565 : 1992
|
Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus with and Without Water for Exposure of Plastics |
ASTM D 1709 : 2001
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 412 : 2016
|
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 1002 : 2010 : R2019
|
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 2137 : 2010
|
Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
ASTM G 155 : 2021
|
Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
ASTM D 1499 : 2005
|
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 816 : 2006 : R2023
|
Standard Test Methods for Rubber Cements |
ASTM E 96/E96M : 2016
|
Standard Test Methods for Water Vapor Transmission of Materials |
ASTM D 1042 : 2012 : R2017
|
Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
ASTM D 2369 : 2007
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1824 : 1966 : R1972
|
Standard Method Of Test For Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer |
ASTM D 3389 : 2015
|
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM D 1653 : 2003 : R2008
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 2290 : 2000
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method |
ASTM D 1149 : 2018
|
Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
ASTM D 5405/D5405M : 1998 : R2015
|
Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
ASTM D 2136 : 2002
|
Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
ASTM D 2565 : 1999
|
Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 1653 : 2003
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 1475 : 1998 : R2008
|
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2137 : 2005
|
Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
ASTM D 2369 : 2010 : EDT 1
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 638 : 2014
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 2240 : 2015 : R2021
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1824 : 1995 : R2010
|
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
ASTM D 5405/D5405M : 1998 : R2021
|
Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
ASTM D 1709 : 2016
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 5869 : 1995 : R2000 : EDT 1
|
Standard Practice for Dark Oven Heat Exposure of Bituminous Materials |
ASTM D 5602/D5602M : 2018 : R2022
|
Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens |
ASTM D 1239 : 2022
|
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
ASTM D 2369 : 1993
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 2240 : 2002
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1922 : 2015 : R2020
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 750 : 2012 : R2021
|
Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D 1310 : 2001 : R2007
|
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM D 543 : 2020
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
ASTM D 2565 : 1970
|
Standard Recommended Practice For Operating Xenon Arc-Type (Water-Cooled) Light - And Water-Exposure Apparatus For Exposure Of Plastics |
ASTM D 1239 : 2022 : REV A
|
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
ASTM D 2240 : 2015
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1149 : 2007 : R2012
|
Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
ASTM D 1709 : 2008
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 2523 : 2000 : R2006
|
Standard Practice for Testing Load-Strain Properties of Roofing Membranes |
ASTM D 1042 : 2001
|
Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM D 5869 : 2007
|
Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 1922 : 2003 : REV A
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 2240 : 2003
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1310 : 2014 : R2021
|
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM D 823 : 2018
|
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
ASTM D 2523 : 2000
|
Standard Practice for Testing Load-Strain Properties of Roofing Membranes |
ASTM D 1149 : 1978 : REV A
|
Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen) |
ASTM D 5683/D5683M : 1995 : R2017
|
Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes |
ASTM D 2240 : 2002 : REV B
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 93 : 2000
|
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester |
ASTM D 5683/D5683M : 1995 : R2022
|
Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes |
ASTM D 1204 : 1994 : EDT 1
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 3389 : 1994 : R1999
|
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
ASTM G 155 : 2013
|
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
ASTM D 1002 : 2001
|
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 2290 : 2000 : EDT 1
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method |
ASTM D 93 : 1985
|
Standard Test Method for Flash Point by Pensky-Martens Closed Tester |
ASTM D 750 : 2012 : R2017
|
Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D 1499 : 1999
|
Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics |
ASTM D 2565 : 2016
|
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 5602/D5602M : 2018
|
Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens |
ASTM D 570 : 2022
|
Standard Test Method for Water Absorption of Plastics |
ASTM D 4073 : 2006
|
Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes |
ASTM D 1790 : 2008
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM D 1790 : 2021
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM D 2240 : 2015 : EDT 1
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1203 : 1994 : R2003
|
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
ASTM D 5869 : 1995 : R2002
|
Standard Practice for Dark Oven Heat Exposure of Bituminous Materials |
ASTM D 2290 : 2019
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe |
ASTM D 1922 : 2005
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 412 : 2016 : R2021
|
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 1239 : 2007
|
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
ASTM D 3111 : 2010
|
Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method |
ASTM D 2369 : 1995
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 2523 : 2013
|
Standard Practice for Testing Load-Strain Properties of Roofing Membranes |
ASTM D 2369 : 2004
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1709 : 2016 : REV A : EDT 1
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 2290 : 2012
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe |
ASTM G 21 : 2015
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
ASTM D 4799/D4799M : 2017
|
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) |
ASTM D 2240 : 2005
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1653 : 2013
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 2369 : 1990
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1709 : 2003
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 2196 : 2018 : EDT 1
|
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
ASTM D 1922 : 2000 : REV A
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 1239 : 2014
|
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
ASTM D 1239 : 1998
|
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
ASTM D 1204 : 2002
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 1203 : 2020
|
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
ASTM D 2369 : 2003
|
Standard Test Method for Volatile Content of Coatings |
ASTM G 21 : 2015 : R2021 : EDT 1
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
ASTM D 2240 : 2005 : R2010
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 570 : 1998 : R2018
|
Standard Test Method for Water Absorption of Plastics |
ASTM D 1824 : 1995 : R2002
|
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
ASTM E 162 : 2016
|
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
ASTM D 1475 : 1998
|
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
ASTM D 2369 : 2010 : R2015 : EDT 1
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 3278 : 1996 : R2004 : EDT 1
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
ASTM D 2196 : 1999
|
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
ASTM D 2240 : 2002 : REV A
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 93 : 1997
|
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester |
ASTM D 823 : 2018 : R2022
|
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
ASTM D 2369 : 1987
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1640/D1640M : 2014 : R2022
|
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings |
ASTM D 228/D228M : 2019 : REV A
|
Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing |
ASTM D 1922 : 2006
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 816 : 2006 : R2016
|
Standard Test Methods for Rubber Cements |
ASTM D 2369 : 2001 : EDT 1
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 2290 : 2008
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method |
ASTM D 1709 : 2015 : REV A
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 1004 : 2021
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 3111 : 2019
|
Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test |
ASTM D 1922 : 2009
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 7105 : 2006 : R2013
|
Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems |
ASTM D 1042 : 2012
|
Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
ASTM D 1149 : 1999
|
Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber |
ASTM D 2369 : 1992
|
Standard Test Method for Volatile Content of Coatings |
ASTM D 1709 : 2016 : REV A
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM D 3278 : 1996 : R2011
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
ASTM D 93 : 2018
|
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
ASTM D 6382/D6382M : 1999 : R2017
|
Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM D 5635/D5635M : 2018 : R2022
|
Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens |
ASTM D 638 : 2022
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 2136 : 2019
|
Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
ASTM D 2137 : 2011
|
Standard Test Methods for Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics |
ASTM E 162 : 2022
|
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |