ASTM D 1566 : 2002 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Rubber
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
10-06-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 11
|
| DocumentType |
Reference Material
|
| Pages |
16
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included.
1.2 Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term.
1.3 Users of this standard who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to D5992 Standard Guide for Dynamic Testing of Rubber and Rubber-Like Materials Using Vibratory Methods and other standards listed under referenced documents. Selected terms from D5992 may be found in the Annex
1.4 Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons.
| ASTM F 2042 : 2018 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
| ASTM D 6244 : 2006 : R2018 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
| ASTM D 6338 : 2017 | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
| ASTM D 3853 : 2012 : R2017 | Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding |
| ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM F 2946 : 2012 : R2017 | Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
| ASTM D 5289 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM F 1494 : 2014 | Standard Terminology Relating to Protective Clothing |
| ASTM F 2038 : 2018 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials |
| ASTM F 477 : 2014 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM C 1115 : 2017 | Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
| ASTM F 913 : 2002 : R2014 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe |
| ASTM D 3771 : 2015 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM C 1523 : 2017 | Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
| ASTM C 1619 : 2019 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
| ASTM C 1478 : 2019 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
| ASTM D 7999 : 2015 | Standard Classification for Rubber Products in Natural Gas Pipeline Applications |
| ASTM D 5538 : 2013 : R2018 | Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations |
| ASTM C 1518 : 2016 | Standard Specification for Precured Elastomeric Silicone Joint Sealants |
| ASTM D 7216 : 2019 | Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
| ASTM D 6370 : 1999 : R2019 | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM C 864 : 2005 : R2019 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
| ASTM F 1859 : 2014 : EDT 1 | Standard Specification for Rubber Sheet Floor Covering Without Backing |
| ASTM D 5603 : 2019 : REV A | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber |
| ASTM F 1344 : 2015 | Standard Specification for Rubber Floor Tile |
| ASTM F 2523 : 2013 | Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers |
| ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 6085 : 1997 : R2016 | Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
| ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 6270 : 2017 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
| ASTM F 1860 : 2014 : EDT 1 | Standard Specification for Rubber Sheet Floor Covering With Backing |
| ASTM E 2203 : 2014 : R2018 | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
| ASTM F 2169 : 2015 : EDT 1 | Standard Specification for Resilient Stair Treads |
| ASTM D 3667 : 2016 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
| ASTM F 2510/F2510M : 2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes |
| ASTM F 1861 : 2016 | Standard Specification for Resilient Wall Base |
| ASTM C 1644 : 2006 : R2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
| ASTM D 4776/D4776M : 2018 | Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
| ASTM D 883 : 2019 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 8268 : 2019 | Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber |
| ASTM D 2632 : 2015 | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM D 3389 : 2016 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 6048 : 2007 : R2018 | Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers |
| ASTM F 3041 : 2014 : R2019 | Standard Specification for Bonded Rubber Crumb Floor Coverings |
| ASTM D 3393 : 1991 : R2014 | Standard Specification for Coated Fabrics—Waterproofness |
| ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
| ASTM A 1107/A1107M : 2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes |
| ASTM C 1478M : 2019 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) (Withdrawn 2020) |
| ASTM D 8015 : 2015 | Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments |
| ASTM D 8059 : 2016 | Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.