ASTM D 1654 : 2008 : R2016 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
Available format(s)
Hardcopy , PDF
Superseded date
20-09-2024
Superseded by
Language(s)
English
Published date
01-12-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.01, 2017 Outlines the treatment of previously coated or painted specimens for accelerated and atmospheric exposure tests and their subsequent evaluation regarding blistering associated with corrosion, corrosion, loss of adhesion at a scribe mark or other film failure.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| ProductNote |
Reconfirmed EDT 1
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the treatment of previously painted or coated specimens for accelerated and atmospheric exposure tests and their subsequent evaluation in respect to corrosion, blistering associated with corrosion, loss of adhesion at a scribe mark, or other film failure.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM A 1003/A1003M : 2015 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| ASTM A 1004/A1004M : 1999 : R2018 | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
| ASTM G 87 : 2002 : R2018 | Standard Practice for Conducting Moist SO<inf>2</inf> Tests |
| ASTM D 2803 : 2009 : R2015 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM F 2408 : 2016 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASTM D 6675 : 2001 : R2015 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM G 85 : 2011 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM F 2589 : 2016 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM D 870 : 2015 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM F 2957 : 2013 : R2019 : EDT 1 | Standard Specification for Ornamental Aluminum Fence Systems |
| ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM B 117 : 2018 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM C 647 : 2019 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 7376 : 2010 : REV A : R2016 | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM D 5894 : 2016 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 2247 : 2015 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM G 162 : 2018 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
| ASTM D 1735 : 2014 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM A 1003/A1003M : 2023 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| ASTM D 6577 : 2024 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM F 2408 : 2016 : R2023 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASTM D 6675 : 2023 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM F 1075 : 1997 : R2023 | Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained |
| ASTM G 162 : 2023 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
| ASTM D 4585/D4585M : 2018 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM F 2589 : 2016 : R2021 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM D 5367 : 2016 : R2021 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM A 755/A755M : 2018 : R2024 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM A 1113/A1113M : 2020 : EDT 1 | Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 7893 : 2013 : R2018 | Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
| ASTM D 3451 : 2024 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6695 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 870 : 2015 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 6695 : 2003 : REV A | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 1014 : 2009 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates (Withdrawn 2018) |
| ASTM G 87 : 2002 : R2023 | Standard Practice for Conducting Moist SO<inf>2</inf> Tests |
| ASTM D 2247 : 2010 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| ASTM D 2803 : 2003 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 1735 : 2021 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 5894 : 2005 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 4587 : 1991 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 1735 : 1999 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 6695 : 2003 : REV B | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2247 : 2011 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM D 5894 : 2021 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM E 3 : 2011 : R2017 | Standard Guide for Preparation of Metallographic Specimens |
| ASTM D 2247 : 2002 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| ASTM D 6695 : 2001 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2247 : 1992 | Standard Practice for Testing Water Reistence of Coatings in 100% Relative Humidity |
| ASTM D 4141 : 2007 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 6695 : 2008 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2247 : 2015 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 4585 : 1999 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 1735 : 2014 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 4587 : 2001 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| ASTM D 2803 : 2009 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 2247 : 2015 : REDLINE | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 5894 : 2010 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 4141 : 2001 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 822 : 2023 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 870 : 2015 : R2020 : EDT 1 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 5894 : 2016 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 1735 : 2014 : REDLINE | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 1735 : 2004 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 2247 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 4587 : 2011 : REDLINE | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 870 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 5894 : 2016 : REDLINE | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 4585 : 2007 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM G 85 : 1998 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM D 1735 : 2008 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 1014 : 1995 | Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel |
| ASTM D 7087 : 2005 : REV A : R2010 | Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments (Withdrawn 2019) |
| ASTM D 4587 : 2011 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 4587 : 2023 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM G 87 : 2002 | Standard Practice for Conducting Moist SO<sub>2</sub> Tests |
| ASTM D 6695 : 2003 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 7087 : 2005 | Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments |
| ASTM D 1014 : 2002 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 1735 : 2002 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 4587 : 2011 : R2019 : EDT 1 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 2247 : 2015 : R2020 : EDT 1 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 4141 : 1995 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 2803 : 2009 : R2015 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 2247 : 1968 : R1973 | Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity |
| ASTM D 2803 : 2009 : R2020 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 4587 : 2005 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 2247 : 1999 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| PIP ELSSG12:2024 | Design and Fabrication of Outdoor Enclosures for Motor Controllers and Switchgear |
| ASTM D 5894 : 1996 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 7087 : 2005 : REV A | Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments |
| ASTM D 6695 : 2024 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2803 : 1993 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal (Withdrawn 2002) |
| ASTM G 87 : 1998 | Standard Practice for Conducting Moist SO<sub>2</sub> Tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.