Skip to content
Please enter a keyword to search

  • ASTM D 2803 : 2009 : R2015

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    Available format(s): 

    Superseded date:  18-08-2020

    Language(s): 

    Published date:  01-06-2015

    Publisher:  American Society for Testing and Materials

    Sorry this product is not available in your region.

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 06.01, 2017 Defines three procedures for determining the susceptibility of organic-coated metal substrates to formation of filiform corrosion.

    Scope - (Show below) - (Hide below)

    1.1This guide covers three procedures for determining the susceptibility of organic-coated metal substrates to formation of filiform corrosion.

    1.2This guide is limited to the determination of whether filiform corrosion will occur between the organic coating and substrate.

    1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

    1.4This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    Note 1:Procedure B of this standard is equivalent to ISO 4623.

    General Product Information - (Show below) - (Hide below)

    Committee D 01
    Document Type Guide
    Product Note Reconfirmed 2015
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 3794 : 2018 Standard Guide for Testing Coil Coatings
    ASTM D 1654 : 2008 : R2016 : EDT 1 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    ASTM D 3322 : 1982 : R2017 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
    ASTM D 6577 : 2015 Standard Guide for Testing Industrial Protective Coatings
    ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
    ASTM D 6577 : 2015 : R2019 Standard Guide for Testing Industrial Protective Coatings

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1005 : 1995 : R2020 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
    ASTM D 1730 : 2009 : R2014 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
    ASTM D 1730 : 2003 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
    ASTM D 823 : 1995 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
    ISO 4623-2:2016 Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates
    ASTM D 609 : 2017 : REDLINE Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
    ASTM D 1730 : 2009 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
    ASTM D 1654 : 2005 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    ASTM D 1005 : 1995 : R2001 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
    ASTM D 1730 : 1967 : R1998 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
    ISO 4623-1:2000 Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates
    ISO 4628-10:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
    ASTM D 1005 : 1995 : R2013 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
    ASTM D 7091 : 2013 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    ASTM D 1730 : 2009 : R2020 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
    ASTM D 1654 : 2008 : R2016 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    ASTM D 7091 : 2013 : REDLINE Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    ASTM D 1654 : 1992 : R2000 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    ASTM D 7091 : 2012 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    ASTM E 104 : 2002 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
    ASTM D 7091 : 2005 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    ASTM D 1005 : 1995 : R2007 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
    ASTM D 1654 : 2008 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    ASTM D 1654 : 2008 : R2016 : EDT 1 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    ASTM D 1005 : 1995 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective