ASTM D 1777 : 1996 : R2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Thickness of Textile Materials
Hardcopy , PDF
11-11-2014
English
01-01-2007
CONTAINED IN VOL. 07.01, 2015 Defines the measurement of the thickness of most textile materials.
Committee |
D 13
|
DocumentType |
Test Method
|
Pages |
5
|
ProductNote |
Reconfirmed 2007
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This test method covers the measurement of the thickness of most textile materials.
1.2 This test method applies to most fabrics including woven fabrics, air bag fabrics, blankets, napped fabrics, knitted fabrics, layered fabrics, and pile fabrics. The fabrics may be untreated, heavily sized, coated, resin-treated, or otherwise treated. Instructions are provided for testing thickness, except as provided for in another standard such as listed in Section .
1.3 The values stated in SI units are to be regarded as the standard. The values stated in inch-pound may be approximate.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F 1671/F1671M : 2013 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
ASTM D 7001 : 2006 : R2011 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
ASTM D 580/D580M : 2015 | Standard Specification for Greige Woven Glass Tapes and Webbings |
ASTM D 204 : 2002 : R2016 | Standard Test Methods for Sewing Threads |
ASTM D 1571/D1571M : 1995 : R2017 | Standard Specification for Woven Asbestos Cloth (Withdrawn 2022) |
ASTM D 628/D628M : 1995 : R2017 | Standard Specification for Asbestos Tubular Sleeving (Withdrawn 2022) |
ASTM F 1819 : 2019 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
ASTM F 1939 : 2015 | Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating |
ASTM F 1138 : 1998 : R2014 | Standard Specification for Spray Shields for Mechanical Joints |
ASTM D 5726 : 1998 : R2013 | Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
ASTM D 885/D885M : 2010 : REV A : R2014 : EDT 1 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023) |
ASTM F 1670/F1670M : 2017 : REV A | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
ASTM F 2097 : 2016 | Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 | Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
ASTM F 739 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact |
ASTM F 1383 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
ASTM D 6337 : 1998 : R2013 | Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
ASTM F 2700 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating |
ASTM F 2878 : 2019 | Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture |
ASTM F 2702 : 2015 | Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction (Withdrawn 2020) |
ASTM D 4884/D4884M : 2014 : REV A | Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
ASTM F 2731 : 2018 | Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems |
ASTM F 2299/F2299M : 2003 : R2017 | Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres |
ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 4029/D4029M : 2016 | Standard Specification for Finished Woven Glass Fabrics |
ASTM D 5977 : 2015 | Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures |
ASTM F 2703 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction |
ASTM D 579/D579M : 2015 | Standard Specification for Greige Woven Glass Fabrics |
ASTM D 315/D315M : 1995 : R2017 | Standard Specification for Woven Asbestos Tape (Withdrawn 2022) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.