ASTM D 1781 : 1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Climbing Drum Peel for Adhesives
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
10-05-1998
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.06, 2015 Defines the determination of the peel resistance of adhesive bonds between: a relatively flexible adherend and a rigid adherend; and the relatively flexible facing of a sandwich structure and its core, when tested under specified conditions.
| Committee |
D 14
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method covers the determination of the peel resistance of adhesive bonds between: a relatively flexible adherend and a rigid adherend; and the relatively flexible facing of a sandwich structure and its core, when tested under specified conditions.
1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use .
| MIL-A-85705 Revision A:1987 | ADHESIVE, AIRCRAFT, FOR STRUCTURAL REPAIR |
| SAE AMS 3695 : 2014 | ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| ASTM C 481 : 1999 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
| ASTM D 6465 : 1999 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM C 481 : 1999 : R2005 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM C 481 : 1999 : R2011 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM D 1995 : 1992 : R1998 : EDT 1 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 6465 : 1999 : R2005 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| DEFSTAN 00-970(PT1)SEC4/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4 - DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4 - DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT7)SEC2/SUPP4/5(2015) : INTERIM | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 4: DESIGN AND CONSTRUCTION (SUBPART D) |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| DEFSTAN 00-970(PT7)SEC4/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 4: DETAIL DESIGN AND STRENGTH OF MATERIALS |
| DEFSTAN 00-970(PT1)SEC4/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT7)SEC4/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 4: DETAIL DESIGN AND STRENGTH OF MATERIALS |
| DEFSTAN 00-970(PT1)SEC4/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/4(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT A/C - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FORD SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT1)SEC4/13(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| ASTM E 874 : 2011 : REDLINE | PRACTICE FOR ADHESIVE BONDING OF ALUMINUM FACINGS TO NONMETALLIC HONEYCOMB CORE FOR SHELTER PANELS |
| GG-S-161 Revision D:1985 | SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION) |
| SAE AS8056 | Minimum Design and Performance of Airplane Galley In-Flight Carts, Containers, and Associated Components |
| ASTM D 3167 : 2010 | Standard Test Method for Floating Roller Peel Resistance of Adhesives |
| ASTM D 1995 : 1992 : R2004 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| MIL-HDBK-349 Base Document:1994 | MANUFACTURE AND INSPECTION OF ADHESIVE BONDED, ALUMINUM HONEYCOMB SANDWICH ASSEMBLIES FOR AIRCRAFT |
| ASTM D 3167 : 2010 : R2017 | Standard Test Method for Floating Roller Peel Resistance of Adhesives |
| DEFSTAN 00-970(PT1)SEC4/14(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 4: DESIGN AND CONSTRUCTION |
| DEFSTAN 00-970(PT7)SEC2/SUPP4/6(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 4: DESIGN AND CONSTRUCTION (SUBPART D) |
| MIL-A-25463 Revision B:1982 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL-STD-401 Revision B:1967 | SANDWICH CONSTRUCTIONS AND CORE MATERIALS, GENERAL TEST METHODS |
| ASTM D 1995 : 1992 : R2011 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM C 481 : 1999 : R2016 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM E 865 : 2012 : REDLINE | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| SAE AIR6291 | Guidelines for Repair Process Evaluation of Aluminum Bonded Structure |
| ASTM D 1995 : 1992 : R2017 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| SAE AMS A 25463 : 2013 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| ASTM E 1555 : 2012 : REDLINE | Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
| MIL-C-37722 Base Document:1978 | COVER, SURGICAL INSTRUMENT AND DRESSING CABINET |
| ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 6465 : 1999 : R2012 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM E 865 : 2012 | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| ASTM E 1555 : 2012 | Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM E 2004 : 2018 | Standard Test Method for Facing Cleavage of Sandwich Panels |
| ASME RTP 1 : 2015 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
| ASME RTP-1 : 2017 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.