ASTM D 2216 : 1971
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Method of Laboratory Determination Of Moisture Content Of Soil
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
30-11-0002
Committee |
D 18
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
ASTM F 1815 : 2011 : R2018 | Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones |
ASTM D 7263 : 2009 : R2018 : EDT 2 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
ASTM D 5312/D5312M : 2012 : R2013 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
ASTM D 1140 : 2017 | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
ASTM G 158 : 1998 : R2016 | Standard Guide for Three Methods of Assessing Buried Steel Tanks |
ASTM D 854 : 2014 | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
ASTM D 2974 : 2014 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
ASTM D 3080/D3080M : 2011 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020) |
ASTM D 3987 : 2012 | Standard Practice for Shake Extraction of Solid Waste with Water |
ASTM D 5856 : 2015 | Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024) |
ASTM D 1556/D1556M : 2015 : EDT 1 | Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024) |
ASTM E 2060 : 2006 : R2014 | Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |
ASTM E 2243 : 2013 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
ASTM D 3551 : 2017 | Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer |
ASTM D 4612 : 2016 | Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil |
ASTM D 4643 : 2017 | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
ASTM D 7277 : 2016 | Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
ASTM D 2166/D2166M : 2016 | Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
ASTM D 6031/D6031M : 1996 : R2015 | Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes |
ASTM D 2937 : 2017 : EDT 2 | Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method |
ASTM D 7759/D7759M : 2014 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
ASTM E 1689 : 1995 : R2014 | Standard Guide for Developing Conceptual Site Models for Contaminated Sites |
ASTM D 5195 : 2014 | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
ASTM D 7891 : 2015 | Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell |
ASTM D 5335 : 2014 | Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
ASTM D 4874 : 1995 : R2014 | Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021) |
ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM D 5731 : 2016 | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
ASTM D 6128 : 2016 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
ASTM D 6780/D6780M : 2012 | Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
ASTM D 1883 : 2016 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
ASTM E 3163 : 2018 | Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action |
ASTM D 425 : 2017 | Standard Test Method for Centrifuge Moisture Equivalent of Soils (Withdrawn 2024) |
ASTM D 6683 : 2019 | Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress |
ASTM D 6913/D6913M : 2017 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM F 1668 : 2016 | Standard Guide for Construction Procedures for Buried Plastic Pipe |
ASTM D 4546 : 2014 : EDT 1 | Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
ASTM D 6836 : 2016 | Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
ASTM D 7243 : 2011 | Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
ASTM D 5874 : 2016 | Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
ASTM D 4253 : 2016 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
ASTM D 2487 : 2017 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
ASTM D 7758 : 2017 | Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
ASTM E 1868 : 2010 : R2015 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
ASTM D 5887/D5887M : 2016 | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
ASTM D 3550/D3550M : 2017 | Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
ASTM D 7830/D7830M : 2014 | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
ASTM D 6035/D6035M : 2013 | Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter |
ASTM D 5080 : 2017 | Standard Test Method for Rapid Determination of Percent Compaction |
ASTM D 5873 : 2014 | Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023) |
ASTM D 5084 : 2016 : REV A | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
ASTM D 1586/D1586M : 2018 | Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils |
ASTM D 6766 : 2018 | Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
ASTM D 7294 : 2013 | Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest |
ASTM E 2278 : 2013 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
ASTM D 559/D559M : 2015 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
ASTM D 4914/D4914M : 2016 | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
ASTM E 2399/E2399M : 2019 | Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems |
ASTM D 1634 : 2017 | Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
ASTM D 6539 : 2013 | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022) |
ASTM D 4718/D4718M : 2015 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
ASTM D 5334 : 2014 | Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
ASTM D 7012 : 2014 : EDT 1 | Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
ASTM D 6758 : 2018 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
ASTM D 7876 : 2013 : R2018 | Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants |
ASTM D 7481 : 2018 | Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder |
ASTM D 6938 : 2017 : REV A | Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) |
ASTM D 6393 : 2014 | Standard Test Method for Bulk Solids Characterization by Carr Indices |
ASTM D 8204 : 2018 | Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners |
ASTM D 5311/D5311M : 2013 | Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022) |
ASTM D 698 : 2012 : EDT 2 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
ASTM D 4221 : 2018 | Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
ASTM D 8152 : 2018 | Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test |
ASTM D 2850 : 2015 | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
ASTM D 4944 : 2018 | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 3999/D3999M : 2011 : EDT 1 | Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020) |
ASTM D 5220 : 2014 | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
ASTM D 4646 : 2016 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM D 7100 : 2011 | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
ASTM D 2435/D2435M : 2011 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
ASTM D 7608 : 2018 | Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils |
ASTM D 4015 : 2015 : EDT 1 | Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices |
ASTM D 7698 : 2011 : REV A | Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
ASTM D 4554 : 2012 | Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021) |
ASTM D 560/D560M : 2016 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
ASTM D 5240/D5240M : 2012 : R2013 : EDT 1 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate |
ASTM D 5298 : 2016 | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
ASTM D 5918 : 2013 : EDT 1 | Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022) |
ASTM D 6773 : 2016 | Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester |
ASTM D 6940 : 2018 | Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids |
ASTM D 4644 : 2016 | Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
ASTM D 4648/D4648M : 2016 | Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil |
ASTM D 558 : 2011 | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
ASTM D 5030/D5030M : 2013 : REV A | Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
ASTM D 4843 : 1988 : R2016 | Standard Test Method for Wetting and Drying Test of Solid Wastes |
ASTM D 6572 : 2013 : EDT 2 | Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
ASTM D 7181 : 2011 | Method for Consolidated Drained Triaxial Compression Test for Soils |
ASTM D 4829 : 2011 | Standard Test Method for Expansion Index of Soils |
ASTM C 1733 : 2017 : REV A | Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method |
ASTM D 7928 : 2017 | Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
ASTM D 3967 : 2016 | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
ASTM D 7380 : 2015 | Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer |
ASTM E 2993 : 2016 | Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone |
ASTM E 2277 : 2014 | Standard Guide for Design and Construction of Coal Ash Structural Fills |
ASTM D 5550 : 2014 | Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
ASTM D 4223/D4223M : 2012 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
ASTM D 3839 : 2014 | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
ASTM D 8121/D8121M : 2019 | Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device |
ASTM D 4767 : 2011 | Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
ASTM D 6528 : 2017 | Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
ASTM D 5607 : 2016 | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
ASTM D 4254 : 2016 | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
ASTM D 6276 : 2019 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 6066 : 2011 | Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Withdrawn 2020) |
ASTM D 6467 : 2013 : EDT 1 | Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils |
ASTM D 4186/D4186M : 2012 : EDT 1 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
ASTM D 4535 : 2013 : EDT 2 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
ASTM D 5982 : 2015 | Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Withdrawn 2024) |
ASTM D 7070 : 2016 | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
ASTM E 1109 : 2019 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
ASTM D 2167 : 2015 | Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024) |
ASTM D 8167/D8167M : 2018 : REV A | Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) |
ASTM D 7743 : 2012 | Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders |
ASTM D 4793 : 2009 : R2017 | Standard Test Method for Sequential Batch Extraction of Waste with Water |
ASTM D 4647/D4647M : 2013 | Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
ASTM D 8012 : 2018 | Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications |
ASTM D 7765 : 2018 : REV A | Standard Practice for Use of Foundry Sand in Structural Fill and Embankments |
ASTM D 4959 : 2016 | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
ASTM D 4318 : 2017 : EDT 1 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
ASTM D 6941 : 2019 | Standard Practice for Measuring Fluidization Segregation Tendencies of Powders |
ASTM E 1197 : 2012 | Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test |
ASTM D 2321 : 2018 | Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications |
ASTM D 7664 : 2010 : R2018 : EDT 1 | Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils |
ASTM D 7503 : 2018 | Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
ASTM D 7663 : 2012 : R2018 : EDT 1 | Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations |
ASTM D 3385 : 2018 | Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer |
ASTM D 5313/D5313M : 2012 : R2013 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.