ASTM D 2510 : 1994 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Adhesion of Solid Film Lubricants
Hardcopy , PDF
10-01-2023
English
08-11-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 05.01, 2017 Defines the measurement of the adhesion characteristics of dry solid film lubricants.
| Committee |
D 02
|
| DocumentType |
Test Method
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method2 covers the measurement of the adhesion characteristics of dry solid film lubricants.
1.2The values stated in SI units are to be regarded as standard.
1.2.1Exception—The values given in parentheses are provided for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7217 : 2022 | Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 2511 : 2020 | Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants |
| ASTM D 2511 : 1993 : R2019 | Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants |
| ASTM D 7217 : 2016 | Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 1730 : 2009 : R2014 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1730 : 2003 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM B 209M : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) (Withdrawn 2021) |
| ASTM D 3330/D3330M : 2002 : EDT 1 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 1000 : 2017 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 1730 : 2009 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM B 209M : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) |
| ASTM F 22 : 2013 | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| ASTM F 22 : 2013 : REDLINE | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| ASTM D 1730 : 1967 : R1998 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 1000 : 2004 : EDT 1 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1000 : 2010 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 1730 : 2009 : R2020 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1000 : 2009 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM F 22 : 2021 | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM F 22 : 2013 : R2021 | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 3330/D3330M : 2004 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1000 : 1999 | Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1000 : 2004 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1000 : 2017 : REDLINE | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.