ASTM D 3183 : 2010 : R2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
Available format(s)
Hardcopy , PDF
Superseded date
06-12-2024
Superseded by
Language(s)
English
Published date
01-11-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 11
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers methods for the preparation of pieces of a rubber vulcanizate that is not in the form of sheet. Such pieces are used as a source from which specimens are obtained for testing.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 572 : 2004 : R2019 | Standard Test Method for Rubber—Deterioration by Heat and Oxygen |
| ASTM D 430 : 2006 : R2018 | Standard Test Methods for Rubber Deterioration—Dynamic Fatigue |
| ASTM D 454 : 2004 : R2019 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
| ASTM D 925 : 2014 : R2019 | Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) |
| ASTM D 575 : 1991 : R2018 | Standard Test Methods for Rubber Properties in Compression |
| ASTM D 865 : 2011 : R2018 | Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 395 : 2018 | Standard Test Methods for Rubber Property—Compression Set |
| ASTM D 2632 : 2015 : R2019 | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM E 1783/E1783M : 1996 : R2017 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 573 : 2004 : R2019 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM D 4289 : 2019 | Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
| ASTM D 3032 : 2016 | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 6284 : 2017 | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
| ASTM C 1187 : 2015 | Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment |
| ASTM D 2628 : 1991 : R2016 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
| ASTM D 624 : 2000 : R2012 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 1460 : 1986 : R2014 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 413 : 1998 : R2017 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
| ASTM D 2000 : 2018 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 6515 : 2000 : R2016 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 378 : 2010 : R2016 | Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
| ASTM D 1056 : 2014 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
| ASTM D 1456 : 1986 : R2014 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 7121 : 2005 : R2018 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
| ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM F 1909 : 1998 : R2012 | Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets |
| ASTM D 1052 : 2009 : R2019 | Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus |
| ASTM E 1612/E1612M : 1994 : R2017 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 3004 : 2008 : R2013 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials |
| ASTM D 3667 : 2016 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM D 1148 : 2013 : R2018 | Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces |
| ASTM D 380 : 1994 : R2019 | Standard Test Methods for Rubber Hose |
| ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 4014 : 2003 : R2018 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 1330 : 2004 : R2015 : EDT 1 | Standard Specification for Rubber Sheet Gaskets |
| ASTM D 750 : 2012 : R2017 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM D 3771 : 2015 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM D 3767 : 2003 : R2014 | Standard Practice for Rubber—Measurement of Dimensions |
| ASTM G 74 : 2013 | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| ASTM D 378 : 2024 | Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
| ASTM F 1909 : 1998 : R2020 | Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets |
| ASTM D 6515 : 2000 : R2023 : EDT 1 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM E 1783/E1783M : 2024 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 3771 : 2015 : R2022 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM C 1187 : 2020 : REV A | Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment |
| ASTM D 8363 : 2020 | Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions |
| ASTM D 624 : 2000 : R2020 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 575 : 1991 : R2024 | Standard Test Methods for Rubber Properties in Compression |
| ASTM D 3032 : 2021 : REV A | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 3767 : 2003 : R2020 | Standard Practice for Rubber—Measurement of Dimensions |
| ASTM D 4014 : 2023 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 1056 : 2020 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
| ASTM D 1330 : 2004 : R2022 | Standard Specification for Rubber Sheet Gaskets |
| ASTM D 4289 : 2024 : REV A | Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
| ASTM D 1460 : 1986 : R2020 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 380 : 1994 : R2020 | Standard Test Methods for Rubber Hose |
| ASTM D 750 : 2012 : R2021 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM D 572 : 2023 | Standard Test Method for Rubber—Deterioration by Heat and Oxygen |
| ASTM D 3667 : 2016 : R2022 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 1456 : 1986 : R2020 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 6284 : 2017 : R2023 | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
| ASTM G 74 : 2013 : R2021 | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| NFPA 1960:2024 | Standard for Fire Hose Connections, Spray Nozzles, Manufacturer’s Design of Fire Department Ground Ladders, Fire Hose, and Powered Rescue Tools |
| ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 3903 : 2015 : R2022 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM D 7121 : 2005 : R2024 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
| ASTM D 3832 : 1979 : R2022 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM E 1612/E1612M : 1994 : R2022 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 3004 : 2008 : R2020 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials |
| ASTM D 3182 : 1989 : R2001 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3182 : 2021 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3182 : 2021 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.