ASTM D 3389 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
Hardcopy , PDF
05-06-2021
English
03-11-2016
This test method covers the determination of the wear resistance of fabrics coated with rubber or plastics to abrasion.
Committee |
D 11
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the determination of the wear resistance of fabrics coated with rubber or plastics to abrasion. The abrasion is measured by mass loss or number of cycles required to wear through the coating to initially expose the base fabric.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM C 1695 : 2019 | Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service |
ASTM F 2051 : 2000 : R2014 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
ASTM F 1344 : 2015 | Standard Specification for Rubber Floor Tile |
ASTM F 1296 : 2008 : R2015 | Standard Guide for Evaluating Chemical Protective Clothing |
ASTM D 3489 : 2017 | Standard Test Methods for Microcellular Urethane Materials |
ASTM F 1138 : 1998 : R2014 | Standard Specification for Spray Shields for Mechanical Joints |
ASTM D 6754/D6754M : 2015 | Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
ASTM D 3105 : 2017 | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
ASTM F 3041 : 2014 : R2019 | Standard Specification for Bonded Rubber Crumb Floor Coverings |
ASTM G 195 : 2018 | Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser |
ASTM D 6434 : 2012 : R2018 | Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes |
ASTM C 1695 : 2020 | Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service |
ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 1349 : 2014 : R2019 | Standard Practice for Rubber—Standard Conditions for Testing |
ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
ASTM D 1349 : 1999 | Standard Practice for Rubber-Standard Temperatures For Testing |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
ASTM D 1349 : 2009 | Standard Practice for Rubber-Standard Temperatures for Testing |
ASTM D 1349 : 2014 | Standard Practice for Rubber—Standard Conditions for Testing |
ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
ASTM D 1349 : 2007 | Standard Practice for Rubber-Standard Temperatures for Testing |
ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.