ASTM D 350 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
Hardcopy , PDF
09-02-2021
English
10-12-2013
These test methods cover procedures for testing electrical insulating sleeving comprising a flexible tubular product made from a woven textile fibre base, such as cotton, rayon, nylon, or glass, thereafter impregnated, or coated, or impregnated and coated, with a suitable dielectric material.
Committee |
D 09
|
DocumentType |
Test Method
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1These test methods cover procedures for testing electrical insulating sleeving comprising a flexible tubular product made from a woven textile fibre base, such as cotton, rayon, nylon, or glass, thereafter impregnated, or coated, or impregnated and coated, with a suitable dielectric material.
1.2The procedures appear in the following sections:
Procedures | Sections |
Brittleness Temperature | 18 to 21 |
Compatibility of Sleeving with Magnet Wire Insulation | 45 to 59 |
Conditioning | 6 |
Dielectric Breakdown Voltage | 12 to 17 |
Dielectric Breakdown Voltage After Short-Time Aging | 29 to 33 |
Dimensions | 7 to 11 |
Effect of Push-Back After Heat Aging | 73 to 78 |
Flammability | 22 to 28 |
Hydrolytic Stability | 66 to 72 |
Oil Resistance | 34 to 37 |
Selection of Test Material | 5 |
Solvent Resistance | 60 to 65 |
Thermal Endurance | 38 to 44 |
1.3The values stated in inch-pound units, except for °C, are to be regarded as the standard. The values in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This is a fire-test-response standard. See Sections 22 through 28, which are the procedures for flammability tests.
1.5This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products or assemblies under actual fire conditions.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 45.2 and 63.1.1.
1.7Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
ASTM D 8355 : 2020 | Standard Test Methods for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing |
ASTM D 2307 : 2007 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
ASTM D 5423 : 1993 : R2005 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation (Withdrawn 2014) |
ASTM D 3636 : 2000 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 1711 : 2002 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3487 : 2016 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 2307 : 2005 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
ASTM D 2307 : 1995 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
ASTM D 1711 : 2011 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3636 : 2013 : REV A : EDT 1 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 1711 : 2011 : REV A | Standard Terminology Relating to Electrical Insulation |
ASTM D 6054 : 1997 | Standard Practice for Conditioning Electrical Insulating Materials for Testing |
ASTM D 1711 : 2013 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3487 : 2000 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 3636 : 2006 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 1711 : 1999 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3636 : 2019 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 3636 : 2013 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 1711 : 2014 : REV A | Standard Terminology Relating to Electrical Insulation |
ASTM D 3487 : 2008 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 1711 : 2015 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3487 : 2009 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 1711 : 2014 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3487 : 2000 : R2006 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 3636 : 2013 : REV A | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 3487 : 1988 : R1993 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 3487 : 2016 : EDT 1 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
ASTM D 1711 : 2020 | Standard Terminology Relating to Electrical Insulation |
ASTM D 3636 : 2011 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 1711 : 2008 | Standard Terminology Relating to Electrical Insulation |
ASTM D 5423 : 1993 : R1999 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
ASTM D 2307 : 2001 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
ASTM D 5423 : 2014 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.