• Shopping Cart
    There are no items in your cart

ASTM D 3568 : 2003 : R2018

Current

Current

The latest, up-to-date edition.

Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-08-2018

€49.35
Excluding VAT

CONTAINED IN VOL. 09.01, 2015 Defines the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM).

Committee
D 11
DocumentType
Test Method
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
SupersededBy
Supersedes

1.1These test methods specify the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM).

1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

14/30255646 DC : 0 BS ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE
BS ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure
06/30150431 DC : DRAFT MAY 2006 ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE
ASTM D 6047 : 2017 : R2021 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D 3900 : 2017 : R2021 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 6047 : 2017 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D 3900 : 2017 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3900 : 2017 : REDLINE Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 6047 : 2017 : REDLINE Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

ASTM D 1646 : 2000 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2161 : 2005 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 3182 : 2015 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2161 : 2019 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2084 : 1995 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 1646 : 2004 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2084 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 3900 : 2017 : REDLINE Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 2501 : 1991 : R2000 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2161 : 2010 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 3900 : 2005 : REV A Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3896 : 2007 : R2021 Standard Practice for Rubber From Synthetic Sources—Sampling
ASTM D 1646 : 1981 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
ASTM D 5289 : 2006 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 6204 : 2004 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2161 : 1982 Standard Method for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 3182 : 2007 : R2012 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2501 : 2014-07 TEST METHOD FOR CALCULATION OF VISCOSITY-GRAVITY CONSTANT (VGC) OF PETROLEUM OILS
ASTM D 4483 : 1999 Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM D 4483 : 2020 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 2084 : 2006 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 5289 : 2007 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 5289 : 2017 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 2161 : 2010 : EDT 1 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 5289 : 2007 : REV A Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D 4483 : 2005 : REV A Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3900 : 2017 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3182 : 1989 : R2006 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1646 : 2019 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1646 : 2019 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 5289 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 3900 : 2015 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 5289 : 2019 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 2084 : 2017 : REDLINE TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER
ASTM D 3900 : 1995 : R2000 Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
ASTM D 2084 : 2011 : R2016 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 3182 : 1989 : R2001 : EDT 1 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 3900 : 2005 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3896 : 2007 : R2011 Standard Practice for Rubber From Synthetic Sources—Sampling
ASTM D 1646 : 2003 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3896 : 1985 : R2001 Standard Practice for Rubber From Synthetic Sources-Sampling
ASTM D 2501 : 2011 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 1646 : 2015 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 6204 : 2019 : REV A Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2084 : 2007 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 1646 : 2003 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 5289 : 2017 : REDLINE TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS
ASTM D 3896 : 2007 : R2016 Standard Practice for Rubber From Synthetic Sources—Sampling
ASTM D 2501 : 1991 : R2005 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2084 : 2001 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D 5289 : 1995 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 5289 : 2012 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 6204 : 2019 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2501 : 2014 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 3900 : 2017 : R2021 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3182 : 2007 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3900 : 1995 : R2004 : EDT 1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3182 : 2016 : REDLINE Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1646 : 2006 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2084 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 6204 : 2001 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 1646 : 2007 : R2012 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3896 : 2007 Standard Practice for Rubber From Synthetic Sources—Sampling
ASTM D 6204 : 2005 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 4483 : 2005 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 2161 : 2020 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2161 : 1993 : R1999 : EDT 2 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 6204 : 2007 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 1646 : 2007 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 1646 : 2017 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 3900 : 2005 : REV A : R2010 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D 3182 : 1989 : R2001 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2084 : 2011 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 4483 : 2014 : REV A Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 4483 : 2014 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 2161 : 2010 : R2016 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2161 : 1966 Standard Method Of Test For Conversion Of Kinematic Viscosity To Saybolt Universal Viscosity Or To Saybolt Furol Viscosity
ASTM D 3182 : 2021 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 6204 : 2012 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 4483 : 2018 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2005 : REV A : R2011 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 3182 : 1989 : R1994 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1646 : 1992 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
ASTM D 4483 : 2014-02 PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
ASTM D 3182 : 2016 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2161 : 2004 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 3896 : 1985 : R1995 : EDT 1 Standard Practice for Rubber From Synthetic Sources-Sampling
ASTM D 2501 : 2014 : R2019 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 3182 : 2021 : REV A Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2161 : 2017 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 6204 : 1999 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2161 : 2005 : EDT 1 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM D 2084 : 2017 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D 3182 : 2015 : REV A Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 6204 : 2015 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.