Skip to content
Please enter a keyword to search

  • ASTM D 387 : 2000 : R2017

    Current The latest, up-to-date edition.

    Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  24-03-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 06.01, 2017 Describes color and strength of a pigment under test with a reference standard of the same type and grade.

    Scope - (Show below) - (Hide below)

    1.1This test method is intended to be used to compare the color and strength of a pigment under test with a reference standard of the same type and grade.

    1.2This test method does not apply to white pigments.

    Note 1:Test Method D3022 is similar to this test method, but it utilizes a miniature sandmill rather than a mechanical muller, to disperse the chromatic pigment.

    Note 2:Test Method D332 and Test Method D2745 are similar to this test method, but they are intended for use with white pigments, rather than chromatic pigments.

    1.3The values stated in SI units are the preferred unit of measurement. The values given in parentheses are for information only.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8.

    General Product Information - (Show below) - (Hide below)

    Committee D 01
    Document Type Test Method
    Product Note Reconfirmed 2017
    Publisher American Society for Testing and Materials
    Status Current
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 85 : 2005 : R2023 Standard Specification for Ochre Pigment
    ASTM D 1844 : 1986 : R2020 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
    ASTM D 210 : 2005 : R2023 Standard Specification for Bone Black Pigment
    ASTM D 2218 : 1967 : R2019 Standard Specification for Molybdate Orange Pigments
    ASTM D 763 : 2006 : R2019 Standard Specification for Raw and Burnt Umber Pigments
    ASTM D 6336 : 2011 : R2021 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
    ASTM D 2066 : 2007 : R2020 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
    ASTM D 1649 : 2001(R2019) Standard Specification for Strontium Chromate Pigment
    ASTM D 1845 : 1986 : R2020 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
    ASTM D 4302 : 2014 : R2021 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints
    ASTM D 769 : 2001 : R2019 Standard Specification for Black Synthetic Iron Oxide
    ASTM D 3721 : 2005 : R2019 Standard Specification for Synthetic Red Iron Oxide Pigment
    ASTM D 5098 : 2016 : R2021 Standard Specification for Artists' Acrylic Dispersion Paints
    ASTM D 209 : 1981 : R2023 Standard Specification for Lampblack Pigment
    ASTM D 3724 : 2001(R2019) Standard Specification for Synthetic Brown Iron Oxide Pigment
    ASTM D 211 : 1967 : R2023 Standard Specification for Chrome Yellow and Chrome Orange Pigments
    ASTM D 765 : 1987 : R2020 Standard Specification for Raw and Burnt Sienna Pigments
    ASTM D 561 : 1982 : R2020 Standard Specification for Carbon Black Pigment for Paint
    ASTM D 478 : 2002 : R2019 Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
    ASTM D 3021 : 2001 : R2019 Standard Specification for Phthalocyanine Green Pigments

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 2745 : 1993 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
    ASTM D 2244 : 2021 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2745 : 2000 : R2008 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
    ASTM D 1729 : 2016 : REDLINE Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 2745 : 2000 : R2017 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
    ASTM D 3964 : 2010 : R2015 Standard Practice for Selection of Coating Specimens for Appearance Measurements
    ASTM D 2244 : 2015 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 4838 : 1988 : R2010 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
    ASTM D 3964 : 2010 : R2020 Standard Practice for Selection of Coating Specimens for Appearance Measurements
    ASTM D 2244 : 2023 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2011 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 1729 : 2016 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 2244 : 2009 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 3964 : 2004 Standard Practice for Selection of Coating Specimens for Appearance Measurements
    ASTM D 2244 : 2002 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2016 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM E 284 : 2022 Standard Terminology of Appearance
    ASTM D 2244 : 2015 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2009 : REV B Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2002 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 4838 : 1988 : R1998 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
    ASTM E 284 : 2017 : REDLINE Standard Terminology of Appearance
    ASTM D 3964 : 2010 Standard Practice for Selection of Coating Specimens for Appearance Measurements
    ASTM D 2244 : 2015 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 4838 : 1988 : R2003 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
    ASTM D 3964 : 1980 : R1998 Standard Practice for Selection of Coating Specimens for Appearance Measurements
    ASTM D 1729 : 1996 : R2009 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 4838 : 1988 : R2016 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints (Withdrawn 2023)
    ASTM D 2244 : 2016 : REDLINE Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 3022 : 1984 : R1996 : EDT 1 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
    ASTM D 2244 : 2014 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 1729 : 1996 : R2003 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 2745 : 2000 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
    ASTM D 2244 : 2005 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2007 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 2022 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 1729 : 1996 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 1729 : 2022 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 2244 : 2009 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM D 2244 : 1993 : R2000 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
    ASTM E 284 : 2017 Standard Terminology of Appearance
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective