![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 3951 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Commercial Packaging
Hardcopy , PDF
09-10-2023
English
01-12-2015
Committee |
D 10
|
DocumentType |
Standard Practice
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice establishes minimum requirements for packaging of supplies and equipment, exclusive of ammunition, explosives, or hazardous materials, as covered in Title 49 of the Code of Federal Regulations.
1.2The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F 2045 : 2000 : R2018 : EDT 1 | Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
ASTM D 6256/D6256M : 2016 | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
ASTM F 2044 : 2009 : R2019 : EDT 1 | Standard Specification for Liquid Level Indicating Equipment, Electrical |
ASTM F 2168 : 2013 | Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
ASTM F 879 : 2015 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
ASTM A 1016/A1016M : 2018 : REV A | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
ASTM F 2046 : 2000 : R2017 | Standard Specification for Tachometers, Various |
ASTM F 1371 : 2013 : R2018 : EDT 1 | Standard Specification for Vegetable Peeling Machines, Electric |
ASTM F 1071 : 1994 : R2018 | Standard Specification for Expanded-Metal Bulkhead Panels |
ASTM F 957 : 1991 : R2018 | Standard Specification for Gong, Sound Signaling |
ASTM E 920 : 1997 : R2019 | Standard Specification for Commercially Packaged Laboratory Apparatus |
ASTM B 969/B969M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes |
ASTM B 893 : 1998 : R2018 | Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
ASTM D 6255/D6255M : 2018 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
ASTM F 467M : 2006 : REV A : R2018 | Standard Specification for Nonferrous Nuts for General Use (Metric) |
ASTM F 1755M : 1996 : R2018 | Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric) |
ASTM F 1072 : 1994 : R2018 | Standard Specification for Expanded-Metal Doors |
ASTM F 468M : 2006 : R2018 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
ASTM F 1023 : 2012 : R2018 | Standard Specification for Dispensers, Powdered Iced Tea |
ASTM B 108/B108M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Permanent Mold Castings |
ASTM B 650 : 1995 : R2018 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
ASTM B 955/B955M : 2018 | Standard Specification for Aluminum-Alloy Centrifugal Castings |
ASTM B 618/B618M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Investment Castings |
ASTM B 874 : 1996 : R2018 | Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process |
ASTM F 1511 : 2018 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
NASA-STD-8719.27:2022 | IMPLEMENTING PLANETARY PROTECTION REQUIREMENTS FOR SPACE FLIGHT |
ASTM F 2362 : 2003 : R2013 | Standard Specification for Temperature Monitoring Equipment |
ASTM A 1074 : 2011 : R2015 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
ASTM B 700 : 2008 : R2014 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
ASTM D 5486/D5486M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
ASTM F 2834 : 2010 : REV A : R2017 : EDT 1 | Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing |
ASTM B 545 : 2013 | Standard Specification for Electrodeposited Coatings of Tin |
ASTM F 879M : 2016 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Withdrawn 2023) |
ASTM F 1602 : 2012 : R2017 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
ASTM F 1182 : 2007 : R2013 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
ASTM E 921 : 1997 : R2016 | Standard Specification for Export Packaged Laboratory Apparatus |
ASTM F 2432 : 2012 : R2018 | Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment |
ASTM F 467 : 2013 : R2018 | Standard Specification for Nonferrous Nuts for General Use |
ASTM B 37 : 2018 | Standard Specification for Aluminum for Use in Iron and Steel Manufacture |
ASTM F 837 : 2013 : R2018 | Standard Specification for Stainless Steel Socket Head Cap Screws |
ASTM B 689 : 1997 : R2018 : EDT 1 | Standard Specification for Electroplated Engineering Nickel Coatings |
ASTM B 26/B26M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Sand Castings |
ASTM D 6412/D6412M : 1999 : R2012 | Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials |
ASTM F 1919 : 2014 | Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric |
ASTM F 917 : 2014 | Standard Specification for Commercial Food Waste Disposers |
ASTM D 3950 : 2017 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM F 1126 : 2012 : R2017 : EDT 1 | Standard Specification for Food Cutters (Electric) |
ASTM A 999/A999M : 2018 | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
ASTM F 1202 : 2016 | Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type |
ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM D 6787/D6787M : 2002 : R2017 | Standard Specification for Repositionable Note Pad |
ASTM F 880 : 2012 : R2017 | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
ASTM D 6254/D6254M : 2013 | Standard Specification for Wirebound Pallet-Type Wood Boxes |
ASTM D 6123/D6123M : 1997 : R2012 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
ASTM F 835 : 2018 | Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws |
ASTM F 3001 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
ASTM F 2798 : 2009 : R2018 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
ASTM F 1203 : 2016 | Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type |
ASTM B 605 : 1995 : REV A : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 952 : 2012 : R2017 | Standard Specification for Mixing Machines, Food, Electric |
ASTM D 6573/D6573M : 2013 | Standard Specification for General Purpose Wirebound Shipping Boxes |
ASTM F 2521 : 2009 : R2014 | Standard Specification for Heavy-Duty Ranges, Gas and Electric |
ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
ASTM F 2796 : 2019 | Standard Specification for Hot Food Holding Tables |
ASTM F 1966 : 2012 : R2017 : EDT 1 | Standard Specification for Dough Divider and Rounding Machines |
ASTM D 6251/D6251M : 2011 | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
ASTM F 880M : 2016 | Standard Specification for Stainless Steel Socket Set Screws (Metric) (Withdrawn 2023) |
ASTM F 594 : 2009 : R2015 | Standard Specification for Stainless Steel Nuts |
ASTM F 1360 : 2017 | Standard Specification for Ovens, Microwave, Electric |
ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM F 2891 : 2015 | Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated |
ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
ASTM F 2988 : 2018 | Standard Specification for Commercial Coffee Brewers |
ASTM F 1114 : 2016 | Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray |
ASTM D 6880/D6880M : 2011 | Standard Specification for Wood Boxes |
ASTM F 2191/F2191M : 2013 | Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
ASTM A 450/A450M : 2018 : REV A | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes |
ASTM F 837M : 2016 | Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
ASTM F 1963 : 2005 : R2017 : EDT 1 | Standard Specification for Deep-Fat Fryers, Gas or Electric, Open |
ASTM F 1603 : 2017 | Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated |
ASTM B 403 : 2012 | Standard Specification for Magnesium-Alloy Investment Castings |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
ASTM F 2645 : 2016 | Standard Specification for Bun Slicing Machines |
ASTM F 1568 : 2012 : R2017 : EDT 1 | Standard Specification for Food Processors, Electric |
ASTM F 1047 : 2017 | Standard Specification for Frying and Braising Pans, Tilting Type |
ASTM A 394 : 2008 : R2015 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
ASTM F 2800 : 2011 : R2017 | Standard Specification for Recirculating Hood System for Cooking Appliances |
ASTM A 563M : 2007 : R2013 | Standard Specification for Carbon and Alloy Steel Nuts (Metric) (Withdrawn 2021) |
ASTM B 840 : 2015 | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
ASTM F 1347 : 1991 : R2018 | Standard Specification for Manually Operated Fueling Hose Reels |
ASTM B 361 : 2016 | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
ASTM F 3055 : 2014 : REV A | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 3255 : 2019 | Standard Specification for Rapid Pull Down Refrigerators (Blast Chillers), Freezers (Blast Freezers), Combination Refrigerator/Freezer (Blast Chiller/Freezers), and Quick Chillers for Commercial Use |
ASTM B 912 : 2002 : R2018 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
ASTM F 2071 : 2000 : R2017 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
ASTM F 2281 : 2004 : R2017 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
ASTM F 1150 : 2016 | Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly |
ASTM A 502 : 2003 : R2015 | Standard Specification for Rivets, Steel, Structural |
ASTM B 842 : 1999 : R2016 | Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits |
ASTM F 1138 : 1998 : R2014 | Standard Specification for Spray Shields for Mechanical Joints |
ASTM F 593 : 2017 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
ASTM F 1495 : 2014 : REV A | Standard Specification for Combination Oven Electric or Gas Fired |
ASTM B 733 : 2015 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
ASTM F 2202 : 2002 : R2015 | Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets |
ASTM F 2070 : 2000 : R2017 | Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
ASTM D 5118/D5118M : 2015 | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
ASTM F 1510 : 2007 : R2013 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
ASTM B 984 : 2012 | Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use |
ASTM F 1899 : 2014 : REV A | Standard Specification for Food Waste Pulper Without Waterpress Assembly |
ASTM F 2835 : 2010 : R2017 | Standard Specification for Underfired Broilers |
ASTM D 5998 : 2016 | Standard Specification for Molded Polyethylene Shipping and Storage Drums |
ASTM F 1085 : 2014 | Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels |
ASTM D 6411/D6411M : 1999 : R2012 | Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
ASTM F 2520 : 2005 : R2012 | Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets |
ASTM B 777 : 2015 | Standard Specification for Tungsten Base, High-Density Metal |
ASTM F 1217 : 2017 | Standard Specification for Cooker, Steam |
ASTM D 5749 : 2017 | Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing |
ASTM F 2087 : 2013 : R2019 | Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick |
ASTM F 836M : 2016 : EDT 1 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
ASTM B 900 : 2016 | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
ASTM B 679 : 1998 : R2015 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
ASTM F 844 : 2007 : REV A : R2013 | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
ASTM F 2215 : 2015 | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications (Withdrawn 2024) |
ASTM F 1021 : 2018 | Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
ASTM D 6590/D6590M : 2000 : R2012 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
ASTM F 1145 : 2005 : R2017 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
ASTM F 1604 : 2015 | Standard Specification for Freezers, Ice Cream, Soft Serve, Shake |
ASTM F 2092 : 2014 | Standard Specification for Convection Oven Gas or Electric |
ASTM F 2154 : 2013 : R2019 | Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
ASTM B 660 : 2015 | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
ASTM D 5677 : 2017 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
ASTM F 901 : 2001 : R2017 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
ASTM F 2924 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
ASTM A 563 : 2015 | Standard Specification for Carbon and Alloy Steel Nuts |
ASTM B 456 : 2017 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
ASTM D 4649 : 2003 : R2016 | Standard Guide for Selection and Use of Stretch Wrap Films |
ASTM F 2646 : 2016 | Standard Specification for Bread Slicing Machines |
ASTM D 5363 : 2016 | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
ASTM B 488 : 2018 | Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
ASTM D 6788 : 2002 : R2017 | Standard Specification for Repositionable Pressure-Sensitive Flags |
ASTM F 468 : 2016 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
ASTM F 919 : 2015 | Standard Specification for Slicing Machines, Food, Electric |
ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
ASTM F 918 : 2015 | Standard Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product) |
ASTM D 4727/D4727M : 2017 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
ASTM B 686/B686M : 2018 | Standard Specification for Aluminum Alloy Castings, High-Strength |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.