ASTM D 5336 : 2015 : REV A
|
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material |
ASTM D 8069 : 2017 : REV A
|
Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending |
ASTM D 2990 : 2017
|
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ASTM D 4549 : 2015
|
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
ASTM D 638 : 2014
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 4634 : 2016
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
ASTM D 5927 : 2017
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
ASTM D 1238 : 2013
|
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 6098 : 2016
|
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
ASTM D 6112 : 2018
|
Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes |
ASTM D 5024 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression |
ASTM D 6835 : 2017
|
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
ASTM F 2026 : 2017
|
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
ASTM D 5083 : 2017
|
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
ASTM D 790 : 2017
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ASTM D 3965 : 2016
|
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
ASTM D 5026 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
ASTM D 6778 : 2014
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
ASTM D 4440 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology |
ASTM D 6779 : 2017
|
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
ASTM D 1043 : 2016
|
Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test |
ASTM D 5045 : 2014
|
Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
ASTM D 5628 : 2018
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
ASTM D 4093 : 1995 : R2014
|
Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials |
ASTM D 695 : 2015
|
Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM D 7192 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors |
ASTM D 706 : 2015
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
ASTM D 6339 : 2011 : R2019
|
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
ASTM D 6865 : 2017
|
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
ASTM D 732 : 2017
|
Standard Test Method for Shear Strength of Plastics by Punch Tool |
ASTM D 4203 : 2017
|
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
ASTM D 6712 : 2017
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
ASTM D 1922 : 2015
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM D 4067 : 2016
|
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
ASTM D 6338 : 2017
|
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM D 5138 : 2016
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
ASTM D 6262 : 2017
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
ASTM D 882 : 2018
|
Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
ASTM F 2820 : 2012
|
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
ASTM D 4066 : 2013
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
ASTM D 707 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
ASTM D 3935 : 2015
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
ASTM D 7293 : 2012
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
ASTM F 1488 : 2014 : R2019
|
Standard Specification for Coextruded Composite Pipe |
ASTM D 2583 : 2013 : REV A
|
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) |
ASTM D 1894 : 2014
|
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023) |
ASTM D 5205 : 2016
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
ASTM D 7474 : 2017
|
Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents |
ASTM D 788 : 2016
|
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
ASTM D 6108 : 2019
|
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
ASTM D 785 : 2008 : R2015
|
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials |
ASTM D 6394 : 2014
|
Standard Specification for Sulfone Plastics (SP) |
ASTM D 6261 : 2014
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
ASTM D 4976 : 2012 : REV A
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
ASTM D 1044 : 2013
|
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
ASTM D 1204 : 2014
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM D 3763 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
ASTM F 1499 : 2017
|
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
ASTM D 6272 : 2017
|
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
ASTM D 5740 : 2018
|
Standard Guide for Writing Material Standards in the Classification D4000 Format |
ASTM D 6713 : 2014
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
ASTM D 4673 : 2016
|
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
ASTM F 561 : 2019
|
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
ASTM D 7032 : 2017
|
Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
ASTM D 7292 : 2018
|
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) |
ASTM D 5023 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) |
ASTM D 952 : 2015
|
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials |
ASTM D 5857 : 2017
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 7436 : 2017
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
ASTM D 7750 : 2012 : R2017
|
Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer |
ASTM D 1822 : 2013
|
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
ASTM D 2582 : 2016
|
Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
ASTM F 3091/F3091M : 2014
|
Standard Specification for Powder Bed Fusion of Plastic Materials |
ASTM D 4065 : 2012
|
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
ASTM D 1938 : 2019
|
Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method |
ASTM D 1562 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
ASTM D 6693/D6693M : 2004 : R2015 : EDT 1
|
Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
ASTM D 618 : 2013
|
Standard Practice for Conditioning Plastics for Testing |
ASTM D 1004 : 2013
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 2673 : 2014
|
Standard Specification for Oriented Polypropylene Film |