ASTM D 7192 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
|
ASTM D 695 : 2015
|
Standard Test Method for Compressive Properties of Rigid Plastics
|
ASTM D 6112 : 2018
|
Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
|
ASTM D 5024 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
|
ASTM D 6835 : 2017
|
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
|
ASTM F 2026 : 2017
|
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
|
ASTM D 1043 : 2016
|
Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
|
ASTM D 5045 : 2014
|
Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
|
ASTM D 6098 : 2016
|
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
|
ASTM D 5083 : 2017
|
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
|
ASTM D 706 : 2015
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
|
ASTM D 6339 : 2011 : R2019
|
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
|
ASTM D 6865 : 2017
|
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
|
ASTM D 5628 : 2018
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
|
ASTM D 4093 : 1995 : R2014
|
Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
|
ASTM D 2582 : 2016
|
Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
|
ASTM F 3091/F3091M : 2014
|
Standard Specification for Powder Bed Fusion of Plastic Materials
|
ASTM D 4065 : 2012
|
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
|
ASTM D 1938 : 2019
|
Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
|
ASTM D 1562 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
|
ASTM D 6693/D6693M : 2004 : R2015 : EDT 1
|
Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
|
ASTM D 618 : 2013
|
Standard Practice for Conditioning Plastics for Testing
|
ASTM D 1004 : 2013
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
|
ASTM D 3763 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
|
ASTM F 1499 : 2017
|
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
|
ASTM D 6272 : 2017
|
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
|
ASTM D 5740 : 2018
|
Standard Guide for Writing Material Standards in the Classification D4000 Format
|
ASTM D 6713 : 2014
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
|
ASTM D 4673 : 2016
|
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
|
ASTM D 5927 : 2017
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
|
ASTM D 7032 : 2017
|
Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
|
ASTM D 7292 : 2018
|
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
|
ASTM D 5023 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
|
ASTM D 952 : 2015
|
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
|
ASTM D 5857 : 2017
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
|
ASTM D 7436 : 2017
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
|
ASTM D 7750 : 2012 : R2017
|
Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
|
ASTM D 1822 : 2013
|
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
|
ASTM D 2673 : 2014
|
Standard Specification for Oriented Polypropylene Film
|
ASTM D 732 : 2017
|
Standard Test Method for Shear Strength of Plastics by Punch Tool
|
ASTM D 4203 : 2017
|
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
|
ASTM D 6712 : 2017
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
|
ASTM D 1922 : 2015
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
|
ASTM D 4067 : 2016
|
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
|
ASTM D 6338 : 2017
|
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
|
ASTM D 5138 : 2016
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
|
ASTM D 6262 : 2017
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
|
ASTM D 882 : 2018
|
Standard Test Method for Tensile Properties of Thin Plastic Sheeting
|
ASTM F 2820 : 2012
|
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
|
ASTM D 4066 : 2013
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA)
|
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
|
ASTM D 707 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
|
ASTM D 3935 : 2015
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
|
ASTM D 7293 : 2012
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
|
ASTM F 1488 : 2014 : R2019
|
Standard Specification for Coextruded Composite Pipe
|
ASTM D 2583 : 2013 : REV A
|
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022)
|
ASTM D 1894 : 2014
|
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
|
ASTM D 5205 : 2016
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
|
ASTM D 7474 : 2017
|
Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
|
ASTM D 788 : 2016
|
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
|
ASTM F 561 : 2019
|
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
|
ASTM D 6108 : 2019
|
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
|
ASTM D 785 : 2008 : R2015
|
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
|
ASTM D 6394 : 2014
|
Standard Specification for Sulfone Plastics (SP)
|
ASTM D 6261 : 2014
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
|
ASTM D 4976 : 2012 : REV A
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
|
ASTM D 1044 : 2013
|
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
|
ASTM D 1204 : 2014
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
|
ASTM D 790 : 2017
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
ASTM D 3965 : 2016
|
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
|
ASTM D 5026 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
|
ASTM D 6778 : 2014
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
|
ASTM D 4440 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
|
ASTM D 6779 : 2017
|
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
|
ASTM D 1238 : 2013
|
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
|
ASTM D 5336 : 2015 : REV A
|
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
|
ASTM D 8069 : 2017 : REV A
|
Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
|
ASTM D 2990 : 2017
|
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
|
ASTM D 4549 : 2015
|
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
|
ASTM D 638 : 2014
|
Standard Test Method for Tensile Properties of Plastics
|
ASTM D 4634 : 2016
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
|