ASTM D 5025 : 2020 : REV A
Current
The latest, up-to-date edition.
Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
Hardcopy , PDF
English
01-04-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 20
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the physical dimensions and characteristics of a laboratory burner to be used as an ignition source for small-scale burning tests on plastic materials. The burner is used with methane, propane, or butane supply gases for flame heights of 20 to 125 mm.
1.2This fire standard cannot be used to provide quantitative measures.
1.3The burner described in this specification is suitable for use in the following ASTM standards: Specification C509, Test Method D229, Test Method D635, Test Method D876, Test Method D3014, Test Method D3801, Test Method D4804, Test Method D4986, and Test Method D5048. Safety hazards and known limitations on applicability of fire-test-response standards are addressed in the individual test methods.
Note 1:This specification is equivalent to the ignition source specified in IEC 60695-11-3, Annex A and IEC 60695-11-4, Annex A.
Note 2:This specification is equivalent to the P/PF2 ignition source specified in ISO 10093.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2633 : 2013 : REV A | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 635 : 2018 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM D 3014 : 2019 : REV A | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM F 2456 : 2019 : REV A | Standard Specification for Youth-Resistant Firearms Containers (YRFCs) |
| ASTM D 5132 : 2020 | Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
| ASTM D 5048 : 2020 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
| ASTM D 4804 : 2020 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 4986 : 2020 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM E 3082 : 2020 | Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees |
| ASTM D 3801 : 2020 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM F 1505 : 2016 | Standard Specification for Insulated and Insulating Hand Tools |
| ASTM F 1955 : 2015 | Standard Test Method for Flammability of Sleeping Bags |
| ASTM D 5207 : 2014 | Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 470 : 2013 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM E 3020 : 2016 : REV A | Standard Practice for Ignition Sources |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM E 176 : 2021 : REV A : EDT 1 | Standard Terminology of Fire Standards |
| ASTM E 176 : 2018 : REV A : EDT 1 | Standard Terminology of Fire Standards |
| ASTM C 509 : 1984 | Standard Specification for Cellular Elastomeric Preformed Gasket And Sealing Material |
| ASTM E 176 : 2024 | Standard Terminology of Fire Standards |
| ASTM E 176 : 2024 : REV A | Standard Terminology of Fire Standards |
| ASTM D 635 : 2022 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM D 876 : 2021 | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| ASTM E 176 : 2021 | Standard Terminology of Fire Standards |
| ASTM C 509 : 2000 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material |
| ASTM D 4804 : 2023 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM E 176 : 2018 : REV A : EDT 2 | Standard Terminology of Fire Standards |
| ASTM D 1600 : 2018 | Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
| ASTM D 229 : 2019 : EDT 1 | Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ASTM D 876 : 2013 | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| ASTM C 509 : 2006 : R2015 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material |
| ASTM D 4986 : 2022 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM C 509 : 2006 : R2021 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material |
| ASTM E 176 : 2021 : REV A | Standard Terminology of Fire Standards |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.