ASTM D 5071 : 2006 : R2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
Hardcopy , PDF
05-01-2022
English
11-04-2013
CONTAINED IN VOL. 08.02, 2014 Specific procedures and test conditions that are applicable for xenon arc exposure of photodegradable plastics conducted in accordance with Practices G 151 and G 155.
Committee |
D 20
|
DocumentType |
Standard Practice
|
Pages |
6
|
ProductNote |
Reconfirmed 2013
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers specific procedures and test conditions that are applicable for xenon arc exposure of photodegradable plastics conducted in accordance with Practices G151 and G155. This practice also covers the preparation of test specimens, the test conditions best suited for photodegradable plastics, and the evaluation of test results.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 6954 : 2018 | Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
ASTM G 141 : 2009 : R2021 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
ASTM G 141 : 2009 : R2013 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
ASTM G 169 : 2001 : R2013 | Standard Guide for Application of Basic Statistical Methods to Weathering Tests |
ASTM D 3890:2005 | Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 3826 : 1998 : R2002 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 5870 : 1995 | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 3826 : 1998 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 5870 : 2016 : REDLINE | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM D 1293 : 1999 | Standard Test Methods for pH of Water |
ASTM D 2565 : 1992 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus with and Without Water for Exposure of Plastics |
ASTM D 5870 : 2011 | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM G 155 : 2021 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
ASTM D 3890 : 2018 | Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 2565 : 1999 | Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 1293 : 1999 : R2005 | Standard Test Methods for pH of Water |
ASTM G 169 : 2001 : R2021 | Standard Guide for Application of Basic Statistical Methods to Weathering Tests |
ASTM D 2565 : 1970 | Standard Recommended Practice For Operating Xenon Arc-Type (Water-Cooled) Light - And Water-Exposure Apparatus For Exposure Of Plastics |
ASTM D 3826 : 1998 : R2008 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 1293 : 2018 | Standard Test Methods for pH of Water |
ASTM D 3890 : 2005 : R2010 | Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser |
ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
ASTM G 155 : 2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
ASTM D 2565 : 2016 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 3890 : 2001 | Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser |
ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
ASTM D 3826 : 1998 : R2013 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 2565 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 1293 : 2012 | Standard Test Methods for pH of Water |
ASTM D 3826 : 2018 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 5870 : 2016 | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM D 1293 : 1984 : R1990 | Standard Test Methods for pH of Water |
ASTM D 3826 : 1991 : EDT 1 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.