ASTM D 5155 : 2019
Current
The latest, up-to-date edition.
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
Hardcopy , PDF
English
01-08-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.These test methods are used to measure the isocyanate content of aromatic isocyanates used as polyurethane raw materials.
| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods are used to measure the isocyanate content of aromatic isocyanates used as polyurethane raw materials.
1.1.1Test Method A—Unheated toluene-dibutylamine determines the toluene diisocyanate content, the amine equivalent and the isocyanate content of refined toluene-2,4-diisocyanate and toluene-2,6-diisocyanate, or mixtures of the two. Other isomers, if present, will be included in the determination. This test method is also applicable to other isocyanates of suitable reactivity and solubility.
1.1.2Test Method B—Heated toluene-dibutylamine determines the amine equivalent and the isocyanate content of crude or modified isocyanates derived from toluene diisocyanate, methylene di-(4-phenylisocyanate) and polymeric (methylene phenylisocyanate).
1.1.3Test Method C—Unheated trichlorobenzene-toluene-dibutylamine determines the amine equivalent and the isocyanate content of crude or modified isocyanates derived from toluene diisocyanate, methylene-di-(4-phenylisocyanate) and polymeric (methylene phenylisocyanate).
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1:Method C of this test method is equivalent to Method B of ISO 14896.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 1193 : 2024 | Standard Specification for Reagent Water |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2935 : 2017 | Standard Practice for Conducting Equivalence Testing in Laboratory Applications |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 2935 : 2020 | Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 2935 : 2020 : EDT 1 | Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 2935 : 2021 | Standard Practice for Evaluating Equivalence of Two Testing Processes |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.