ASTM D 516 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Sulfate Ion in Water
Available format(s)
PDF
Superseded date
17-03-2023
Superseded by
Language(s)
English
Published date
23-06-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.01, 2017 Defines the determination of sulfate in water in the range from 5 to 40 mg/L of sulfate ion(SO[4]).
| Committee |
D 19
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This turbidimetric test method covers the determination of sulfate in water in the range from 5 to 40 mg/L of sulfate ion (SO4−−).
1.2This test method was used successfully with drinking, ground, and surface waters. It is the user's responsibility to ensure the validity of this test method for waters of untested matrices.
1.3Former gravimetric and volumetric test methods have been discontinued. Refer to Appendix X1 for historical information.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| UNE 7131:1958 | Identical |
| ASTM E 1219 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
| ASTM D 4195 : 2008 | Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application |
| NACE RP 05 02 : 2002 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
| ASTM D 7518 : 2010 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 2010/D2010M : 1998 : R2010 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ASTM D 3306 : 2014-05 | SPECIFICATION FOR GLYCOL BASE ENGINE COOLANT FOR AUTOMOBILE AND LIGHT-DUTY SERVICE |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
| ASTM D 4328 : 2008 : R2013 | Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines |
| ASTM E 1357 : 1990 : R2001 | Standard Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by <i>Thiobacillus Ferrooxidans</i> (Withdrawn 2010) |
| ASTM D 4130 : 2015 : REDLINE | Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines |
| I.S. CEN TS 15289:2006 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| ASTM D 7714 : 2011 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 4692 : 2001 : R2017 | Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO<inf >4</inf>, SrSO<inf>4</inf>, and BaSO<inf>4</inf>) for Reverse Osmosis and Nanofiltration |
| CEN/TS 15289:2006 | Solid Biofuels - Determination of total content of sulphur and chlorine |
| NACE 5 : 2002 | SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING |
| NACE SP 05 02 : 2010 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
| ASTM D 5216 : 1998 | Standard Specification for Propylene Glycol Base Engine Coolant for Automobile and Light-Duty Service (Withdrawn 2000) |
| MIL-DTL-24671 Revision C:2002 | CLOTH, LINT-FREE, FLUSHING AND CLEANING |
| AASHTO R 27 : 2001 : R2010 | PRACTICE FOR ASSESSMENT OF CORROSION OF STEEL PILING FOR NON-MARINE APPLICATIONS |
| ASTM D 5091 : 1995 : R2001 | Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications |
| ASTM D 4692 : 2001 : R2006 : EDT 1 | Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO<sub>4</sub>, SrSO<sub>4</sub>, and BaSO<sub>4</sub>) for Reverse Osmosis and Nanofiltration |
| AASHTO R 27 : 2001 : R2015 | PRACTICE FOR ASSESSMENT OF CORROSION OF STEEL PILING FOR NON-MARINE APPLICATIONS |
| ASTM E 1418 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
| ASTM E 1208 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
| ASTM D 4656 : 1998 | Standard Specification for Prediluted Aqueous Ethylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobiles and Light-Duty Service (Withdrawn 2000) |
| ASTM D 5091 : 1995 | Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications |
| ASTM D 4692 : 2001 : R2010 | Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO<sub>4</sub>, SrSO<sub>4</sub>, and BaSO<sub>4</sub>) for Reverse Osmosis and Nanofiltration |
| ASTM E 1210 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
| ASTM D 2010/D2010M : 1998 : R2017 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ASTM D 5091 : 1995 : R2014 | Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications (Withdrawn 2023) |
| ASTM D 4985 : 2010 | Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| UNE-EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| ASME PV CODE 7 : 2017 | BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
| BS EN 15289:2011 | Solid biofuels. Determination of total content of sulfur and chlorine |
| ASTM E 1220 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
| ASTM D 4692 : 2001 | Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO<sub>4</sub>, SrSO<sub>4</sub>, and BaSO<sub>4</sub>) for Reverse Osmosis and Nanofiltration |
| ASTM E 1357 : 1990 : R1996 : EDT 1 | Standard Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by <i>Thiobacillus Ferrooxidans</i> |
| I.S. EN ISO 16994:2016 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE (ISO 16994:2016) |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| MIL-L-24131 Revision C:1995 | LUBRICANT, COLLOIDAL GRAPHITE IN ISOPROPANOL |
| MIL-PRF-2863 Revision C:2000 | Packing, Preformed, Condenser Tube, Non-Asbestos |
| ASTM D 1748 : 2010 | Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
| ASTM D 4195 : 2008 : R2014 | Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application (Withdrawn 2023) |
| ASTM D 5752 : 2010 : R2017 | Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines |
| ASTM D 8039 : 2016 | Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems |
| ASTM E 1209 : 2010 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
| ASTM D 6257 : 1998 | Standard Specification for Prediluted Aqueous Propylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2000) |
| ASTM C 375 : 1958 : R2006 | Standard Classification of Water Used in Milling of Porcelain Enamel |
| ASTM D 5345 : 1998 | Standard Specification for Prediluted Aqueous Ethylene Glycol Base Low-Silicate Engine Coolant (50 Volume % Minimum) for Heavy-Duty Engines Requiring an Initial Charge of Supplemental Coolant Additive (SCA) (Withdrawn 2000) |
| API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| UNI EN 15289 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| ASTM D 1748 : 2010 : R2015 | Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| ASTM D 7517 : 2009 | Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines |
| 13/30277477 DC : 0 | BS EN ISO 16994 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| ASTM D 4328 : 2008 | Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines |
| DIN EN 15289:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| DD CEN/TS 15289:2006 | Solid biofuels. Determination of total content of sulphur and chlorine |
| ASTM D 2010/D2010M : 1998 : R2004 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ASTM D 7714 : 2011 : R2016 : EDT 1 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 5091 : 1995 : R2007 | Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications |
| ASTM C 375 : 1958 : R2016 | Standard Classification of Water Used in Milling of Porcelain Enamel |
| ASTM C 375 : 1958 : R1999 | Standard Classification of Water Used in Milling of Porcelain Enamel |
| ISO 16994:2016 | Solid biofuels — Determination of total content of sulfur and chlorine |
| EN ISO 16994:2016 | Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016) |
| CSA S474 : 2004 : R2014 | CONCRETE STRUCTURES |
| BS EN ISO 16994:2015 | Solid biofuels. Determination of total content of sulfur and chlorine |
| ASTM D 2010/D2010M : 1998 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| 10/30219387 DC : 0 | BS EN 15289 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| CSA S474 :2004 | CONCRETE STRUCTURES |
| ASTM C 1797 : 2017 : REDLINE | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
| MIL-F-53040 Base Document:1984 | FUEL PREMIX, METHANOL-WATER, FOR FUEL CELL POWERPLANTS |
| I.S. EN 15289:2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| ASTM C 1797M : 2016 | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
| CSA ISO 16994 : 2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| ASTM D 7518 : 2010 : R2015 : EDT 1 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 5752 : 2010 | Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines |
| ASTM C 375 : 1958 : R2011 : EDT 1 | Standard Classification of Water Used in Milling of Porcelain Enamel |
| API 651 CHINESE : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| ASTM D 7517 : 2009 : R2014 | Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 4985 : 2010 : R2015 | Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| ASME PTC31 : 2011 | PERFORMANCE TEST CODES - HIGH-PURITY WATER TREATMENT SYSTEMS |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| PIP CVS02010 : 2016 | GEOTECHNICAL ENGINEERING INVESTIGATION SPECIFICATION |
| ASME PTC31 : 2011 : R2017 | PERFORMANCE TEST CODES - HIGH-PURITY WATER TREATMENT SYSTEMS |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ASTM D 2777 : 2013 : REDLINE | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM E 275 : 2008 | Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.