ISO/ASTM 51650:2013
|
Practice for use of a cellulose triacetate dosimetry system |
ISO 15559:1998
|
Practice for use of a radiochromic optical waveguide dosimetry system |
ASTM D 5412 : 1993 : R2011
|
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM E 685 : 1993 : R2013
|
Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography |
BS ISO 15558:1998
|
Practice for use of a polymethylmethacrylate dosimetry system |
ISO/ASTM 51276:2012
|
Practice for use of a polymethylmethacrylate dosimetry system |
BS ISO 15563:1998
|
Practice for use of the ethanol-chlorobenzene dosimetry system |
ASTM E 169 : 2016 : REDLINE
|
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis |
ASTM E 60 : 2011
|
Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
TT-P-2760 Revision A:1994
|
PRIMER COATING; POLYURETHANE, ELASTOMERIC |
BS ISO 15559:1998
|
Practice for use of a radiochromic optical waveguide dosimetry system |
ASTM E 2313 : 2015 : REDLINE
|
Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
ASTM D 2124 : 1999 : R2011
|
Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique (Withdrawn 2020) |
ASTM D 6697 : 2001
|
Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water (Withdrawn 2010) |
ASTM E 1205 : 2009
|
PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
ASTM D 5412 : 1993 : R2011 : EDT 1
|
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM D 2972 : 2015 : REDLINE
|
Standard Test Methods for Arsenic in Water |
ASTM D 6258 : 2017 : REDLINE
|
Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels |
ASTM D 6748 : 2002
|
Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
ASTM E 925 : 2009
|
Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm |
ASTM D 3113 : 1992 : R1998
|
Standard Test Methods for Sodium Salts of EDTA in Water (Withdrawn 2005) |
ASTM D 1840 : 2007 : R2013
|
Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
ASTM D 6342 : 2012 : R2017 : EDT 1
|
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
ASTM D 5831 : 2017 : REDLINE
|
Standard Practice for Screening Fuels in Soils |
ASTM D 6748 : 2002 : REV A : R2012
|
Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
ASTM D 3923 : 2008
|
Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices |
ASTM E 1164 : 2012 : EDT 1
|
Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
ASTM E 1310 : 2004
|
PRACTICE FOR USE OF A RADIOCHROMIC OPTICAL WAVEGUIDE DOSIMETRY SYSTEM |
ASTM D 3594 : 1993 : R2000
|
Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
ASTM D 4130 : 2015 : REDLINE
|
Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines |
ASTM D 1942 : 1980
|
Method of Test for Morpholine in Water |
ISO 15554:1998
|
Practice for dosimetry in gamma irradiation facilities for food processing |
ASTM E 1164 : 2012 : R2017 : EDT 1
|
Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
ASTM E 1276 : 2012
|
PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM |
ASTM D 5412 : 1993 : R2005
|
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM D 1768 : 1989 : R2009
|
Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption |
ASTM D 6122 : 2016-02
|
PRACTICE FOR VALIDATION OF THE PERFORMANCE OF MULTIVARIATE ONLINE, AT-LINE, AND LABORATORY INFRARED SPECTROPHOTOMETER BASED ANALYZER SYSTEMS |
ASTM E 1866 : 1997 : R2013
|
Standard Guide for Establishing Spectrophotometer Performance Tests |
ASTM F 1630 : 2000
|
Standard Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003) |
ASTM E 1164 : 2012
|
Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
ASTM E 424 : 1971 : R2015
|
Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
ASTM E 387 : 2004 : R2014
|
Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method |
MIL-DTL-7788 Revision H:2011
|
PANELS, INFORMATION, INTEGRALLY ILLUMINATED |
ASTM E 1026 : 2015 : REDLINE
|
Standard Practice for Using the Fricke Dosimetry System |
ASTM D 3594 : 1993
|
Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
ASTM D 2621 : 1987 : R2011
|
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
BS ISO 15570:1998
|
Practice for use of cellulose acetate dosimetry system |
BS ISO 15557:1998
|
Practice for use of a radiochromic film dosimetry system |
ASTM D 3133 : 2001
|
Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry |
17/30356677 DC : 0
|
BS ISO/ASTM 51538 - PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
ASTM D 4165 : 2006
|
Standard Test Method for Cyanogen Chloride in Water |
ASTM D 6501 : 2015 : REDLINE
|
Standard Test Method for Phosphonate in Brines |
ASTM D 2702 : 2005 : R2016
|
Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics |
ASTM D 3591 : 2017 : REDLINE
|
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
11/30235530 DC : 0
|
BS ISO D 51276 - PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM |
ASTM D 5086 : 2001
|
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
16/30344343 DC : 0
|
BS ISO/ASTM 51205 - PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
ASTM E 512 : 1994 : R2010
|
Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation |
ASTM D 6187 : 1997 : R2010
|
Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence (Withdrawn 2019) |
TT-P-2756 Revision A:1996
|
POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
MIL-PRF-23942 Revision A:1997
|
POLYBUTADIENE, LINEAR, CARBOXYL TERMINATED |
ASTM D 3650 : 1993 : R2011
|
Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis (Withdrawn 2018) |
ASTM D 6748 : 2002 : REV A
|
Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
ASTM D 3168 : 1985 : R2005
|
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
ISO 15563:1998
|
Practice for use of the ethanol-chlorobenzene dosimetry system |
ASTM D 6748 : 2002 : REV A : R2007
|
Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
ISO 15570:1998
|
Practice for use of cellulose acetate dosimetry system |
ASTM E 2056 : 2004 : R2010
|
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures |
ASTM D 1768 : 1989 : R2016
|
Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption |
ASTM E 387 : 2004 : R2009
|
Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method |
ASTM D 4193 : 2008 : R2013 : EDT 1
|
Standard Test Method for Thiocyanate in Water |
ASHRAE 74 : 1998
|
METHOD OF MEASURING SOLAR-OPTICAL PROPERTIES OF MATERIALS |
ASTM E 1866 : 1997 : R2007
|
Standard Guide for Establishing Spectrophotometer Performance Tests |
ASTM D 6303 : 1998
|
Standard Test Method for Formaldehyde in Water (Withdrawn 2007) |
ASTM E 424 : 1971 : R1993 : EDT 1
|
Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
ASTM E 1608 : 2015
|
Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV |
ASTM D 4165 : 2006 : R2012
|
Standard Test Method for Cyanogen Chloride in Water |
ASTM E 1341 : 2016 : REDLINE
|
Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry |
ASTM D 6187 : 1997 : R2003
|
Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence |
ASTM D 3594 : 1993 : R2006
|
Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
ASTM D 3168 : 1985 : R2011
|
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
ASTM E 685 : 1993 : R2005
|
Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography |
ASTM D 2124 : 1999 : R2004
|
Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique |
ASTM D 2124 : 1999 : EDT 1
|
Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique |
ASTM D 3923 : 2008 : R2014
|
Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices |
ASTM E 1538 : 2009
|
PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
ASTM E 1866 : 1997
|
Standard Guide for Establishing Spectrophotometer Performance Tests |
ASTM G 178 : 2016 : REDLINE
|
Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
ASTM D 5412 : 1993 : R2000
|
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM E 685 : 1993 : R2000
|
Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography |
ASTM D 4763 :2006
|
Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy |
ASTM D 2621 : 1987 : R2016
|
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
ASTM E 925 : 2009 : R2014
|
Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm |
ASTM D 1385 : 2007 : R2018 : EDT 1
|
Standard Test Method for Hydrazine in Water |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
ASTM E 2304 : 2003 : R2011
|
Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System (Withdrawn 2020) |
ISO 15557:1998
|
Practice for use of a radiochromic film dosimetry system |
ASTM D 859 : 2016 : REDLINE
|
Standard Test Method for Silica in Water |
ASTM E 2304 : 2003
|
Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System |
BS ISO 15555:1998
|
Practice for use of a ceric-cerous sulfate dosimetry system |
13/30282535 DC : 0
|
BS ISO/ASTM 51401 - PRACTICE FOR USE OF A DICHROMATE DOSIMETRY SYSTEM |
ASTM E 1900 : 2009
|
GUIDE FOR DOSIMETRY IN RADIATION RESEARCH ON FOOD AND AGRICULTURAL PRODUCTS |
ASTM D 2702 : 2005
|
Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics |
ASTM D 3168 : 1985 : R2016
|
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
ASTM D 3414 : 1998
|
Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy |
BS ISO 15561:1998
|
Practice for use of a dichromate dosimetry system |
ASTM D 1768 : 1989 : R2003
|
Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption |
ASTM D 4282 : 2015 : REDLINE
|
Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
ASTM D 3124 : 1998 : R2003
|
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
ASTM D 6248 : 1998 : R2004
|
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
GOST R 52714:2018
|
Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
ASTM D 1385 : 2007 : R2013 : EDT 1
|
Standard Test Method for Hydrazine in Water |
ASTM D 2914 : 2015 : REDLINE
|
Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
ASTM D 7996 : 2015
|
Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform (Withdrawn 2024) |
ASTM E 1401 : 2013
|
PRACTICE FOR USE OF A DICHROMATE DOSIMETRY SYSTEM |
ASTM D 3124 : 1998
|
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
ASTM E 1866 : 1997 : R2002
|
Standard Guide for Establishing Spectrophotometer Performance Tests |
ISO/ASTM 51275:2013
|
Practice for use of a radiochromic film dosimetry system |
ASTM D 3133 : 2001 : R2005
|
Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry (Withdrawn 2008) |
ASTM D 3082 : 2015 : REDLINE
|
Standard Test Method for Boron in Water |
ASTM D 4193:2008
|
Standard Test Method for Thiocyanate in Water |
ASTM E 387:2004
|
Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method |
ASTM D 5412 : 1993 : R2017 : EDT 1
|
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM D 2621 : 1987 : R2000
|
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
ASTM D 1687 : 2017 : REDLINE
|
Standard Test Methods for Chromium in Water |
ASTM D 3168 : 1985 : R1999
|
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
ASTM E 1615 : 2016 : REDLINE
|
Standard Test Method for Iron in Trace Quantities Using the FerroZine Method |
ASTM D 1768 : 1989 : R1995 : EDT 1
|
Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption |
ASTM E 685 : 1993
|
Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography |
ASTM D 3650 : 1993 : R2006
|
Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis |
ASTM D 5463 : 2013-03
|
GUIDE FOR USE OF TEST KITS TO MEASURE INORGANIC CONSTITUENTS IN WATER |
ASTM D 2269 : 2010
|
Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption |
ASTM D 2036 : 2009 : R2015
|
Standard Test Methods for Cyanides in Water |
ISO 15561:1998
|
Practice for use of a dichromate dosimetry system |
ISO 15558:1998
|
Practice for use of a polymethylmethacrylate dosimetry system |
AASHTO T 290 : 1995
|
METHOD OF TEST FOR DETERMINING WATER-SOLUBLE SULFATE ION CONTENT IN SOIL |
BS ISO 15554:1998
|
Practice for dosimetry in gamma irradiation facilities for food processing |
ISO 15565:1998
|
Practice for use of a radiochromic liquid dosimetry system |
DWA-M 143-20:2018
|
TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
ASTM D 6248 : 1998
|
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
03/310937 DC : DRAFT JUNE 2003
|
EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
BS ISO 15565:1998
|
Practice for use of a radiochromic liquid dosimetry system |
ASTM E 2056 : 2004
|
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures |
ASTM D 1840 : 2007
|
Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
ASTM D 5086 : 2001 : R2008
|
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
ASTM D 2036 : 2009
|
Standard Test Methods for Cyanides in Water |
ASTM D 3414 : 1998 : R2004
|
Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy |
ASTM D 3414 : 1998 : R2011 : EDT 1
|
Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy (Withdrawn 2018) |
ASTM D 3124 : 1998 : R2011
|
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
ASTM D 1252 : 2006
|
Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
ASTM D 1068 : 2015 : REDLINE
|
Standard Test Methods for Iron in Water |
ASTM E 394 : 2015 : REDLINE
|
Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
ASTM D 3867 : 2016 : REDLINE
|
Standard Test Methods for Nitrite-Nitrate in Water |
ASTM D 2703 : 1995
|
Standard Practice for Rubber Chemicals-Determination of Ultraviolet Absorbance Characteristics (Withdrawn 2000) |
GOST 849:2018
|
Primary nickel. SpecificationsE |
ASTM D 1252 : 2006 : R2012
|
Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
ASTM D 2702 : 2005 : R2011
|
Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics |
ISO 15555:1998
|
Practice for use of a ceric-cerous sulfate dosimetry system |
14/30315837 DC : 0
|
BS ISO/ASTM 51026 - PRACTICE FOR USING THE FRICKE REFERENCE-STANDARD DOSIMETRY SYSTEM |
ASTM E 1655 : 2017 : REDLINE
|
Standard Practices for Infrared Multivariate Quantitative Analysis |
ISO/ASTM 51401:2013
|
Practice for use of a dichromate dosimetry system |
ASTM D 2621 : 1987 : R2005
|
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
ASTM D 516 : 2016 : REDLINE
|
Standard Test Method for Sulfate Ion in Water |
ASTM E 2056 : 2004 : R2016
|
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures |
DIN 51451:2004-09
|
TESTING OF PETROLEUM PRODUCTS AND RELATED PRODUCTS - ANALYSIS BY INFRARED SPECTROMETRY - GENERAL WORKING PRINCIPLES |
ASTM C 1580 : 2015 : REDLINE
|
Standard Test Method for Water-Soluble Sulfate in Soil |
MIL P 7788 : F
|
PANEL, INFORMATION INTEGRALLY ILLUMINATED |
ASTM D 4763 : 2006 : R2012
|
Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy |
ASTM E 512 : 1994 : R2015
|
Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation |
MIL P 23377 : G
|
PRIMER COATING, EPOXY, HIGH SOLIDS |
ASTM D 2269 : 2010 : R2015
|
Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption |
NACE TM 03 99 : 2005
|
Standard Test Method for Phosphonate in Brine |
ASTM E 424 : 1971 : R2007
|
Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
ASTM D 2330 : 2002
|
Standard Test Method for Methylene Blue Active Substances (Withdrawn 2011) |
ASTM D 3650 : 1993 : R1999
|
Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis |
ASTM D 3594 : 1993 : R2013
|
Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019) |
ASTM D 6187 : 1997
|
Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence |
ASTM E 424 : 1971 : R2001
|
Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
ASTM E 60 : 2011 : R2016
|
Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
ISO/ASTM 51026:2015
|
Practice for using the Fricke dosimetry system |
ASTM D 2621 : 1987 : R1995 : EDT 1
|
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
ASTM D 1426 : 2015 : REDLINE
|
Standard Test Methods for Ammonia Nitrogen In Water |
ASTM D 1385 : 2007
|
Standard Test Method for Hydrazine in Water |
ASTM D 6248 : 1998 : R2012 : EDT 1
|
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021) |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM E 1275 : 2013
|
PRACTICE FOR USE OF A RADIOCHROMIC FILM DOSIMETRY SYSTEM |
ASTM G 214 : 2016 : REDLINE
|
Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications |
ASTM D 1252 : 2006 : R2012 : EDT 1
|
Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
ASTM D 5086 : 2001 : R2013
|
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
ASTM D 6342 : 20121
|
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
ASTM E 2808 : 2011
|
Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis |
ASTM E 2193 : 2016 : REDLINE
|
Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
ASTM E 903 : 2012
|
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres |
ASTM E 1540 : 2004
|
PRACTICE FOR USE OF A RADIOCHROMIC LIQUID DOSIMETRY SYSTEM |
ASTM E 512 : 1994 : R2004
|
Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation |
ASTM E 512 : 1994 : R1999
|
Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation |
ASTM D 3591 : 2017 : REDLINE
|
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |