ASTM D 7412 : 2018
|
Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM D 6987/D6987M : 2013 : REV A
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)
|
ASTM D 6823 : 2008 : R2013
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
|
ASTM D 8111 : 2019
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
|
ASTM D 4951 : 2014
|
Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
|
ASTM D 7720 : 2011 : R2017
|
Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
|
ASTM D 5966 : 2013
|
Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine (Withdrawn 2022)
|
ASTM D 6594 : 2019
|
Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C
|
ASTM D 6074 : 2015
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
|
ASTM D 7415 : 2018
|
Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM D 6224 : 2016
|
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
|
ASTM D 117 : 2018
|
Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
|
ASTM D 7455 : 2019
|
Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
|
ASTM E 2412 : 2010 : R2018
|
Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM D 7578 : 2018
|
Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
|
ASTM D 5968 : 2019
|
Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
|
ASTM D 7260 : 2019
|
Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
|
ASTM D 7973 : 2019
|
Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
|
ASTM D 8120 : 2017
|
Standard Test Method for Ferrous Debris Quantification
|
ASTM D 5708 : 2015
|
Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
|
ASTM D 7422 : 2017 : REV A
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
|
ASTM D 7583 : 2016
|
Standard Test Method for John Deere Coolant Cavitation Test
|
ASTM D 6448 : 2016
|
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
|
ASTM D 6681 : 2017
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
|
ASTM D 7155 : 2018
|
Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
|
ASTM D 8048 : 2019
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
|
ASTM D 7151 : 2015
|
Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
|
ASTM D 7111 : 2016
|
Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
|
ASTM D 7596 : 2014
|
Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
|
ASTM D 6923 : 2018
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
|
ASTM D 8047 : 2018
|
Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
|
ASTM D 8074 : 2018
|
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
|
ASTM D 8056 : 2018
|
Standard Guide for Elemental Analysis of Crude Oil
|
ASTM D 7156 : 2017
|
Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
|
ASTM D 7919 : 2014 : R2017
|
Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
|
ASTM D 7040 : 2004 : R2015
|
Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
|
ASTM D 7666 : 2012
|
Standard Specification for Triglyceride Burner Fuel
|
ASTM D 8256 : 2019
|
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
|
ASTM B 999 : 2015
|
Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
|
ASTM D 7303 : 2017
|
Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
|
ASTM D 6750 : 2019
|
Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
|
ASTM D 5967 : 2017
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
|
ASTM D 7414 : 2018
|
Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM D 7876 : 2013 : R2018
|
Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
|
ASTM D 4378 : 2013
|
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
|
ASTM D 7844 : 2018
|
Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM D 7589 : 2016
|
Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref >
|
ASTM D 6891 : 2015
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
|
ASTM D 6443 : 2014 : R2019 : EDT 1
|
Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
|