ASTM D 523 : 2014 : R2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Specular Gloss
Available format(s)
PDF
Language(s)
English
Published date
01-05-2018
Superseded date
27-06-2025
Superseded by
€69.17
Excluding VAT
CONTAINED IN VOL. 06.01, 2018 Defines the measurement of the specular gloss of nonmetallic specimens for glossmeter geometries of 60, 20, and 85 degrees.
| Committee |
E 12
|
| DocumentType |
Test Method
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2018
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the measurement of the specular gloss of nonmetallic specimens for glossmeter geometries of 60, 20, and 85° (1-7).2
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1006/D1006M : 2021 | Standard Practice for Conducting Exterior Exposure Tests of Hand and Factory Applied Paints on Wood and Wood Composite Materials |
| ASTM F 2957 : 2013 : R2025 | Standard Specification for Ornamental Aluminum Fence Systems |
| ASTM F 718 : 2022 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM D 2218 : 1967 : R2019 | Standard Specification for Molybdate Orange Pigments |
| ASTM D 3758 : 2024 | Standard Practice for Evaluation of Spray-Buff Products on Test Floors |
| ASTM D 5767 : 2018 : R2023 | Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces |
| ASTM D 3134 : 2015 : R2024 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 6279 : 2020 | Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 4587 : 2023 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 7786 : 2013 : R2019 | Standard Test Method for Determining Enamel Holdout |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM F 2589 : 2016 : R2021 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM D 3322 : 2023 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM G 179 : 2004 : R2019 | Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests |
| ASTM D 6578/D6578M : 2013 : R2024 | Standard Practice for Determination of Graffiti Resistance |
| ASTM D 2457 : 2021 | Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics |
| ASTM B 915 : 2022 | Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating |
| ASTM D 3361/D3361M : 2022 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM E 179 : 2017 : R2022 | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| ASTM D 6763 : 2016 : R2022 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM A 755/A755M : 2018 : R2024 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM D 4101 : 2024 | Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
| ASTM D 1729 : 2022 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 6695 : 2024 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 7489 : 2024 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
| ASTM D 3052 : 2023 | Standard Practice for Rating Water-Emulsion Floor Polishes |
| ASTM D 7270 : 2007 : R2021 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| ASTM D 5402 : 2019 : R2024 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 1455 : 2017 : R2023 | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish |
| ASTM D 5031 : 2023 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 6577 : 2024 : REV A | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 5324 : 2016 : R2022 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 6037 : 2021 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 6900 : 2010 : R2020 | Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
| ASTM D 6625 : 2013 : R2020 | Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus |
| ASTM D 6486 : 2023 | Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM D 5531 : 2017 : R2023 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 7195 : 2021 | Standard Guide for Setting Object Color Specifications |
| ASTM D 2454 : 2023 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM G 201 : 2023 | Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation |
| ASTM D 6943 : 2015 : R2024 | Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
| ASTM D 822 : 2023 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM C 584 : 2024 | Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products |
| ASTM F 2408 : 2016 : R2023 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASTM D 211 : 1967 : R2023 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
| ASTM D 2243 : 2020 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 3730 : 2017 : R2022 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 4141/D4141M : 2022 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 6736 : 2008 : R2019 | Standard Test Method for Burnish Resistance of Latex Paints |
| ASTM D 1014 : 2025 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM C 286 : 2022 | Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems |
| ASTM D 333 : 2001 : R2021 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 3451 : 2024 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 2248 : 2025 : REV A | Standard Practice for Detergent Resistance of Organic Finishes |
| SSPC-Paint 46:2024 | Elastomeric, Water Based, High-Build, Flat, Performance-Based Coating for Masonry and Concrete |
| ASTM D 3964 : 2010 : R2015 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| ASTM D 3964 : 2010 : R2020 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4039 : 1993 : R2004 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 3964 : 2004 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4039 : 2009 : R2015 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM E 430 : 2019 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 3964 : 2010 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM E 430 : 2023 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 3964 : 1980 : R1998 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 3980 : 1987 | Standard Practice for Interlaboratory Testing of Paint and Related Materials |
| ASTM D 4039 : 1993 : R1999 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 3980 : 1988 | Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998) |
| ASTM D 823 : 2018 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
| ASTM E 430 : 2011 : REDLINE | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 4039 : 2009 : R2023 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 3964 : 2010 : R2025 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4039 : 2009 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 823 : 2018 : R2022 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.