FED-STD-313 Revision D:1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
03-05-2021
1 Scope and Purpose
2 Referenced Documents
3 Definitions
4 Requirements
5 Material Safety Data Sheet Receipt Points
6 Notes
APPENDIX A - Identification of Hazardous Items by Federal
Supply Class/Group (FSC/FSG)
10 FSC/FSG identification of hazardous items
10.1 FSC'S in which most Items are hazardous
10.2 Other FSG'S
Describes Material Safety Data Sheets requirements for contractors providing hazardous materials to Government activities.
Committee |
FSC MISC
|
DevelopmentNote |
D NOTICE 1 - Notice of Change (01/2004)
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
A-A-3127 Base Document:1998 | COATING SYSTEM: ALUMINUM EPOXY MASTIC FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
MIL C 7024 : D | CALIBRATING FLUID, AIRCRAFT FUEL SYSTEM COMPONENTS |
MIL-PRF-9117 Revision F:2014 | ADHESIVE; SEALING, FOR AROMATIC FUEL CELLS AND GENERAL REPAIR |
DOD-A-82720 Base Document:1982 | ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC) |
MIL-L-47058 Revision A:1991 | LITHIUM CHLORIDE, PURIFIED GRADE |
O-F-499 Revision D:1985 | FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT) |
O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION |
MIL-C-82827 Base Document:1989 | COMPOUND, ANTIOXIDANT |
MIL-V-82808 Base Document:1989 | |
DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
MIL I 24728 : A | INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR |
MIL P 24249 : A | PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, POUR-IN-PLACE, LARGE SCALE AND INSTALLATION OF |
MIL-STD-1216 Base Document:1969 | PREVENTIVE COMPOUNDS, PHOSPHATE COATINGS AND INHIBITORS |
MIL A 18455 : C | ARGON, TECHNICAL |
MIL-L-46152 Revision E:1990 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ADMINISTRATIVE SERVICE, METRIC |
MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
A-A-3161 Base Document:1998 | PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
MIL-E-29236 Base Document:1985 | EXPLOSIVES, BLASTING AGENT, SLURRY, WITH BOOSTERS MILITARY CONSTRUCTION |
DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
BB-H-886 Revision E:2011 | HYDROGEN |
MIL-P-85658 Base Document:1986 | PAINT, WATER DISPLACING |
P-C-111 Revision D:1977 | CARBON REMOVING COMPOUND |
MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
MIL M 81927 : B | MANUAL, TECHNICAL, GENERAL STYLE AND FORMAT OF (WORK PACKAGE CONCEPT) |
MIL STD 1427 : A NOTICE 1 | ACTIVATED DESICCANTS (METRIC) |
MIL-STD-1442 Revision A:1994 | INORGANIC PEROXIDES, TECHNICAL GRADE |
DOD-N-51512 Base Document:1985 | NICKEL SALTS, ELECTROPLATING (METRIC) |
A-A-51126 Revision B:1999 | ANODES, CADMIUM |
PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
MIL-P-82809 Base Document:1989 | POLYMER, LIQUID, HYDROXYL TERMINATED POLYBUTADIENE, WITH ANTIOXIDANT |
MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
MIL-I-82819 Base Document:1986 | INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED |
O-C-303 Revision D:1985 | CHROMIUM TRIOXIDE, TECHNICAL |
MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
MIL-P-11520 Revision F:1989 | PRESERVATIVE COATING, RUBBER, FOR RUBBER SURFACES |
MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
A-A-2765 Base Document:1991 | PENCIL, MECHANICAL FOR 1.1 MM LEAD SIZE |
MIL I 2818 : C | INSULATION BLANKET, THERMAL, FIBROUS MINERAL |
MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
MMM-A-132 Revision B:1994 | ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL |
O-N-350 Revision C:1991 | NITRIC ACID, TECHNICAL |
MIL-S-16917 Revision B:1984 | SODIUM BISULFATE (NITER CAKE) |
A-A-52561 Revision B:2004 | INK, PRINTING: LITHOGRAPHIC OFFSET, WITH DRIER |
A-A-3067 Base Document:1996 | PAINT: ALKYD, EXTERIOR, LOW VOC |
MIL R 20092 : L | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
TT-P-1952 Revision F:2015 | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
A-A-52417 Revision A:2009 | BATTERY, STORAGE: ALKALINE, NICKEL-CADMIUM |
MMM-A-1617 Revision B:1995 | ADHESIVE RUBBER BASE GENERAL PURPOSE |
A-A-3132 Revision A:2003 | COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
MIL C 82813 : NOTICE 1 | CURING AGENT, ISOPHORONE DIISOCYANATE |
MIL-O-82820 Base Document:1989 | OCTADECYL ISOCYANATE |
MIL-STD-1214 Revision A:1990 | ESTERS AND METAL ORGANICS, TECHNICAL GRADE |
MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
MIL I 2781 : F | INSULATION, PIPE THERMAL |
DOD STD 1445 : 1994-09-21 | METAL ORGANIC COMPOUNDS, TECHNICAL GRADE (METRIC) |
A-A-3126 Base Document:1972 | COATING SYSTEM: TILE-LIKE HIGH PERFORMANCE ARCHITECTURAL |
MIL F 83671 : A | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
MIL-STD-1447 Base Document:1988 | ETHERS AND ORGANIC PEROXIDES, TECHNICAL GRADE (METRIC) |
MIL-C-52032 Revision D:1995 | COATING, INTERIOR, FUEL RESISTANT, VOC COMPLIANT FOR GASOLINE CONTAINERS |
MIL-W-22759-1 Revision F:1992 | WIRE, ELECTRICAL, FLUOROPOLYMER- INSULATED, PTFE AND PTFE-COATED GLASS, SILVER-COATED COPPER CONDUCTOR, 600-VOLT |
MIL-A-82832 Base Document:1986 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING |
MIL W 46374 : F | WATCH, WRIST - GENERAL PURPOSE |
MIL-A-85705 Revision A:1987 | ADHESIVE, AIRCRAFT, FOR STRUCTURAL REPAIR |
MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
DOD C 22325 : A | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
A-A-3121 Revision A:2004 | PAINT, RUBBER-BASE: FOR INTERIOR USE (CONCRETE AND MASONRY FLOORS) |
MIL-C-19853 Revision D:1994 | CARBON REMOVING COMPOUND (FOR USE IN AGITATED TANK) |
A-A-3120 Base Document:1997 | PAINT: FOR SWIMMING POOLS |
MIL-I-82812 Base Document:1989 | IGNITION STRANDS |
MIL-C-70845 Revision A:1994 | CARTRIDGE, 9MM, PRACTICE, TRACER, M939 |
MIL-STD-1213 Revision A:1988 | ORGANIC LABORATORY REAGENTS |
TT-P-664 Revision D:1988 | PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
DOD P 24631 : (1) SUPP 1 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
A-A-2753 Base Document:1991 | INK, BLACK, FOR DUPLICATING PROCESS |
MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
VV L 001071 : A NOTICE 1 | LUBRICATING OIL, STEAM CYLINDER, MINERAL |
MIL T 38219 : B (1) | TURBINE FUEL, LOW VOLTALITY JP 7 |
MIL T 83483 : B | THREAD COMPOUND, ANTISEIZE, MOLYBDENUM DISULFIDE-PETROLATUM |
MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
MIL-I-82847 Base Document:1990 | IGNITION COMPOUND, MAGNESIUM-POLYTETRAFLUOROETHYLENE |
MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
MIL B 46176 : A | BRAKE FLUID, SILICONE, AUTOMOTIVE, ALL WEATHER, OPERATIONAL AND PRESERVATIVE, METRIC |
MIL H 87257 : 0 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT & MISSILE |
MIL F 24951 : B | FUEL OIL RECLAIMED |
MIL-A-11755 Revision E:1994 | ANTIFREEZE, ARCTIC-TYPE |
MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
MIL L 12039 : D | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
MIL-S-48567 Base Document:1977 | SLEEVE AND GRAIN ASSEMBLY |
MIL-H-24776 Base Document:1992 | HYDRAZINE TEST KIT, NAVAL SHIPBOARD |
MIL-PRF-32558 Base Document:2016 | BLAST SENSING AND BLAST DATA RECORDING SYSTEMS FOR USE IN U.S. MILITARY GROUND VEHICLES |
MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
A-A-52430 Revision A:2013 | Pads, Cushioning: Personnel-Protection, Vehicular (Metric) |
MIL-C-24314 Revision C:1985 | CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK) |
DOD-D-51524 Base Document:1986 | DYE, DISPERSE BLUE 3 (METRIC) |
O-B-420 Revision C:1976 | BLEACH, LAUNDRY, ORGANIC CHLORINE |
MIL-DTL-24696 Revision C:2008 | GASKET, SHEET, NON-ASBESTOS |
A-A-52495 Base Document:1994 | SEALING COMPOUND, NON CURING, POLYBUTENE |
MIL-M-23573 Revision B:1986 | MONOETHANOLAMINE CHELATING AGENT SOLUTION |
MIL-B-18013 Revision B:1994 | BATTERY, STORAGE, SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
O-C-1824 Base Document:1973 | CLEANING COMPOUND, SOLVENT, HEAVY DUTY, LIQUID |
MIL-STD-1203 Revision B:1991 | INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (ALUMINUM CHLORIDE THROUGH BORON NITRIDE) |
DOD-V-15218 Revision C:1977 | VARNISH (MIXING, PHENOLIC) (METRIC) |
MIL-M-24738 Base Document:1990 | MONITORS, HIGH TEMPERATURE MOTOR PROTECTION |
MIL T 81772 : B | THINNER, AIRCRAFT COATING |
MIL P 003984 : H | PROPELLANTS FOR SMALL ARMS AMMUNITION |
MIL-C-51047 Revision B:1987 | COMPOUND, ANTISEEPAGE, FOR COOLING SYSTEM, INTERNAL COMBUSTION ENGINE (METRIC) |
MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
MIL-R-6130 Revision C:1980 | RUBBER, CELLULAR, CHEMICALLY BROWN |
MIL-P-28578 Revision B:1988 | PAINT, WATER REDUCIBLE, SEMI-GLOSS EXTERIOR AND INTERIOR |
MIL-A-82845 Base Document:1987 | ADHESIVE, PASTE, ONE-PART, NON-ASBESTOS |
MIL-P-15280 Revision J:1988 | PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) |
MIL-PRF-24763 Revision B:2009 | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
MIL C 85054 : B | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, CLEAR (AMLGUARD) |
MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
DOD-P-15144 Revision B:1977 | PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) |
MIL-T-47063 Revision A:1991 | TRIETHYL CITRATE |
MIL-C-15074 Revision E:1991 | CORROSION PREVENTIVE, FINGERPRINT REMOVER |
MIL-A-24726 Base Document:1989 | ATTENUATORS, FIBER OPTIC, SHIPBOARD GENERAL SPECIFICATION FOR |
MIL-G-53042 Base Document:1984 | GUM PREVENTIVE COMPOUND, GASOLINE |
MIL T 82835 : NOTICE 1 | TAPE, FOAM |
MIL-P-87938 Base Document:1984 | PEROXIDE METHYL ETHYL KETONE, TECHNICAL |
VV-G-632 Revision B:1989 | GREASE, INDUSTRIAL, GENERAL PURPOSE |
A-A-3054 Base Document:1996 | PAINT: HEAT RESISTING (204 DEGREES C) |
MIL W 83779 : B | WATER INDICATING PASTE, METRIC |
MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE |
MIL-I-16411 Revision F:1988 | INSULATION FELT, THERMAL, GLASS FIBER |
A-A-56025 Base Document:1993 | Paste, Conductive |
MIL T 82831 : NOTICE 1 | |
MIL-C-47002 Revision A:1991 | COATING, POLYURETHANE, SINGLE COMPONENT SYSTEM |
MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
MIL L 63460 : D | LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS (METRIC) |
MIL C 87252 : B | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
MIL-STD-1443 Revision A:1994 | INORGANIC ACIDS AND ACID ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS) |
MIL-STD-612 Revision C:1993 | INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC) |
MIL-DTL-24709 Revision A:2018 | PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64 |
MIL-STD-1209 Revision B:1993 | INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (STRONTIUM NITRATE THROUGH ZINC OXIDE) |
MIL-STD-1205 Revision B:1993 | INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (FERRIC CHLORIDE THROUGH LITHIUM TETRAFLUOROBORATE) (METRIC) |
MIL-DTL-11414 Revision F:2013 | Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free |
MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
MIL-C-24500 Revision A:1990 | CLOTH, DRAPERY, BUNK CURTAIN, SLIPCOVERS AND LABELS, FIRE RETARDANT |
MIL-PRF-3043 Revision C:1998 | RESIN COATING, PERMANENT, FOR ENGINE COMPONENTS AND METAL PARTS |
A-A-59304 Revision A:2010 | METHYL ETHYL KETONE PEROXIDE (CATALYST) |
O-C-265 Revision C:1991 | CHEMICAL, ANALYTICAL, GENERAL SPECIFICATION FOR |
A-A-3130 Revision A:2003 | PAINT (FOR APPLICATION TO WET SURFACES) |
MIL-I-82799 Base Document:1989 | INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE |
DOD-C-24654 Base Document:1985 | COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
MIL-I-85062 Base Document:1977 | INHIBITOR, CORROSION, VOLATILE, TRANSMISSION AND GEARBOX |
MIL A 24641 : A | ACID, HYDROFLUORIC; TECHNICAL |
MIL-E-82803 Base Document:1989 | EXPLOSIVE, THIN LAYER |
A-A-3007 Base Document:1996 | THINNER, FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES |
DOD D 23443 : B | DI-(2-ETHYLHEXYL) ADIPATE, TECHNICAL |
MIL C 82604 : 0 | COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING) |
MIL-I-82787 Base Document:1990 | IGNITER ASSEMBLY, ROCKET MOTOR MK 104 |
MIL-STD-605 Revision B:1994 | INORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
MIL-H-19457 Revision D:1989 | HYDRAULIC FLUID, FIRE RESISTANT, NON NEUROTOXIC |
MIL-C-47069 Revision B:1991 | COATING, ELECTRICALLY CONDUCTIVE, AIR DRYING |
MIL-C-87179 Base Document:1984 | COATING, PROTECTIVE, SOLVENT REMOVABLE, FOR MICROCIRCUITS |
SS-S-200 Revision E:1984 | SEALANT, JOINT, TWO COMPONENTS, JET BLAST RESISTANT, COLD APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT |
MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
SS-S-1614 Revision A:1984 | SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS |
MIL P 85582 : B | PRIMER COATINGS: EPOXY, WATERBORNE |
MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
SAE AMS P 21600 : 2013 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
TT-A-511 Revision E:1992 | AMYL ACETATE, TECHNICAL |
O-S-642 Revision G:1993 | SODIUM PHOSPHATE, TRIBASIC, ANHYDROUS, DODECAHYDRATE, & MONOHYDRATE, TECHNICAL |
MIL-A-53009 Revision A:1991 | ADDITIVE, ANTIFREEZE EXTENDER, LIQUID COOLING SYSTEM |
MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
MIL-A-14064 Revision C:1980 | ADHESIVE: GRINDING DISK |
DOD-F-87935 Base Document:1984 | FLUID, MAGNETIC PARTICLE INSPECTION, SUSPENSION MEDIUM (METRIC) |
MIL-C-21723 Revision B:1994 | COMPOSITION CH-6 |
MIL-STD-1204 Revision C:1990 | INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (CALCIUM CARBIDE THROUGH CUPRIC SULFATE) |
A-A-3059 Base Document:1997 | PAINT: PHOTOLUMINESCENT, NONRADIOACTIVE, INTERIOR |
DOD-D-51486 Revision A:1986 | DYE MIX, GREEN SMOKE 7 |
MIL C 0024621 : A | COUPLERS, PASSIVE, FIBER OPTIC, GENERAL SPECIFICATION FOR |
MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
MIL-S-82858 Base Document:1986 | SILICONE DIOXIDE, MICROFINE |
A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
MIL-A-82834 Base Document:1986 | ADHESIVE, PASTE, ONE PART |
MIL-A-82802 Base Document:1989 | ADHESIVE AND SEALANT |
MIL-C-2861 Revision E:1988 | CEMENT, INSULATION, HIGH TEMPERATURE |
TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL |
MIL W 15000 : K | WATER-TESTING CHEMICALS, BOILER, SHIPBOARD USE |
TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
MIL-T-24708 Base Document:1988 | THERMAL/ACOUSTIC INSULATION BARRIER MATERIAL: POLYIMIDE FOAM |
VV-G-671 Revision G:2014 | GREASE, GRAPHITE |
MIL-P-2018 Revision J:1993 | PAINT, FACE, CAMOUFLAGE |
MIL-PRF-87978 Revision A:1996 | REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE, AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS |
O-S-801 Revision F:2001 | SULFURIC ACID, ELECTROLYTE (FOR STORAGE BATTERIES) |
TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
MIL M 23618 : G | MANUAL, TECHNICAL, PERIODIC MAINTENANCE REQUIREMENTS, PREPARATION OF |
O-S-639 Revision B:1984 | SODIUM PHOSPHATE, DIBASIC, ANHYDROUS, TECHNICAL |
MIL-C-22230 Revision B:1987 | CLEANING COMPOUND, FUEL TANK AND BILGE |
A-A-59155 Base Document:2003 | Nitrogen, High Purity, Special Purpose |
MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
MIL-A-82821 Base Document:1989 | ALUMINUM, SPHERICAL (60-MICROMETERS) |
MIL D 24613 : 0 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
SAE AMS QQ P 35 : 2005 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
MIL-DTL-29563 Revision B:2014 | Antenna System, Aims Shipboard, Electronically Steered OE-120/UPX |
MIL-E-24269 Revision B:1988 | EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE |
MIL-V-87939 Base Document:1989 | VAPOR-SUPPRESSING - FIRE EXTINGUISHING AGENT, FOAM CONCENTRATES FOR USE ON HYPERBOLIC PROPELLANTS |
QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
MIL-PRF-25134 Revision C:1996 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
MIL-F-14256 Revision F:1993 | FLUX, SOLDERING, LIQUID (ROSIN BASE) |
A-A-52471 Revision D:1995 | Extinguisher, Fire, CO2 2-1/2-Pound, with Bracket |
MIL-M-14 Revision H:1990 | MOLDING COMPOUNDS, THERMOSETTING |
MIL-P-46161 Revision A:1976 | PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED |
MIL-DTL-18295 Revision F:1998 | CHAINS AND FITTINGS FOR FLEET MOORING |
MIL G 23827 : B | GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW |
MIL L 3150 : C | LUBRICATING OIL, PRESERVATIVE MEDIUM |
TT-E-2784 Revision A:1991 | ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
MIL-R-82784 Base Document:1986 | ROD, PLASTIC |
A-A-2780 Base Document:1992 | TYPE CLEANER |
MIL-I-23128 Revision B:1982 | INSULATION BLANKET, THERMAL, REFRACTORY FIBER, FLEXIBLE |
TT-C-621 Revision B:1973 | CORRECTION FLUID, DUPLICATING MACHINE STENCIL |
SAE AMS C 19853 : 1998 | CARBON REMOVING COMPOUND (FOR USE IN AGITATED TANK) |
MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
MIL-D-81956 Revision A:1980 | DETERGENT, EXTERNAL REMOVABLE FUEL TANKS |
A-A-59338 Revision A:1999 | Water Quality Analysis Set: Purification (WQAS-P) |
MIL I 24698 : 0 | INFRARED THERMAL IMAGING SYSTEMS |
MIL-D-82675 Base Document:1977 | DIISOCYANATE, DIMERYL, C36 ALIPHATIC, TECHNICAL (DDI) |
MIL-T-82824 Base Document:1989 | |
MIL-C-81945 Revision B:1989 | COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
MS500163 Base Document:1991 | BAR, METAL, FLAT, COPPER BERYLLIUM ALLOY 172 |
A-A-52408 Base Document:1993 | Preservative Coating, Rubber: for Rubber Surfaces |
TT-P-29 Revision K:1991 | PAINT, LATEX |
MIL-C-11029 Revision D:1987 | CITRIC ACID, TECHNICAL |
MIL-STD-1206 Revision B:1993 | INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (FERRIC CHLORIDE THROUGH LITHIUM TETRAFLUOROBORATE (METRIC) |
MIL-S-8660 Revision C:1983 | SILICONE COMPOUND, NATO CODE NUMBER S 736 |
MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE |
MIL-S-81087 Revision C:1981 | SILICONE FLUID, CHLORINATED PHENYL METHYL POLYSILOXANE, NATO CODE NUMBER H-536 |
MIL-G-25537 Revision C:1984 | GREASE, AIRCRAFT, HELICOPTER OSCILLATING BEARING, NATO CODE NUMBER G-366, METRIC |
MIL L 46000 : C | LUBRICANT, SEMI-FLUID (AUTOMATIC WEAPONS) |
MIL-G-21164 Revision D:1981 | GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NAT O CODE NUMBER G353 |
MIL-STD-1446 Revision A:1994 | METAL ORGANIC COMPOUNDS, REAGENT GRADE (INCLUDING ACS & USP-NF COMPOUNDS) |
MIL-W-71125 Base Document:1992 | WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE |
MIL-DTL-512 Revision C:2001 | Aluminum Powder, Flaked, Grained, and Atomized |
DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
MIL-L-83795 Revision B:1994 | LAYOUT DYE, BLUE |
MIL G 17927 : C | GASKET, ASBESTOS METALLIC COVER, RUBBER CORE |
MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
MIL-P-17303 Revision D:1984 | PACKING MATERIAL, PLASTIC METALLIC AND PLASTIC NONMETALLIC |
MIL-P-50002 Revision B:1981 | PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
MIL-C-0010597 Revision F:1994 | CLEANING COMPOUND WITH CONDITIONER FOR ENGINE COOLING SYSTEMS |
TT-P-86 Revision H:1987 | PAINT, RED-LEAD BASE, READY-MIXED |
DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
MIL T 24494 : B | TETRA, TRI AND DISODIUM SALTS OF ETHYLENEDIAMINETETRAACETIC ACID (EDTA) WATER TREATMENT CHEMICALS, BOILER, SHIPBOARD USE |
MIL S 24521 : A | SODIUM NITRITE, TECHNICAL |
MIL-STD-613 Base Document:1986 | INORGANIC BASES AND BASIC ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS)(METRIC) |
TT-P-38 Revision E:1985 | PAINT, ALUMINUM, READY-MIXED |
MIL-S-15204 Revision D:1984 | SEALING COMPOUND, JOINT AND THREAD, HIGH TEMPERATURE |
MIL-R-23461 Revision A:1987 | RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING |
MIL-I-24718 Base Document:1990 | INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR |
MIL G 10924 : F | GREASE, AUTOMOTIVE AND ARTILLERY |
TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
MIL H 6083 : E | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
DOD-A-24682 Base Document:1987 | ADDITIVE, FUEL OIL STABILIZER |
MIL-DTL-53131 Revision A:1998 | LUBRICATING OIL, PRECISION ROLLING ELEMENT BEARING, POLYALPHAOLEFIN BASED |
MIL-DTL-24784 Revision D:2017 | MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS, GENERAL SPECIFICATION FOR |
MIL-P-11970 Revision C:1983 | POTASSIUM PERMANGANATE, TECHNICAL (METRIC) |
MIL-DTL-13528 Revision C:2009 | Hydrochloric Acid, Inhibited, Rust-Removing |
A-A-2785 Base Document:1992 | PENCIL, DRAFTING |
MIL-PRF-8116D:2014 | PUTTY, GENERAL PURPOSE, NON-HARDENING |
MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
MIL E 1115 : D | ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
MIL-A-82667 Revision A:1978 | AMMONIUM PERCHLORATE, GENERAL SPECIFICATION FOR |
MIL-D-3716 Revision B:1987 | DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION |
MIL PRF 38219 : C | TURBINE FUEL, LOW VOLATILITY, JP-7 |
MIL L 53074 : LATEST | LUBRICATING OIL, STEAM CYLINDER, MINERAL |
MIL-C-24782 Base Document:1993 | COATING, POWDERED FLUORPOLYMER FOR USE ON HIGH PRESSURE GAS FLASK INTERIORS |
MIL-P-24138 Revision A:1986 | PASSIVATOR COMPOUND, NAVY BOILER |
MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
MIL C 81309 : E | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING ULTRA-THIN FILM |
MIL-G-81827 Revision A:1983 | GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE |
MIL L 7870 : B | LUBRICATING OIL, GENERAL PURPOSE, LOW TEMPERATURE |
MIL-C-47220 Revision B:1985 | COOLANT FLUID, DIELECTRIC |
MIL-PRF-32348 Base Document:2010 | POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
MIL-C-40084 Revision C:1990 | CORROSION PREVENTIVE COMPOUND, WATER EMULSIFIABLE, OIL TYPE |
MIL D 12468 : C NOTICE 1 | DECONTAMINATING AGENT, STB |
MIL PRF 5624 : S | TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
MIL-I-16923 Revision H:1991 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY |
MIL-C-82747 Base Document:1988 | COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
MIL S 0024623 : A | SPLICE, FIBER-OPTIC, SHIPBOARD, GENERAL SPECIFICATION FOR |
MIL-C-87936 Revision A:1985 | CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
MIL-STD-1220 Revision B:1991 | MISCELLANEOUS ALCOHOLS AND AMINES, TECHNICAL GRADE |
MIL L 82815 : 0 | LIQUID, ANTISTATIC |
DOD D 51485 : A | DYE, SOLVENT YELLOW 33 (METRIC) |
DOD-P-24555 Base Document:1977 | PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC) |
MIL-A-46091 Revision B:1981 | ADHESIVE, BRAKE LINING TO METAL |
MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
MIL E 24617 : A | EDTA HARDNESS TESTING REAGENTS, BOILER FEEDWATER, SHIPBOARD USE |
O-E-780 Revision B:1992 | ETHYLENE GLYCOL MONOMETHYL ETHER, TECHNICAL |
A-A-2776 Base Document:1992 | PENCIL, WHITE CORRECTION LEAD |
MIL E 24635 : B | ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
A-A-2749 Base Document:1992 | INK, WRITING RED |
MIL-B-24781 Base Document:1993 | BATTERBOARD SYSTEMS, SYNTHETIC |
MIL-P-21929 Revision C:1991 | PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID 2 AND 4 POUNDS PER CUBIC FOOT |
O-A-51 Revision H:1992 | ACETONE, TECHNICAL |
MIL H 17672 : D | HYDRAULIC FLUID, PETROLEUM, INHIBITED |
MIL F 46162 : D | FUEL, DIESEL, REFEREE GRADE |
VV-P-216 Revision C:1982 | PENETRATING OIL (FOR LOOSENING FROZEN METALLIC PARTS) |
MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
MIL L 5020 : C | LIQUID, COMPASS, AIRCRAFT |
MIL-H-46001 Revision D:1989 | HYDRAULIC FLUID, PETROLEUM BASE, FOR MACHINE TOOLS |
MIL G 81322 : E | GREASE, AIRCRAFT, GENERAL PURPOSE, SIDE TEMPERATURE RANGE, NATO CODE NUMBER G-395 |
MIL-C-43616 Revision C:1981 | CLEANING COMPOUND, AIRCRAFT SURFACE |
MIL-PRF-6081 Revision E:2014 | LUBRICATING OIL, JET ENGINE |
MIL F 12070 : D | FOG OIL |
A-A-59665 Revision A:2013 | Morpholine, Technical |
MIL-I-82826 Base Document:1985 | IGNITER ASSEMBLY |
MIL-W-18142 Revision C:1990 | WOOD PRESERVATIVE SOLUTIONS, OIL SOLUBLE, SHIP AND BOAT USE |
MIL-S-210 Revision A:1985 | SODIUM OXALATE, TECHNICAL (METRIC) |
MIL-A-82801 Base Document:1989 | ALUMINUM, SPHERICAL (13-MICROMETERS) |
DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
MIL-STD-1438 Revision A:1984 | INDICATOR, ORGANIC, REAGENT GRADE |
DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
MIL-H-81019 Revision D:1984 | HYDRAULIC FLUID, PETROLEUM BASE, ULTRA-LOW TEMPERATURE |
TT-P-2756 Revision A:1996 | POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
MIL-DTL-87107 Revision E:2012 | Propellant, High Density Synthetic Hydrocarbon Type, Grade JP-10 |
O-G-491 Revision D:1992 | GLYCEROL, TECHNICAL (HIGH GRAVITY) |
TT-P-650 Revision D:1988 | PRIMER COATING, LATEX BASE, INTERIOR, WHITE (FOR GYPSUM WALLBOARD, OR PLASTER) |
MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
MIL-PRF-38299 Revision E:2011 | FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
MIL-DTL-53022 Revision C Interim Revision:2007 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
MIL-PRF-26915 Revision D:1997 | PRIMER COATING, FOR STEEL SURFACES |
MIL-PRF-83671 Revision B:1997 | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
DOD-T-82666 Revision A:1978 | TRIS-1-2-(2 METHYL AZIRINDYL) PHOSPHINE OXIDE |
TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
MIL-S-19653 Revision B:1984 | SEALING COMPOUND (WOOD BEDDING), FORTIFIED |
A-A-59168 Revision A:2014 | Layout Fluid (Dye), Blue |
A-A-2798 Base Document:1992 | LEAD, SYNTHETIC |
A-A-975 Revision A:0199 | LEAD, DRAWING |
MIL-D-14130 Revision A:1986 | B,B'-DIHYDROXYDIETHYL SULFIDE (THIODIGLYCOL), TECHNICAL |
MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
MIL L 6086 : D | LUBRICATING OIL, GEAR, PETROLEUM BASE |
MIL-W-215 Revision D:1989 | WHITE PHOSPHORUS (WP) |
MIL-R-17882 Revision E:1993 | REPAIR KIT, METALLIC PIPE AND GENERAL PURPOSE, DAMAGE CONTROL |
MIL-PRF-12039 Revision D:1990 | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
A-A-1788 Base Document:1997 | VARNISH, OIL: INTERIOR |
O-O-670 Revision C:1991 | ORTHOPHOSPHORIC (PHOSPHORIC) ACID, TECHNICAL |
MIL A 907 : E | ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
MIL-P-82816 Base Document:1990 | PRIMER, ADHESIVE |
MIL-I-24703 Base Document:1988 | INSULATION, PIPE, POLYPHOSPHAZENE, SHEET AND TUBULAR |
MIL-O-82672 Revision A:1986 | |
MIL-R-82804 Base Document:1989 | RESIN, EPOXY, LIQUID |
MIL-P-70550 Base Document:1986 | PELLET, RED PHOSPHORUS, FOR MORTAR CARTRIDGE 81MM, SMOKE, RP, M819 |
MIL-DTL-53022 Revision E:2012 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
SAE AMS R 6130 : 2001 | RUBBER, CELLULAR, CHEMICALLY BLOWN |
MIL-S-24771 Base Document:1992 | SENSOR, LEVEL, FLOAT TYPE, SHIPBOARD SEWAGE SYSTEMS |
MIL-C-82822 Base Document:1989 | CATALYST, BURNRATE |
A-A-52411 Revision A:2012 | INSULATION, MOLDED, NOISE BARRIER |
MIL-STD-608 Revision C:1991 | ALDEHYDES, KETONES, AND PEROXIDES TECHNICAL GRADE |
MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
A-A-2752 Base Document:0199 | INK, WRITING FOR FOUNTAIN AND DIP PENS |
A-A-2784 Base Document:1992 | INK, ROLL |
TT-E-781 Revision D:1992 | ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL |
MIL-C-82805 Base Document:1989 | COMPOUND, SILICONE RUBBER, HIGH STRENGTH, TWO-PART |
MIL-DTL-87177 Revision B:2014 | Lubricants, Corrosion Preventive Compound, Water Displacing, Synthetic |
MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
MIL-G-413 Revision C:1986 | GLUE, MARINE, AND AVIATION MARINE [WATERPROOF] |
SAE J 2359 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE |
ASTM E 3024/E3024M : 2016 | Standard Practice for Magnetic Particle Testing for General Industry |
UFC 4-440-01 : 2014 | UNIFIED FACILITIES CRITERIA - WAREHOUSES AND STORAGE FACILITIES |
MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
DOD G 24650 : 0 | GREASE, FOOD GRADE, FOOD PROCESSING EQUIPMENT (METRIC) |
MIL-B-85735 Base Document:1985 | BALLISTIC MODIFIER LC-12-15 |
MIL-S-82793 Base Document:1989 | SEALANT, UF 3195 |
DOD E 24607 : A | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
MIL-R-19523 Revision B:1990 | RELAY, CONTROL, NAVAL SHIPBOARD |
MIL-P-82797 Base Document:1989 | PRIMER FOR THERMAL BARRIER MATERIAL & HIGH TEMPERATURE SEALANTS |
MIL L 87177 : A | LUBRICANT, CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, SYNTHETIC |
MIL-A-81264 Base Document:1965 | ASBESTOS FELT OR MAT, RESIN IMPREGNATED |
MIL-C-82829 Base Document:1989 | CARBON BLACK |
DOD PRF 24176 : B | CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC) |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
O-S-635 Revision E:2007 | SODIUM POLYPHOSPHATES, TECHNICAL |
MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
MIL-DTL-81927 Revision C:1997 | MANUALS, TECHNICAL: WORK PACKAGE STYLE, FORMAT, AND COMMON TECHNICAL CONTENT REQUIREMENTS; GENERAL SPECIFICATION FOR (WORK PACKAGE CONCEPT) |
MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
SAE AMS 1534 : 2013 | CLEANER, AIRCRAFT GLASS WINDOW |
MIL T 6117 : D | TERMINAL, CABLE ASSEMBLIES, SWAGED TYPE |
MIL-R-5001 Revision B:1992 | RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM |
O-I-1279 Revision B:1993 | ION EXCHANGE RESINS |
MIL-L-6082 Revision E:1990 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE (NONDISPERSANT MINERAL OIL) |
VV-F-800 Revision E:1987 | FUEL OIL, DIESEL |
MIL-B-11188 Revision H:1994 | BATTERIES, STORAGE: LEAD-ACID, GENERAL SPECIFICATION FOR (METRIC) |
DOD-PRF-85734 Revision A:2004 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE |
MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
MIL-DTL-53030 Revision B Interim Revision:2003 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
MIL-DTL-11361 Revision E:2007 | MAGNESIUM CARBONATE |
DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
MIL-A-82843 Base Document:1990 | ADHESIVE, ELEVATED TEMPERATURE CURING |
MIL-P-22299 Revision B:1985 | PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) |
MIL-PRF-46147 Revision D:2008 | LUBRICANT, SOLID FILM, AIR CURED, CORROSION INHIBITING |
MIL-PRF-87100 Revision A:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
MIL G 83261 : A | GREASE, AIRCRAFT, EXTREME PRESSURE, ANTI WEAR |
MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
A-A-2770 Base Document:1992 | PENCIL, COPYING |
MIL-C-24576 Revision A:1987 | CLOTH, SILICA GLASS, CLOTH, COATED, GLASS, SILICONE RUBBER COATED |
DOD STD 1446 : LATEST | NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH) |
DOD I 24688 : 0 | INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM |
MIL L 81329 : C | LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737, METRIC |
MIL P 211 : E | PHOSPHORUS, RED, TECHNICAL |
MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
MIL-PRF-24951 Revision B:1995 | FUEL OIL RECLAIMED |
MIL-S-53021 Revision A:1988 | STABILIZER ADDITIVE, DIESEL FUEL |
MIL-G-81937 Revision A:1984 | GREASE, INSTRUMENT, ULTRA CLEAN, METRIC |
VV-L-825 Revision C:1997 | LUBRICATING OIL, REFRIGERANT COMPRESSOR, UNINHIBITED |
MIL-L-51050 Revision B:1971 | LABORATORY, PETROLEUM,SEMITRAILER MOUNTED |
MIL C 24712 : A | COATINGS, POWDER (METRIC) |
MIL-P-85856 Base Document:1988 | POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS GENERAL SPECIFICATION FOR |
MIL-PRF-83936 Revision C:1996 | REMOVER, PAINT, TANK TYPE - FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS AND OTHER AIRCRAFT AND SUPPORT EQUIPMENT |
MIL-C-18255 Revision E:1989 | CALKING COMPOUND, SYNTHETIC RUBBER BASE, WOODEN DECK SEAM APPLICATION |
A-A-2762 Base Document:1992 | TYPING ELEMENT (DAISY WHEEL, DISK TYPE) |
A-A-52465 Revision B:2016 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
PPP-C-1842 Revision B:1992 | CUSHIONING MATERIAL, PLASTIC, OPEN CELL (FOR PACKAGING APPLICATIONS) |
MIL L 53131 : 0 | LUBRICATING OIL, PRECISION ROLLING ELEMENT BEARING, POLYALPHAOLEFIN BASED |
MIL-PRF-24453 Revision B:2008 | INHIBITOR, CORROSION, SOLUBLE OIL |
A-A-52529 Revision A:2016 | HANGER, EXHAUST, MUFFLER AND TAILPIPE (METRIC) |
O H 00765 : D | HYDROCHLORIC ACID, TECHNICAL |
MIL G 24696 : B | GASKET, SHEET, NON-ASBESTOS |
MIL-STD-1208 Revision B:1991 | INORGANIC SODIUM SALTS AND COMPOUNDS, TECHNICAL GRADE |
MIL-A-82836 Base Document:1987 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS |
MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
SAE AMS R 5001 :1998(S2015) | RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM |
SAE AMS 2491 : 2015 | SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE (PTFE), PREPARATION FOR BONDING |
SAE J 2361 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATION BREAK-IN |
ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
MIL-T-5544 Revision C:1991 | THREAD COMPOUND, ANTISEIZE, GRAPHITE-PETROLATUM |
MIL-G-6032 Revision D:1984 | GREASE, PLUG VALVE, GASOLINE AND OIL RESISTANT NATO CODE NUMBER G 363, METRIC |
A-A-3185 Base Document:2001 | PAINT, LATEX (CONTAINING POST-CONSUMER MATERIAL) |
MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
MIL E 82668 : B | EXPLOSIVES, CYCLOTOL, 25/75 AND 29/71, RDX/TNT |
DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
SAE AMS M 7866 : 2017 | MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE |
MMM-A-101 Base Document:2016 | ADHESIVE, HAPS-FREE, BONDING VULCANIZED SYNTHETICS RUBBER TO STEEL |
MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
A-A-52450 Revision C:2014 | VERMICULITE, ABSORBENT (FOR PACKAGING LIQUID HAZARDOUS MATERIALS) |
MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
MIL-F-53080 Base Document:1988 | FUEL, ENGINE DESIGN, REFEREE GRADE, TYPE I AND TYPE II (METRIC) |
A-A-2757 Base Document:1991 | PENCIL, CARPENTER |
P-C-444 Revision B:1983 | CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
MIL-P-82522 Revision C:1990 | PROPELLANT, JET ENGINE, T-H DIMER, GRADE RJ-4 |
MIL-P-20088 Revision C:1986 | PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST |
MIL-C-7966 Revision C:1987 | CLOTH, COATED, RUBBER, NYLON BASE |
A-A-976 Revision A:1980 | PENCIL, LEAD DRAWING |
MIL P 24790 : 0 | PACKING MATERIAL, BRAIDED, NON ASBESTOS |
MIL C 6799 : J | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
MIL-T-47064 Revision A:1991 | |
DOD-R-18708 Revision B:1990 | RUST ARRESTING COATING, SHIPBOARD EXTERIOR, GRAY, NAVY FORMULA NO. 123G (METRIC) |
MIL A 24699 : 0 | ACOUSTICAL TRANSMISSION LOSS BARRIER MATERIAL |
MIL-P-22581 Revision C:1991 | PLASTIC SHEET, VIBRATION DAMPING (TYPE ML-D2) |
DOD P 24647 : A (2) | PAINT, ANTIFOULING, SHIP HULL (METRIC) |
MIL-S-11030 Revision F:1990 | SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
MIL C 70549 : 0 | CARTRIDGE, 81MM, SMOKE, RED PHOSPHORUS M819, WITH FUZE MTSQ M772 LOADING ASSEMBLING AND PACKING |
MIL-R-53086 Base Document:1988 | RUST CONVERTER, METRIC |
MIL-C-22325 Revision B:1988 | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
NASA MSFC SPEC 1918 : 1992 | ABLATIVE COMPOUND, THERMAL |
MIL-C-22542 Revision B:1987 | CLEANING COMPOUND, HIGH PRESSURE CLEANER, LIQUID |
MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
TT-E-545 Revision C:1986 | PRIMER (ENAMEL - UNDERCOAT, ALKYD, ODORLESS, INTERIOR, FLAT, TINTS & WHITE) |
MIL-PRF-82815 Base Document:1989 | LIQUID, ANTISTATIC |
MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
MIL-PRF-14105 Revision E:2011 | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
MIL I 52701 : B | INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0) |
O-O-690 Revision C:1992 | OXALIC ACID, DIHYDRATE, TECHNICAL |
A-A-3058 Base Document:1996 | PAINT, INTERIOR, FIRE RETARDANT |
MIL-G-16265 Revision F:1993 | GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS) |
TT-B-1325 Revision D:2007 | BEADS (GLASS SPHERES) RETRO-REFLECTIVE |
MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
MIL-PRF-18458 Revision C:2002 | GREASE, WIRE ROPE - EXPOSED GEAR |
MIL P 87107 : C | PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10 |
MIL-I-23310 Revision B:1984 | INHIBITORS, CORROSION, VOLATILE, OIL TYPE |
SAE AMS 3411 : 2016 | FLUX, SILVER BRAZING HIGH TEMPERATURE |
MIL L 2105 : D | LUBRICATING OIL, GEAR, MULTI PURPOSE |
MIL M 19863 : D | MOUNT, RESILIENT, TYPE 5B5.000H |
MIL-STD-1201 Revision C:1994 | ETHYL ALCOHOL (ETHANOL), TECHNICAL AND DENATURED GRADES |
MIL-H-53119 Base Document:1991 | HYDRAULIC FLUID, NONFLAMMABLE, CHLOROTRIFLUOROETHYLENE BASE |
DOD L 85336 : A | LUBRICANT, ALL WEATHER (AUTOMATIC WEAPONS) |
MIL-G-25013 Revision E:1983 | GREASE, AIRCRAFT, BALL AND ROLLER BEARING, NATO CODE NUMBER G-372, METRIC |
MIL-P-82823 Base Document:1983 | PRIMER, ADHESIVE, CHLORINATED RUBBER BASE |
MIL-PRF-29607 Base Document:1996 | CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING |
MIL-S-24340 Revision A:1988 | SEALING COMPOUND, DECK, POLYURETHANE (POLYETHER BASE) |
MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
MIL-D-83411 Revision A:1973 | DEICER/ANTI-ICER FLUID (FOR RUNWAYS AND TAXIWAYS) |
MIL-C-38736 Revision B Base Document:1984 | CLEANING COMPOUND, SOLVENT MIXTURES (METRIC) |
MIL-A-8243 Revision D:1985 | ANTI-ICING AND DEICING-DEFROSTING FLUIDS |
DOD-L-85645 Revision A:1988 | LUBRICANT, DRY THIN FILM, MOLECULAR BONDED (METRIC) |
MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
A-A-52469 Revision A:2012 | CEMENT, TREAD, RUBBER (METRIC) |
DOD D 51522 : 0 | DYE, DISPERSE RED 11 (METRIC) |
MIL STD 1215 : B NOTICE 1 | WATER PURIFICATION COMPOUNDS |
MIL V 47306 : B | VALVE, STOP LIFT CHECK |
MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
MIL-L-22851 Revision D:1990 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE, (ASHLESS DISPERSANT) |
MIL-H-22072 Revision C:1984 | HYDRAULIC FLUID, CATAPULT, NATO CODE NUMBER H-579 |
MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
MIL B 29595 : 0 | BATTERIES AND CELLS, LITHIUM, AIRCRAFT, GENERAL SPECIFICATION FOR |
TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
MIL-DTL-24641 Revision B:2015 | ACID, HYDROFLUORIC, TECHNICAL |
SAE AS 87132 : 2012(R2018) | LUBRICANT, CETYL ALCOHOL, 1-HEXADECANOL, APPLICATION TO FASTENERS |
SAE AIR 81 : 2016 | IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
MIL-I-15265 Revision C:1992 | INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) |
MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
O M 00232 : H | METHANOL (METHYL ALCOHOL) |
MIL-C-81302 Revision D:1985 | CLEANING COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE |
A-A-3183 Base Document:2000 | PAINT, LATEX, EXTERIOR, (FOR WOOD AND MASONRY) |
MIL-A-46153 Revision C:1991 | ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE |
MIL-STD-1435 Revision A:1993 | ETHERS, REAGENT GRADE (INCLUDING ACS & USP-NF COMPOUNDS) |
MIL-C-18480 Revision B:1982 | COATING COMPOUND, BITUMINOUS, SOLVENT, COAL-TAR BASE |
MIL-STD-1445 Revision A:1994 | METAL ORGANIC COMPOUNDS, TECHNICAL GRADE |
A-A-580 Revision A:1992 | LEAD HOLDER |
MIL-STD-1207 Revision B:1987 | INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (POTASSIUM BICARBONATE THROUGH SILVER CYANIDE) |
MIL P 2845 : 0 | PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS |
VV-D-1078 Revision B:1983 | DAMPING FLUID, SILICONE BASE (DIMETHYL POLYSILOXANE) |
MIL C 85285 : C | |
MIL-DTL-211 Revision F:2000 | Phosphorus, Red, Technical |
MIL-W-15234 Revision C:1988 | |
MIL-A-82785 Base Document:1986 | ADHESIVE, TWO PART, HIGH STRENGTH |
MIL-R-81294 Revision D:1990 | REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS |
MIL-STD-1367 Revision A:1989 | PACKAGING, HANDLING, STORAGE, AND TRANSPORTABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS) |
MIL H 27601 : B | HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC |
SAE AMS L 81846 : 2001 | LUBRICATING OIL, INSTRUMENT, BALL BEARING, HIGH FLASH POINT |
O-A-549 Revision A:1973 | ANTI FOGGING COMPOUND |
DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
A-A-2763 Base Document:1992 | TYPING, ELEMENT (DISK TYPE) |
MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
MIL-R-81903 Revision A:1977 | REMOVER, ACID ACTIVATED, FOR AMINE CURED EPOXY COATING SYSTEMS |
MIL-P-62680 Base Document:1992 | POWDER, NICKEL-CHROMIUM/ALUMINUM COMPOSITE (METRIC) |
MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
O-S-571 Revision G:1991 | SODIUM CARBONATE, ANHYDROUS, TECHNICAL |
TT-P-2760 Revision A:1994 | PRIMER COATING; POLYURETHANE, ELASTOMERIC |
O-S-809 Revision E:1990 | SULFURIC ACID, TECHNICAL |
TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
MIL-STD-1221 Revision B:1990 | PROTECTIVE COMPOUNDS (FOR PERSONNEL) |
A-A-2767 Base Document:1992 | INK, DRAWING, WATERPROOF, BLACK |
MIL-DTL-23618 Revision H:1997 | MANUALS, TECHNICAL: PERIODIC MAINTENANCE REQUIREMENTS, PREPARATION OF |
MIL L 9000 : H | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL |
MIL-P-28577 Revision B:1988 | PRIMER, WATER REDUCIBLE, CORROSION RESISTANT, FOR METAL SURFACES |
MIL-A-21016 Revision F:1990 | ADHESIVE, RESILIENT DECK COVERING |
MIL-STD-1448 Base Document:1990 | HYDROCARBON COMPOUNDS & SOLVENT DISTILLATES, TECHNICAL GRADE |
MIL-PRF-32548 Base Document:2016 | OCCUPANT SEAT BELT RESTRAINTS FOR USE IN U.S. MILITARY GROUND VEHICLES |
MIL-R-24719 Base Document:1989 | RESINS, VINYL ESTER, LOW PRESSURE LAMINATING |
MIL C 215 : C | CHEMICAL AGENT, WHITE PHOSPHORUS [WP] |
MIL C 55021 : B | CABLE, ELECTRICAL, SHIELDED SINGLES, SHIELDED AND JACKETED SINGLES, TWISTED PAIRS AND TRIPLES, INTERNAL HOOKUP |
MIL-C-55483 Revision B:1990 | CABLE POWER ELECTRICAL, FLAT THREE CONDUCTOR |
MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
MIL-STD-1217 Revision C:1991 | ORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
MIL C 82783 : NOTICE 1 | |
O S 00801 : D | SULFURIC ACID, ELECTROLYTE: FOR STORAGE BATTERIES |
MIL-T-82825 Base Document:1989 | |
MIL-E-24715 Base Document:1989 | EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211) |
O S 00809 : D | SULFURIC ACID, TECHNICAL |
MIL-I-24772 Base Document:1992 | INDICATOR, OXYGEN, COMBUSTIBLE GAS, CARBON MONOXIDE, AND HYDROGEN SULFIDE, PORTABLE (METRIC) |
MIL-C-17435 Revision C:1976 | CUSHIONING MATERIAL, FIBROUS GLASS |
MIL-I-24092 Revision D:1993 | INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
A-A-3108 Revision B:2004 | TINTING MEDIUM, ENAMEL: UNIVERSAL COLORANTS |
MIL E 15145 : C | ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
O-H-765 Revision E:1990 | HYDROCHLORIC ACID, TECHNICAL |
MIL C 10436 : L NOTICE 1 | COMPASS, MAGNETIC UNMOUNTED, LENSATIC LUMINOUS DIAL TRITIUM ACTIVATED, INDUCTION DAMPED, 5 DEG. AND 20 MIL GRADUATIONS, WITH CARRYING CASE |
MIL-P-82810 Base Document:1986 | |
MIL-A-82842 Base Document:1983 | ADHESIVE, CONDUCTIVE, LOW RESISTIVITY |
MIL C 11090 : F (1) | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
MIL L 2104 : F | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
DOD-PRF-24648 Base Document:1985 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
MIL-DTL-46162 Revision E:2002 | FUEL, DIESEL, REFEREE GRADE |
MIL-G-4343 Revision C:1978 | GREASE, PNEUMATIC SYSTEMS |
DOD L 24651 : 0 | LUBRICATING OIL, FOOD GRADE, FOOD PROCESSING EQUIPMENT (METRIC) |
MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
DOD-G-85733 Base Document:1986 | GREASE, HIGH TEMPERATURE, CATAPULT SYSTEM |
MIL-C-5545 Revision C:1983 | CORROSION PREVENTIVE, AIRCRAFT ENGINE, HEAVY OIL TYPE |
MIL-B-24155 Revision B:1986 | BOILER SCALE REMOVING COMPOUND |
MIL-C-82811 Base Document:1989 | COMPOUND, MOLD RELEASE, LIQUID |
MIL-P-24380 Revision B:1989 | PAINT, ANCHOR, CHAIN, SOLVENT TYPE, GLOSS BLACK |
MIL-C-17671 Revision F:1989 | CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 |
MIL-A-82830 Base Document:1990 | AMMONIUM PERCHLORATE, CONDITIONED (WITH REDUCED ALKALI METAL CONTENT) |
MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
MIL-I-25135 Revision E:1984 | INSPECTION MATERIALS, PENETRANTS |
SAE AS 8660 : 1999 | SILICONE COMPOUND NATO CODE NUMBER S-736 |
SAE AMS G 4343 : 2012 | GREASE, PNEUMATIC SYSTEM |
SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
SAE AMS 3410 : 2016 | FLUX, SILVER BRAZING |
SAE AMS 1631 : 2005 | CLEANER, CARPET WATER EXTRACTION TYPE |
CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.