ASTM D 5382 : 2002 : R2017
Current
Current
The latest, up-to-date edition.
Standard Guide to Evaluation of Optical Properties of Powder Coatings
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-06-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.02, 2017 Gives the user with a guide to the various available practices and test methods for the evaluation of color, color difference, gloss, and metamerism by both visual and by instrumental means.
| Committee |
D 01
|
| DocumentType |
Guide
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This standard provides the user with a guide to the various available practices and test methods for the evaluation of color, color difference, gloss, and metamerism by both visual and by instrumental means.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 4086 : 1992 : REV A : R2007 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM D 1535 : 2007 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1331 : 1996 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4086 : 2018 : R2023 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1331 : 2015 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 5767 : 2018 | Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces |
| ASTM D 4086 : 1992 : REV A : R2012 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1247 : 1992 : R2000 | Standard Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2616 : 2019 | Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale |
| ASTM D 2244 : 2023 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1535 : 2012 : REV A | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1729 : 2016 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 4039 : 1993 : R2004 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM E 1345 : 1998 : R2008 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1247 : 2003 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry (Withdrawn 2012) |
| ASTM D 3134 : 2015 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1331 : 2015 : R2023 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4039 : 2009 : R2015 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM E 284 : 2022 | Standard Terminology of Appearance |
| ASTM D 1535 : 2013 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1347 : 2003 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM E 430 : 2019 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 5767 : 2017-09 | TEST METHODS FOR INSTRUMENTAL MEASUREMENT OF DISTINCTNESS-OF-IMAGE GLOSS OF COATING SURFACES |
| ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4449 : 2015 : REDLINE | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 1247 : 2012 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM D 1535 : 1968 | Standard Method Of Specifying Color By The Munsell System |
| ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1541 : 1998 | Standard Practice for Specifying and Matching Color Using the Colorcurve System |
| ASTM E 430 : 2023 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM E 1347 : 1997 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM E 1247 : 2012 : R2017 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM D 1729 : 1996 : R2009 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 3134 : 2015 : R2024 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 4449 : 1990 : R1999 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 1349 : 2006 : R2013 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 1535 : 2008 : EDT 1 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1345 : 1998 : R2014 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4039 : 1993 : R1999 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 5767 : 1995 : R1999 | Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1729 : 1996 : R2003 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 1535 : 2014 : R2018 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 1535 : 2014 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1247 : 2012 : R2023 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5767 : 2018 : R2023 | Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces |
| ASTM E 1331 : 2004 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 3134 : 2015 : REDLINE | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 1535 : 2008 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 5767 : 1995 : R2004 | Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces |
| ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1349 : 1990 : R1998 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
| ASTM E 1349 : 2006 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry |
| ASTM D 1535 : 1997 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1360 : 1990 : R2000 : EDT 1 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
| ASTM D 3134 : 2015 : R2019 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 2616 : 1996 | Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale |
| ASTM D 1535 : 1989 | Standard Test Method for Specifying Color by the Munsell System |
| ASTM D 4086 : 1992 : REV A : R2003 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E 430 : 2011 : REDLINE | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 3134 : 1997 : R2003 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1535 : 2000 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1541 : 1998 : R2003 | Standard Practice for Specifying and Matching Color Using the Colorcurve System (Withdrawn 2007) |
| ASTM D 1729 : 1996 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 3134 : 1997 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 4449 : 2015 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM D 4449 : 2015 : R2021 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 1360 : 2005 : R2015 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
| ASTM E 1331 : 2009 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 3134 : 1997 : R2008 : EDT 1 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 1729 : 2022 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM E 1360 : 2005 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
| ASTM D 4039 : 2009 : R2023 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 1535 : 2012 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1345 : 1998 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1331 : 2015 : R2019 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 5767 : 1995 : R2012 | Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces |
| ASTM E 1349 : 2006 : R2022 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 4086 : 1992 : REV A : R1997 : EDT 1 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1535 : 2014 : R2023 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 4449 : 2008 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
| ASTM D 4039 : 2009 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM E 1345 : 1998 : R2008 : EDT 1 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1345 : 2024 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 1535 : 2006 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 1535 : 2001 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 2616 : 2012 | Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale |
| ASTM E 1349 : 2006 : R2018 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
| ASTM D 4086 : 2018 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1331 : 2015 : REDLINE | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1345 : 1998 : R2003 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 4449 : 1990 : R2004 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 1360 : 2005 : R2019 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
| ASTM E 1360 : 2005 : R2010 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
| ASTM D 5767 : 2017 | Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.