ASTM D 585 : 1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-01-1993
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.09, 2009 Defines a procedure for obtaining a sample to represent a lot of paper or paperboard, fiberboard, or related product, including converted paper products.
| Committee |
D 06
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice covers a procedure for obtaining a sample to represent a lot of paper or paperboard, fiberboard, or related product, including converted paper products (all hereafter referred to as paper ).
1.2 Prior to purchase, there should be agreement between buyer and seller on the size of the lot to be sampled (5.1), on details of the sampling procedure, the required physical and chemical properties, dimensional tolerances, etc., and the test methods to be employed.
1.3 Appendixes
1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.>
| Standards | Relationship |
| TAPPI T 400 : 2011 | Identical |
| ASTM D 824 : 1994 : R1998 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
| ASTM D 2423 : 1990 : R2007 | Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| ASTM D 722 : 1993 : R2007 | Standard Test Method for Grease Resistance of Paper (Withdrawn 2010) |
| ASTM D 589 : 1997 | Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing) |
| ASTM D 1224 : 1992 : R2001 | Standard Test Methods for Zinc and Cadmium in Paper |
| ASTM D 2534 : 1988 : R2012 | Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| ASTM D 5725 : 1999 | Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester |
| ASTM D 1834 : 1990 : R2000 | Standard Test Method for 20<sup>o</sup> Specular Gloss of Waxed Paper (Withdrawn 2004) |
| ASTM D 3522 : 1986 : R2002 : EDT 1 | Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing |
| ASTM F 1175 : 1988 : R1996 : EDT 1 | Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison |
| ASTM D 778 : 1997 : R2002 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
| ASTM D 828 : 2016 | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
| ASTM D 3458 : 2000 : R2005 | Standard Specification for Copies from Office Copying Machines for Permanent Records (Withdrawn 2010) |
| ASTM D 722 : 1993 : R2002 | Standard Test Method for Grease Resistance of Paper |
| ASTM D 4987 : 1999 : R2008 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper (Withdrawn 2010) |
| ASTM F 686 : 1994 : R2011 | Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter (Withdrawn 2020) |
| ASTM D 776 : 1992 : R1996 | Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board |
| ASTM D 686 : 1993 | Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper |
| ASTM D 774/D774M : 1997 : R2002 | Standard Test Method for Bursting Strength of Paper |
| ASTM D 919 : 1997 | Standard Test Method for Copper Number of Paper and Paperboard |
| ASTM D 727 : 1996 : R2006 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method (Withdrawn 2011) |
| ASTM D 2808 : 1969 : R1990 | Test Method for Compressive Strength of Corrugated Fiberboard (Short Column Test) (Withdrawn 1991) |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 528 : 1997 | Standard Test Method for Machine Direction of Paper and Paperboard |
| ASTM D 6819 : 2002 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM F 556 : 1988 : R2006 | Standard Test Method for Curl of Carbonless Copy Papers |
| ASTM F 778 : 1988 : R2001 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 3208 : 2000 : R2005 | Standard Specification for Manifold Papers for Permanent Records (Withdrawn 2010) |
| ASTM D 3285 : 1993 : R2005 | Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test) (Withdrawn 2010) |
| ASTM F 686 : 1994 : R2006 | Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter |
| ASTM D 778 : 1997 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
| ASTM D 982 : 2016 : REDLINE | Standard Test Method for Organic Nitrogen in Paper and Paperboard |
| ASTM D 3290 : 2000 | Standard Specification for Bond and Ledger Papers for Permanent Records |
| ASTM F 415 : 1987 : R2010 | Standard Test Method for Curl in Carbon Paper (Withdrawn 2016) |
| ASTM D 2019 : 1997 : R2007 | Standard Test Method for Dirt in Paper and Paperboard (Withdrawn 2010) |
| ASTM D 2423 : 1990 : R1997 | Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| ASTM D 3522 : 1986 : R1997 | Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing |
| ASTM D 3208 : 2000 | Standard Specification for Manifold Papers for Permanent Records |
| ASTM F 686 : 1994 : R2001 | Standard Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with an Electric or Electronic Typewriter |
| ASTM D 6804 : 2002 : R2011 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 4988 : 1996 : R2001 | Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper) |
| ASTM D 3521 : 1986 : R2007 | Standard Test Method for Surface Wax Coating On Corrugated Board |
| ASTM D 6833 : 2002 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
| ASTM D 4432 : 1998 | Standard Guide for Purchasing Papers Used in Continuous Computer Forms (Withdrawn 2003) |
| ASTM D 645/D645M : 1997 : R2007 | Standard Test Method for Thickness of Paper and Paperboard (Withdrawn 2010) |
| ASTM D 2043 : 1994 : R2002 | Standard Test Method for Silver Tarnishing by Paper |
| ASTM F 509 : 1986 : R2004 | Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes |
| ASTM D 1030 : 1995 : R1999 | Standard Test Method for Fiber Analysis of Paper and Paperboard |
| ASTM D 6101 : 1997 | Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis |
| BS ISO 1004-1:2013 | Information processing. Magnetic ink character recognition Print specifications for E13B |
| ASTM D 2534 : 1988 : R2004 | Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| ASTM D 2534 : 1988 : R1999 | Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 4250 : 1992 : R2003 | Standard Test Method for Water-Holding Capacity of Bibulous Fibrous Products (Withdrawn 2009) |
| ASTM D 2482 : 1997 : R2007 | Standard Test Method for Surface Strength of Paper (Wax Pick Method) (Withdrawn 2010) |
| ASTM D 777 : 1997 | Standard Test Methods for Flammability of Treated Paper and Paperboard |
| ASTM D 3521 : 1986 : R2002 | Standard Test Method for Surface Wax Coating On Corrugated Board |
| ASTM D 6804 : 2002 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM F 597 : 1983 : R2003 | Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter |
| ASTM D 6101 : 1997 : R2005 | Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis (Withdrawn 2010) |
| ASTM F 415 : 1987 : R2000 : EDT 1 | Standard Test Method for Curl in Carbon Paper |
| ASTM D 2482 : 1997 : R2002 | Standard Test Method for Surface Strength of Paper (Wax Pick Method) |
| ASTM D 1834 : 1990 : R1995 : EDT 1 | Standard Test Method for 20<sup>o</sup> Specular Gloss of Waxed Paper |
| ASTM F 1175 : 1988 : R2011 | Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison (Withdrawn 2020) |
| ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ISO 1004-1:2013 | Information processing — Magnetic ink character recognition — Part 1: Print specifications for E13B |
| ASTM D 2020 : 1992 : R2003 | Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009) |
| ASTM D 644 : 1999 : R2007 | Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying (Withdrawn 2010) |
| ASTM D 6804 : 2002 : R2015 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 589 : 1997 : R2007 | Standard Test Method for Opacity of Paper (15° Diffuse Illuminant <i>A</i>, 89 % Reflectance Backing and Paper Backing) (Withdrawn 2010) |
| ASTM D 3290 : 2000 : R2005 | Standard Specification for Bond and Ledger Papers for Permanent Records (Withdrawn 2010) |
| ASTM D 6819 : 2002 : EDT 3 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM D 4250 : 1992 : R1999 | Standard Test Method for Water-Holding Capacity of Bibulous Fibrous Products |
| ASTM D 2175 : 1997 : R2007 | Standard Test Method for Book Bulk and Book Bulking Number of Paper (Withdrawn 2010) |
| ASTM D 4918 : 1997 : R2002 | Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ASTM D 5650 : 1997 : R2002 | Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) |
| ASTM D 6136 : 1997 | Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
| ASTM D 686 : 1993 : R2007 | Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper (Withdrawn 2011) |
| ASTM D 643 : 1997 : R2007 | Standard Test Method for Folding Endurance of Paper by the Schopper Tester (Withdrawn 2010) |
| ASTM D 2020 : 1992 : R1999 | Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard |
| ASTM D 4714 : 1996 | Standard Test Method for Determination of Effect of Moist Heat (50% Relative Humidity and 90°C) on Properties of Paper and Board |
| ASTM F 556 : 1988 : R1996 : EDT 1 | Standard Test Method for Curl of Carbonless Copy Papers |
| ASTM D 919 : 1997 : R2002 | Standard Test Method for Copper Number of Paper and Paperboard (Withdrawn 2009) |
| ASTM D 2534 : 1988 : R2007 | Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| ASTM D 686 : 1993 : R2002 | Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper |
| ASTM D 6819 : 2002 : EDT 1 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM D 6148 : 1997 : R2002 | Standard Practice for the Separation and Examination of Stickies |
| ASTM F 778 : 1988 : R2007 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 3522 : 1986 : R2007 | Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing (Withdrawn 2012) |
| ASTM F 1175 : 1988 : R2001 | Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison |
| ASTM D 5802 : 1995 | Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM D 590 : 1993 : R2002 | Standard Test Method for Petroleum Wax in Paper (Withdrawn 2009) |
| ASTM D 5725 : 1999 : R2008 | Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester (Withdrawn 2010) |
| ASTM D 644 : 1999 : R2002 | Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying |
| ASTM D 5639/D5639M :2011 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D 5626 : 1994 : R2001 | Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas |
| ASTM D 2482 : 1997 | Standard Test Method for Surface Strength of Paper (Wax Pick Method) |
| ASTM D 778 : 1997 : R2007 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures) (Withdrawn 2010) |
| ASTM D 2423 : 1990 : R2002 | Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| ASTM D 643 : 1997 : R2002 | Standard Test Method for Folding Endurance of Paper by the Schopper Tester |
| ASTM D 3521 : 1986 : R2017 | Standard Test Method for Surface Wax Coating On Corrugated Board |
| ASTM D 6819 : 2002 : R2007 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus (Withdrawn 2011) |
| ASTM D 4988 : 1996 | Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper) |
| ANSI INCITS 62 : 1987 : R2002 | INFORMATION SYSTEMS - OPTICAL CHARACTER RECOGNITION (OCR) - PAPER USED IN OCR SYSTEMS |
| ASTM D 780 : 1995 : R1999 | Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test) |
| ASTM D 2177 : 1999 : R2003 | Standard Test Method for Ink Absorption of Blotting Paper (Withdrawn 2009) |
| ASTM D 6819 : 2002 : EDT 2 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM D 985 : 1997 | Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) |
| ASTM D 3521 : 1986 : R1997 | Standard Test Method for Surface Wax Coating On Corrugated Board |
| ASTM D 3301 : 2000 | Standard Specification for File Folders for Storage of Permanent Records |
| ANSI INCITS 62 : 1987 : R2017 | INFORMATION SYSTEMS - OPTICAL CHARACTER RECOGNITION (OCR) - PAPER USED IN OCR SYSTEMS |
| ASTM D 3285 : 1993 : R1999 | Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test) |
| ASTM D 6136/D6136M : 2015 : REDLINE | Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method |
| ASTM D 984 : 1997 : R2002 | Standard Test Methods for Reducible Sulfur in Paper |
| ASTM D 985 : 1997 : R2002 | Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) |
| ASTM D 5725 : 1999 : R2003 | Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester |
| ASTM D 5276 : 1998 : R2009 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 3458 : 2000 | Standard Specification for Copies from Office Copying Machines for Permanent Records |
| ASTM D 5342 : 1997 : R2007 | Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) (Withdrawn 2010) |
| ASTM F 597 : 1983 : R1998 : EDT 1 | Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter |
| ASTM D 5342 : 1997 | Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) |
| ASTM F 767 : 1998 : R2002 | Standard Test Method for Image Stability of Chemical Carbonless Paper to Light |
| ASTM F 778 : 1988 : R1993 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM F 556 : 1988 : R2001 | Standard Test Method for Curl of Carbonless Copy Papers |
| ASTM D 6548 : 2000 : R2005 | Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) (Withdrawn 2011) |
| ASTM D 4825 : 1997 : R2007 | Standard Test Method for Measurement of Curl in Cut-Sized Office Paper (Withdrawn 2010) |
| ASTM D 528 : 1997 : R2002 | Standard Test Method for Machine Direction of Paper and Paperboard |
| ASTM D 4825 : 1997 : R2002 | Standard Test Method for Measurement of Curl in Cut-Sized Office Paper |
| ASTM D 2423 : 1990 : R2017 | Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| ASTM D 4714 : 1996 : R2007 | Standard Test Method for Determination of Effect of Moist Heat (50 % Relative Humidity and 90C) on Properties of Paper and Board (Withdrawn 2010) |
| ASTM D 984 : 1997 | Standard Test Methods for Reducible Sulfur in Paper |
| ASTM D 774/D774M : 1997 : R2007 | Standard Test Method for Bursting Strength of Paper (Withdrawn 2010) |
| ASTM F 415 : 1987 : R2005 | Standard Test Method for Curl in Carbon Paper |
| ASTM D 959 : 80(1986) | METHOD FOR DROP TEST FOR FILLED BAGS |
| ASTM D 918 : 1999 : R2008 | Standard Test Method for Blocking Resistance of Paper and Paperboard (Withdrawn 2011) |
| ASTM D 1223 : 1993 : R2006 | Standard Test Method for Specular Gloss of Paper and Paperboard at 75° (Withdrawn 2010) |
| ASTM D 6833 : 2002 : EDT 2 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
| ASTM D 643 : 1997 | Standard Test Method for Folding Endurance of Paper by the Schopper Tester |
| ASTM D 726 : 1994 : R1999 | Standard Test Method for Resistance of Nonporous Paper to Passage of Air |
| ASTM D 644 : 1999 | Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying |
| ASTM D 2019 : 1997 | Standard Test Method for Dirt in Paper and Paperboard |
| ASTM D 726 : 1994 : R2003 | Standard Test Method for Resistance of Nonporous Paper to Passage of Air (Withdrawn 2009) |
| ASTM D 645/D645M : 1997 | Standard Test Method for Thickness of Paper and Paperboard |
| ASTM D 6125 : 1997 | Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
| ASTM D 4825 : 1997 | Standard Test Method for Measurement of Curl in Cut-Sized Office Paper |
| ASTM D 2043 : 1994 : R2007 | Standard Test Method for Silver Tarnishing by Paper |
| ASTM F 509 : 1986 : R2000 : EDT 1 | Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes |
| ASTM F 509 : 1986 : R2009 | Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes (Withdrawn 2015) |
| ASTM D 6804 : 2002 : R2007 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 645/D645M : 1997 : R2002 | Standard Test Method for Thickness of Paper and Paperboard |
| ASTM D 528 : 1997 : R2007 | Standard Test Method for Machine Direction of Paper and Paperboard (Withdrawn 2010) |
| ASTM F 605 : 1988 : R2001 | Standard Practice for Determining the Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM D 774/D774M : 1997 | Standard Test Method for Bursting Strength of Paper |
| ASTM D 589 : 1997 : R2002 | Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing) |
| ASTM D 6833 : 2002 : EDT 1 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
| ASTM D 2177 : 1999 | Standard Test Method for Ink Absorption of Blotting Paper |
| ASTM D 6148 : 1997 | Standard Practice for the Separation and Examination of Stickies |
| ASTM D 2658 : 2004 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 1030 : 1995 : R2007 | Standard Test Method for Fiber Analysis of Paper and Paperboard (Withdrawn 2011) |
| ASTM D 2658 : 2004 : R2009 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 5276 : 1998 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 5276 : 1998 : R2017 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM F 605 : 1988 : R1996 : EDT 1 | Standard Practice for Determining the Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set |
| ASTM F 767 : 1998 : R2008 | Standard Test Method for Image Stability of Chemical Carbonless Paper to Light |
| ASTM D 4714 : 1996 : R2001 | Standard Test Method for Determination of Effect of Moist Heat (50% Relative Humidity and 90°C) on Properties of Paper and Board |
| CSA Z243.41 : 1980 | OPTICAL CHARACTER RECOGNITION (OCR) PAPER |
| ASTM D 6548 : 2000 | Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
| ASTM D 5342 : 1997 : R2002 | Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) |
| ASTM F 556 : 1988 : R2011 | Standard Test Method for Curl of Carbonless Copy Papers (Withdrawn 2020) |
| ASTM D 1224 : 1992 : R1996 | Standard Test Methods for Zinc and Cadmium in Paper |
| ASTM D 5455 : 1993 : R1998 | Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) |
| ASTM D 2658 : 2004 : R2013 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 5455 : 1993 : R2003 | Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) (Withdrawn 2011) |
| ASTM F 1175 : 1988 : R2006 | Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison |
| ASTM D 727 : 1996 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 918 : 1999 | Standard Test Method for Blocking Resistance of Paper and Paperboard |
| ASTM F 686 : 1994 : R1996 | Standard Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with an Electric or Electronic Typewriter |
| ASTM D 2175 : 1997 : R2002 | Standard Test Method for Book Bulk and Book Bulking Number of Paper |
| ASTM F 767 : 1998 : R2013 | Standard Test Method for Image Stability of Chemical Carbonless Paper to Light (Withdrawn 2020) |
| ASTM D 6125 : 1997 : R2002 | Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
| ASTM D 984 : 1997 : R2007 | Standard Test Methods for Reducible Sulfur in Paper (Withdrawn 2010) |
| ASTM D 2019 : 1997 : R2002 | Standard Test Method for Dirt in Paper and Paperboard |
| ASTM D 5626 : 1994 : R2006 | Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas (Withdrawn 2011) |
| ASTM D 4987 : 1999 : R2003 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| ASTM D 6125 : 1997 : R2007 | Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) (Withdrawn 2010) |
| ASTM D 1223 : 1993 : R1998 | Standard Test Method for Specular Gloss of Paper and Paperboard at 75° |
| ASTM D 5276 : 1998 : R2004 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 5650 : 1997 : R2007 | Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) (Withdrawn 2010) |
| ASTM D 918 : 1999 : R2003 | Standard Test Method for Blocking Resistance of Paper and Paperboard |
| ASTM D 5650 : 1997 | Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) |
| ASTM D 3521 : 1986 : R2012 | Standard Test Method for Surface Wax Coating On Corrugated Board |
| ASTM D 824 : 1994 : R2007 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers (Withdrawn 2010) |
| ASTM F 597 : 1983 : R2008 | Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter (Withdrawn 2015) |
| ASTM F 605 : 1988 : R2011 | Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set (Withdrawn 2020) |
| ASTM D 2176 : 2016 | Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester |
| ASTM D 5626 : 1994 | Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas |
| ASTM F 767 : 1998 | Standard Test Method for Image Stability of Chemical Carbonless Paper to Light |
| ASTM D 1224 : 1992 : R2006 | Standard Test Methods for Zinc and Cadmium in Paper (Withdrawn 2010) |
| ASTM D 824 : 1994 : R2002 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
| ASTM D 780 : 1995 : R2003 | Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test) (Withdrawn 2009) |
| ASTM D 4987 : 1999 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| ASTM D 6148 : 1997 : R2007 | Standard Practice for Separation and Examination of Stickies (Withdrawn 2010) |
| ASTM D 6833 : 2002 : R2007 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus (Withdrawn 2011) |
| ASTM D 1968 : 2015 | Standard Terminology Relating to Paper and Paper Products |
| ASTM D 4521 : 1996 | Standard Test Method for Coefficient of Static Friction of Corrugated and Solid Fiberboard (Withdrawn 2001) |
| ASTM D 2534 : 1988 : R2017 | Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| ASTM D 5802 : 1995 : R2001 | Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) (Withdrawn 2009) |
| ASTM D 590 : 1993 : R1997 | Standard Test Method for Petroleum Wax in Paper |
| ASTM D 776 : 1992 : R2001 | Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board (Withdrawn 2009) |
| ASTM D 4918 : 1997 : R2007 | Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method (Withdrawn 2010) |
| ASTM D 4918 : 1997 | Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ASTM D 1029 : 1995 | Standard Test Method for Peeling Resistance of Paper and Paperboard (Withdrawn 2001) |
| ASTM D 3301 : 2000 : R2005 | Standard Specification for File Folders for Storage of Permanent Records (Withdrawn 2010) |
| ASTM D 727 : 1996 : R2001 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| ASTM D 2175 : 1997 | Standard Test Method for Book Bulk and Book Bulking Number of Paper |
| ASTM D 724 : 1999 | Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method) |
| ASTM D 2423 : 1990 : R2012 : EDT 1 | Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| ASTM D 4988 : 1996 : R2006 | Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper) (Withdrawn 2010) |
| ASTM D 5639/D5639M : 2011 : R2015 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM F 605 : 1988 : R2006 | Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set |
| ASTM D 779 : 2016 | Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method |
| ASTM D 985 : 1997 : R2007 | Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) (Withdrawn 2010) |
| MIL-STD-414 Base Document:1957 | SAMPLING PROCEDURE AND TABLE FOR INSPECTION BY VARIABLES FOR PERCENT DEFECTIVE |
| ASTM D 1968 : 2015 | Standard Terminology Relating to Paper and Paper Products |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ASTM D 528 : 1997 | Standard Test Method for Machine Direction of Paper and Paperboard |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.