ASTM D 7483 : 2013 : REV A : R2017
|
Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
|
ASTM D 7373 : 2012
|
Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model (Withdrawn 2021)
|
ASTM D 2425 : 2019
|
Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
|
ASTM D 4012 : 2015
|
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
|
ASTM D 7945 : 2016
|
Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
|
ASTM D 3831 : 2012 : R2017
|
Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
|
ASTM D 7751 : 2016
|
Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
|
ASTM D 1266 : 2018
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM D 7875 : 2014
|
Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
|
ASTM E 2056 : 2004 : R2016
|
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
|
ASTM D 6890 : 2018
|
Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
|
ASTM D 6378 : 2020
|
Standard Test Method for Determination of Vapor Pressure (VP<inf>X</inf>) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
|
ASTM D 7757 : 2017
|
Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
|
ASTM D 8267 : 2019 : REV A
|
Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
|
ASTM D 7344 : 2017 : REV A
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
|
ASTM D 97 : 2017 : REV B
|
Standard Test Method for Pour Point of Petroleum Products
|
ASTM D 2068 : 2017
|
Standard Test Method for Determining Filter Blocking Tendency
|
ASTM D 2266 : 2001 : R2015
|
Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
|
ASTM D 7756 : 2019
|
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
|
ASTM E 1655 : 2017
|
Standard Practices for Infrared Multivariate Quantitative Analysis
|
ASTM D 8183 : 2018
|
Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
|
ASTM D 7220 : 2012 : R2017
|
Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
|
ASTM D 8206 : 2018
|
Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)
|
ASTM D 7501 : 2018 : REV A
|
Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
|
ASTM D 7525 : 2014 : R2019 : EDT 1
|
Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
|
ASTM D 7798 : 2015
|
Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
|
ASTM D 8150 : 2017
|
Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
|
ASTM D 8243 : 2019
|
Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
|
ASTM D 445 : 2019 : REV A
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
|
ASTM D 7423 : 2017
|
Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
|
ASTM D 7623 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
|
ASTM D 8071 : 2019
|
Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
|
ASTM D 7463 : 2018
|
Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
|
ASTM D 7622 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
|
ASTM D 8148 : 2017
|
Standard Test Method for Spectroscopic Determination of Haze in Fuels
|
ASTM D 1552 : 2016 : EDT 1
|
Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
|
ASTM D 7619 : 2017
|
Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
|
ASTM D 6299 : 2020
|
Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
|
ASTM D 7060 : 2020
|
Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
|
ASTM D 7797 : 2018
|
Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
|
ASTM D 6259 : 2015 : R2019
|
Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
|
ASTM D 2532 : 2017
|
Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
|
ASTM D 7043 : 2017
|
Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
ASTM D 7419 : 2018
|
Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
|
ASTM D 7621 : 2016
|
Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
|
ASTM D 8146 : 2018
|
Standard Guide for Evaluating Test Method Capability and Fitness for Use
|
ASTM D 8126 : 2017
|
Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
|
ASTM D 7261 : 2017
|
Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
|
ASTM D 7576 : 2016
|
Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)
|
ASTM D 6708 : 2019 : REV A
|
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM D 6822 : 2012 : REV B : R2017
|
Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
|
ASTM D 6824 : 2013 : R2018
|
Standard Test Method for Determining Filterability of Aviation Turbine Fuel
|
ASTM D 7861 : 2014 : R2019
|
Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
|
ASTM D 7687 : 2017
|
Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
|
ASTM D 7847 : 2017
|
Standard Guide for Interlaboratory Studies for Microbiological Test Methods
|
ASTM D 6792 : 2017
|
Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
|
ASTM D 7346 : 2015
|
Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
|
ASTM D 7778 : 2015
|
Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
|
ASTM D 8098 : 2017
|
Standard Test Method for Permanent Gases in C<inf>2</inf> and C<inf>3</inf> Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
|
ASTM D 7345 : 2017
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
|
ASTM D 7236 : 2016 : REV A
|
Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
|
ASTM D 1218 : 2012 : R2016
|
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
|
ASTM D 130 : 2019
|
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
|
ASTM D 8166 : 2017
|
Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
|
ASTM D 7963 : 2019 : EDT 1
|
Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
|
ASTM D 4929 : 2019 : REV A
|
Standard Test Method for Determination of Organic Chloride Content in Crude Oil
|
ASTM D 1160 : 2018
|
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
|
ASTM D 56 : 2016 : REV A
|
Standard Test Method for Flash Point by Tag Closed Cup Tester
|
ASTM D 7096 : 2019
|
Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
|
ASTM D 2500 : 2017 : REV A
|
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
|
ASTM D 6450 : 2016 : REV A
|
Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
|
ASTM D 5481 : 2020
|
Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
|