![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 6389 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
Hardcopy , PDF
02-11-2023
English
07-06-2017
1.1 This practice describes the procedures used for testing geotextiles for chemical resistance to liquids.
Committee |
D 35
|
DocumentType |
Standard Practice
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice describes the procedures used for testing geotextiles for chemical resistance to liquids. Reinforcement geotextiles can also be tested per Practice D6213.
1.2This practice describes test methods for measuring changes in planar dimensions, tensile properties, and other optional physical, mechanical, and hydraulic properties caused by immersion in test liquids which may be representative of anticipated end-use conditions. This practice may be used to assess the extent to which a product's as-manufactured properties are affected by such immersion.
1.3This practice is intended to be used in conjunction with either Practice D5322 or D5496. The scope of this practice is limited to testing and reporting procedures for unexposed and exposed geotextile samples.
1.4Evaluation or interpretation of test data is beyond the scope of this practice.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 7.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7931 : 2018 | Standard Guide for Specifying Drainage Geocomposites |
ASTM D 6917 : 2016 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
ASTM D 4884/D4884M : 2014 : REV A | Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
ASTM D 7931/D7931M : 2021 : REV A | Standard Guide for Specifying Drainage Geocomposites |
ASTM D 6917 : 2016 : R2022 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
ASTM D 4884/D4884M : 2022 | Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
ASTM D 4603 : 2003 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM E 375 : 1975 : R1986 | Definitions of Terms Relating to Resinography (Withdrawn 1992) |
ASTM D 5322 : 1998 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
ASTM D 1238 : 2000 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1238 : 2004 : REV C | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 3895 : 1998 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 1695 : 1996 : R2001 | Standard Terminology of Cellulose and Cellulose Derivatives |
ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
ASTM D 5885 : 2006 : R2012 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
ASTM D 1695 : 2007 : R2012 | Standard Terminology of Cellulose and Cellulose Derivatives |
ASTM D 1238 : 2023 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 5261 : 2010 : R2018 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 1238 : 2013 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 5496 : 1998 : R2003 | Standard Practice for In Field Immersion Testing of Geosynthetics |
ASTM D 4716 : 2008 : R2013 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 4533 : 2004 : R2009 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 4491 : 1999 : REV A : R2009 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 1238 : 2010 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 3895 : 2007 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 3895 : 2019 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 4533 : 2011 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 4533 : 2004 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 5261 : 2010 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 3895 : 2006 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM D 4595 : 1986 : R2001 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 4533 : 1991 : R1996 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 3895 : 2003 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM D 4716 : 2000 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 5885 : 2006 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
ASTM D 4751 : 2021 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 5496 : 1998 : R2009 | Standard Practice for In Field Immersion Testing of Geosynthetics |
ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
ASTM D 4716 : 2002 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 5199 : 2001 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
ASTM D 5885 : 2004 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
ASTM D 4751 : 1999 : REV A | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4751 : 2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4491 : 1999 : REV A : R2004 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 16 : 2019 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
ASTM D 3895 : 2014 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
ASTM D 5261 : 1992 : R2003 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 4632 : 1991 : R1996 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 4595 : 2011 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 4603 : 2018 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM D 4603 : 1996 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
ASTM D 4751 : 1999 : REV A : R2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4716 : 2008 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 4751 : 2021 : REV A | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 1695 : 1996 | Standard Terminology of Cellulose and Cellulose Derivatives |
ASTM D 3895 : 2002 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 5261 : 1992 : R1996 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 4595 : 1986 : R1994 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 3895 : 2004 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 4716 : 2004 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 5322 : 1998 : R2009 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
ASTM D 4491 : 1999 : REV A : R2014 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4716 : 2003 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 1695 : 2007 | Standard Terminology of Cellulose and Cellulose Derivatives |
ASTM D 1238 : 2004 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 6213 : 1997 : R2003 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
ASTM D 5261 : 1992 : R2009 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 6213 : 1997 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
ASTM D 4716 : 2007 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 6241 : 2014 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4751 : 2012 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
ASTM D 6241 : 2004 : R2009 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 5496 : 2015 | Standard Practice for In Field Immersion Testing of Geosynthetics |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
ASTM D 4595 : 2017 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 6241 : 1999 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 5199 : 2012 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
ASTM D 5199 : 2011 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 5322 : 1998 : R2003 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
ASTM D 7409 : 2007 | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
ASTM D 4595 : 2009 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 6241 : 2022 | Standard Test Method for Static Puncture Index Strength of Geotextiles and Geotextile-Related Products Using a 50 mm Probe |
ASTM D 5322 : 2017 | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
ASTM D 7409 : 2015 | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
ASTM D 6241 : 2004 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4632 : 2008 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 1238 : 2001 : EDT 1 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 6213 : 1997 : R2009 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
ASTM D 4751 : 2020 : REV B | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 5885 : 1997 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
ASTM D 6241 : 2004 : R2009 : EDT 1 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 5496 : 1998 | Standard Practice for In Field Immersion Testing of Geosynthetics |
ASTM D 4751 : 2016 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 5199 : 2001 : R2006 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
ASTM D 1238 : 2020 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1238 : 2004 : REV A | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 4491 : 1999 : REV A | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 7409 : 2007 : EDT 1 | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
ASTM D 4491 : 1999 : REV A : R2004 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4716 : 2001 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 6213 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
ASTM D 6241 : 2022 : REV A | Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe |
ASTM D 4632 : 1991 : R2003 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
ASTM D 1238 : 1985 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 16 : 2023 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
ASTM D 4595 : 2005 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
ASTM D 4603 : 2003 : R2011 : EDT 1 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.