ASTM D 2065 : 2003 : R2017
|
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
IEEE C57.12.30-2010
|
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments |
MIL-PRF-24667 Revision C:2008
|
COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
MIL-PRF-24763 Revision B:2009
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL-PRF-32577 Base Document:2017
|
COATING SYSTEM, NONSKID, METALLIC THERMAL SPRAY APPLICATION |
ASTM D 6137 : 1997
|
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
ASTM D 6944 : 2015 : REDLINE
|
Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling |
ASTM D 3322 : 1982 : R2001
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM E 1605 : 2004 : R2012
|
Standard Terminology Relating to Lead in Buildings |
NACE RP 02 81 : 2004
|
METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
IEEE C57.12.29-2014
|
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments |
ASTM D 2830 : 1996
|
Standard Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products (Withdrawn 2004) |
ASTM D 5499 : 1994 : R1999
|
Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM G 210 : 2013
|
Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus |
ASTM D 4082 : 2010
|
Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants |
ASTM D 3927 : 1987
|
Guide for State and Institutional Purchasing of Paint (Withdrawn 1991) |
CSA A440-A440.1 : 2000
|
WINDOWS - USER SELECTION GUIDE TO CSA STANDARD CSA-A440-00, WINDOWS |
SAE J 2633 : 2015
|
WHEEL AND WHEEL TRIM WEATHERING TESTING FOR PAINT COATINGS |
ASTM E 1605 : 2004
|
Standard Terminology Relating to Lead in Buildings |
ASTM D 4141/D4141M : 2014 : REDLINE
|
Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
ASTM D 3322 : 1982 : R2011
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 3322 : 1982 : R2005
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 6137 : 1997 : R2012
|
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM D 333 : 2001 : R2007
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
ASTM D 2065 : 2003
|
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
ASTM D 5499 : 1994 : R2013
|
Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
CSA Z107.9 : 2000 : R2004
|
STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
MIL-PRF-24635 Revision E:2009
|
COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
ASTM D 5499 : 1994 : R2007
|
Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
SSPC-PS 26.00 : 2016
|
ALUMINUM-PIGMENTED EPOXY COATING SYSTEM MATERIALS STANDARD, PERFORMANCE-BASED |
ACI 350M : 2006
|
METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
ACI 350 : 2006
|
CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
NACE TM 01 84 : 83(R1994)
|
ACCELERATED TEST PROCEDURES FOR SCREENING ATMOSPHERIC SURFACE COATING SYSTEMS FOR OFFSHORE PLATFORMS AND EQUIPMENT |
ASTM D 6137 : 1997 : R2004
|
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM D 1150 : 1955 : R1987 : EDT 1
|
Single and Multi-Panel Forms for Recording Results of Exposure Tests of Paints |
ASTM D 3322 : 1982 : R1996 : EDT 1
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 3451 : 2006
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 333 : 2001 : R2013
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 4082 : 2010 : R2017
|
Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants |
ASTM D 2065 : 2003 : R2011
|
: Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
MIL P 24647 : B
|
PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
MIL E 24763 : A
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
CSA Z107.9 : 2000
|
STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
ASTM D 3451 : 2006 : R2012
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
SAE MS 1003-2 : 2004
|
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
ASTM D 6137 : 1997 : R2018
|
Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
GOST 849:2018
|
Primary nickel. SpecificationsE |
ASTM D 5722 : 2014 : REDLINE
|
Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure |
CGSB-11.5 : M87
|
HARDBOARD, PRECOATED, FACTORY FINISHED, FOR EXTERIOR CLADDING |
N287.2-17
|
Material requirements for concrete containment structures for nuclear power plants |
ASTM D 6763 : 2016 : REDLINE
|
Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
MIL-PRF-24647 Revision E:2013
|
PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
IEEE C57.12.31-2010
|
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
IEEE C57.12.28-2014
|
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity |
ASTM D 2932 : 1980 : R1988 : EDT 1
|
Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 3322 : 1982 : R2017
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 5324 : 2016 : REDLINE
|
Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM D 3451 : 2006 : R2017
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 1641 : 2004
|
Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013) |