ASTM D 7031 : 2011 : R2019
Current
Current
The latest, up-to-date edition.
Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-08-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.1.1This guide covers test methods appropriate for evaluating a wide range of performance properties for wood-plastic composite (WPC) products.
| Committee |
D 07
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers test methods appropriate for evaluating a wide range of performance properties for wood-plastic composite (WPC) products. It was developed from evaluations of both experimental and currently manufactured products, and is not intended to suggest that all the tests listed are necessary or appropriate for each application of a WPC. The user must determine which test methods apply to the particular application being evaluated (see Appendix X1).
1.2Details of manufacturing processes may be proprietary and are beyond the scope of this guide.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 6662 : 2022 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 6662 : 2017 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
| ASTM F 1679 : 2000 | Standard Test Method for Using a Variable Incidence Tribometer (VIT) |
| ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 5764 : 2024 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 4092 : 2007 : R2013 | Standard Terminology for Plastics: Dynamic Mechanical Properties |
| ASTM E 1354 : 2002 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM D 3345 : 1974 : R1999 | Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ASTM D 1413 : 1999 | Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures |
| ASTM D 5764 : 1997 : REV A : R2018 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 4092 : 1996 | Standard Terminology: Plastics: Dynamic Mechanical Properties |
| ASTM D 1929 : 2019 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 6341 : 1998 | Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C) |
| ASTM D 1929 : 1996 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM E 1354 : 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM G 154 : 2016 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM D 5456 : 2014 : REV B | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2395 : 1993 : R1997 : EDT 2 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 2047 : 1999 | Standard Test Method for Static Coefficient of Friction of Polish-Coated Floor Surfaces as Measured by the James Machine |
| ASTM D 1554 : 2010 : R2023 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM E 1354 : 2003 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM E 1354 : 2002 : REV D : EDT 1 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 1929 : 2013 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM D 1554 : 2000 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 4761 : 2002 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM C 1308 : 1995 : R2001 | Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms |
| ASTM D 5456 : 2021 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1929 : 2014 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM D 4092 : 2021 | Standard Terminology for Plastics: Dynamic Mechanical Properties |
| ASTM D 4000 : 2004 : EDT 1 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 2047 : 2017 | Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine |
| ASTM G 154 : 2023 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials |
| ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 5379/D5379M : 2019 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| ASTM E 1354 : 2024 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5764 : 2023 : REV A | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 5764 : 1997 : REV A | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products |
| ASTM D 1038 : 1983 : R1993 | Standard Terminology Relating to Veneer and Plywood |
| ASTM D 1929 : 2016 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM D 4000 : 2023 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 4761 : 2018 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 661 : 2003 : R2015 : EDT 1 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM D 4495 : 2000 | Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| ASTM D 5456 : 2017 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM C 1308 : 2008 : R2017 | Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms |
| ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 2565 : 2023 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
| ASTM D 1929 : 2020 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM D 143 : 2023 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 2395 : 2017 : R2022 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM E 84 : 2024 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 1929 : 2023 | Standard Test Method for Determining Ignition Temperature of Plastics |
| ASTM D 2395 : 1993 : R1997 : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 4000 : 2000 | Standard Classification System for Specifying Plastic Materials |
| ASTM E 1354 : 2022 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 3345 : 2017 | Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites |
| ASTM D 5456 : 2017 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 1354 : 2015 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 6662 : 2001 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
| ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM E 1354 : 2016 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5379/D5379M : 2019 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| ASTM D 2481 : 1981 : R1994 : EDT 1 | Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens |
| ASTM D 5764 : 2023 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 4761 : 2005 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 5456 : 2011 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 6109 : 2019 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
| ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM E 1354 : 2022 : REV C | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 1037 : 1978 | Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM E 1354 : 2016 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 2395 : 2014 : EDT 1 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 2394 : 1983 : R1999 | Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring |
| ASTM D 6341 : 2021 | Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) |
| ASTM D 2565 : 1970 | Standard Recommended Practice For Operating Xenon Arc-Type (Water-Cooled) Light - And Water-Exposure Apparatus For Exposure Of Plastics |
| ASTM E 1354 : 2017 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 2023 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 6109 : 1997 : EDT 1 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber |
| ASTM D 5456 : 1999 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM E 1354 : 2015 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 3345 : 2022 | Standard Test Method for Laboratory Evaluation of Wood for Resistance to Subterranean Termites |
| ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM E 1354 : 2022 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 1761 : 1988 : R1995 : EDT 1 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 1554 : 2010 : R2016 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4060 : 1995 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 5456 : 2019 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2565 : 2016 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 4495 : 2016 | Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| ASTM D 1038 : 2019 | Standard Terminology Relating to Veneer, Plywood, and Wood Structural Panels |
| ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 661 : 2022 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 4495 : 2021 | Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| ASTM D 2394 : 2017 | Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring |
| ASTM E 1354 : 2022 : REV B | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 4060 : 2014 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 6341 : 2016 | Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) |
| ASTM C 1308 : 2021 | Standard Test Method for Accelerated Leach Test for Measuring Contaminant Releases From Solidified Waste |
| ASTM D 2017 : 1981 : R1994 : EDT 1 | Standard Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods (Withdrawn 2002) |
| ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 2394 : 2017 : R2022 | Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 5456 : 2018 | Standard Specification for Evaluation of Structural Composite Lumber Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.