ASTM D 7032 : 2021
Current
The latest, up-to-date edition.
Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
Hardcopy , PDF
English
13-12-2021
Committee |
D 07
|
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers procedures to establish a performance rating for wood-plastic composite and plastic lumber for use as exterior deck boards, stair treads, guards, and handrails. The purpose of this specification is to establish a basis for code recognition of these products or systems in exterior applications.
Note 1:While wood-plastic composites contain wood or other cellulosic materials, the presence of wood or other cellulosic materials in plastic lumber is not required by this specification. Due to non-wood materials in wood-plastic composites and plastic lumber the structural, physical, fire, and other attributes may not be similar to those of wood.
Note 2:The products addressed in this standard are considered combustible. No fire response characteristic is required in this specification except for flame spread index as determined in accordance with Test Method E84.
1.1.1The plastic component of wood-plastic composites and plastic lumber covered by this specification shall consist primarily of thermoplastics.
1.2Deck boards, stair treads, guards, and handrails covered by this specification are permitted to be of any code compliant shape and thickness (solid or non-solid).
1.3Wood-plastic composites and plastic lumber are produced in a broad range of fiber and/or resin formulations. It is recognized that the performance requirements in this specification are valid for any material or combination of materials used as deck boards, stair treads, guards, or handrails.
1.4Details of manufacturing processes are beyond the scope of this specification.
1.5The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7Table of Contents:
Section | |
Scope | 1 |
Referenced Documents | 2 |
Terminology | 3 |
General Requirements | 4 |
Sampling | 4.1 |
Sample Size | 4.2 |
Conditioning | 4.3 |
Flexural Tests | 4.4 |
Temperature and Moisture Effects | 4.5 |
Ultraviolet (UV) Resistance Test | 4.6 |
Freeze-Thaw Resistance Test | 4.7 |
Biodeterioration Tests | 4.8 |
Fire Performance Tests | 4.9 |
Deck Board Performance Requirements | 5 |
General | 5.1 |
Flexural Performance Tests | 5.2 |
Determination of the Unadjusted Allowable Load | 5.3 |
Creep-Recovery Test | 5.4 |
Mechanical Fastener Holding Tests | 5.5 |
Slip Resistance Test | 5.6 |
Guard and Handrail Performance Requirements | 6 |
General | 6.1 |
Guardrail System Test Requirements | 6.2 |
One- and Two-Family Dwelling Requirements | 6.2.1.1 |
Handrail Test Requirements (Concentrated Load) | 6.3 |
Report | 7 |
Independent Inspection | 8 |
Manufacturing Standard | 9 |
Precision and Bias | 10 |
Keywords | 11 |
Two-Span Test Method | Annex A1 |
Commentary | Appendix X1 |
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2957 : 2017 | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
ASTM E 2726/E2726M : 2012 : REV A : R2017 | Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands |
ASTM E 2707 : 2015 | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
ASTM D 7568 : 2017 | Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications |
ASTM D 6662 : 2022 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM D 6662 : 2017 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 5764 : 2024 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
ASTM D 5764 : 1997 : REV A : R2018 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
ASTM G 154 : 2016 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
ASTM D 1554 : 2010 : R2023 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM G 154 : 2023 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials |
ASTM E 1354 : 2024 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 5764 : 2023 : REV A | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 4000 : 2023 | Standard Classification System for Specifying Plastic Materials |
ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 2565 : 2023 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM D 1929 : 2020 | Standard Test Method for Determining Ignition Temperature of Plastics |
ASTM E 84 : 2024 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 1929 : 2023 | Standard Test Method for Determining Ignition Temperature of Plastics |
ASTM E 1354 : 2022 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 3345 : 2017 | Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites |
ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 5764 : 2023 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 6109 : 2019 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM E 1354 : 2022 : REV C | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1354 : 2017 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1354 : 2023 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 3345 : 2022 | Standard Test Method for Laboratory Evaluation of Wood for Resistance to Subterranean Termites |
ASTM E 1354 : 2022 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 1554 : 2010 : R2016 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
ASTM D 2565 : 2016 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 2394 : 2017 | Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring |
ASTM E 1354 : 2022 : REV B | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
ASTM D 2394 : 2017 : R2022 | Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.