![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 7932 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
Hardcopy , PDF
19-10-2023
English
29-09-2017
CONTAINED IN VOL. 15.10, 2017 Gives a standard means to test and measure performance characteristics of printed, pressure sensitive adhesive labels for containers, particularly containers to be used in extreme distribution environments (for example, hazardous materials labels, aerospace, military containers).
Committee |
D 10
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification provides a standard means to test and measure performance characteristics of printed, pressure-sensitive adhesive labels for containers, particularly containers to be used in extreme distribution environments (for example, hazardous materials labels, aerospace, military containers). For the purposes of this specification, an extreme distribution environment is one in which it can be reasonably expected to experience direct exposure to deteriorating chemicals, weather, elevated/cold temperatures, and other environmental and physical elements for an extended period of time.
1.2Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
ASTM D 996 : 2023 | Standard Terminology of Packaging and Distribution Environments |
ASTM D 4814 : 2004 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 6210 : 2017 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines<rangeref></rangeref > |
ASTM D 4814 : 2014 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3611 : 1989 : R1998 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
ASTM D 4814 : 2001 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 1000 : 2017 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 4814 : 2004 : REV B : EDT 1 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
SAE J 183 : 2016 | ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING') |
ASTM D 975 : 2022 | Standard Specification for Diesel Fuel |
ASTM D 4814 : 2015 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4814 : 2000 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6210 : 2004 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
ASTM D 6210 : 2008 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
ASTM G 195 : 2022 | Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser |
ASTM G 195 : 2021 | Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser |
ASTM D 4814 : 2011 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4332 : 2000 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 2244 : 2023 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ISO/IEC 15426-2:2015 | Information technology — Automatic identification and data capture techniques — Bar code verifier conformance specification — Part 2: Two-dimensional symbols |
ASTM G 195 : 2018 | Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser |
ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
ASTM D 975 : 2019 : REV B | Standard Specification for Diesel Fuel |
ASTM D 4814 : 2018 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3611 : 1989 : R2003 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
ASTM D 4814 : 2018 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 1995 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2009 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 975 : 2021 | Standard Specification for Diesel Fuel |
ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4332 : 2022 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2016 : REV : EDT 0 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ISO/IEC 15416:2016 | Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols |
ASTM D 4332 : 2001 : EDT 1 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2020 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4814 : 2012 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4814 : 2016 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
ASTM D 4814 : 2010 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2003 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2001 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3611 : 2006 : R2011 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
ASTM D 4814 : 2022 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4814 : 2021 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2008 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 975 : 2020 : REV C | Standard Specification for Diesel Fuel |
ASTM D 4814 : 2021 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 996 : 2016 | Standard Terminology of Packaging and Distribution Environments |
ASTM D 6210 : 2010 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
ASTM D 4814 : 2023 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
ASTM D 4814 : 2003 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4332 : 2001 : R2006 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2020 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2004 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ISO/IEC 15426-1:2006 | Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 1: Linear symbols |
ASTM D 4814 : 2010 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2008 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 1000 : 2004 : EDT 1 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 374/D374M : 2016 | Standard Test Methods for Thickness of Solid Electrical Insulation |
ASTM D 1000 : 2010 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
SAE J 300 : 2015 | Engine Oil Viscosity Classification<br> |
ASTM D 4814 : 2009 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4814 : 2011 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3611 : 2006 : R2019 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
ASTM D 6210 : 2003 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
ASTM D 4814 : 2008 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6210 : 2006 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
ASTM D 4814 : 2002 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2011 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM A 666 : 2015 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
ASTM D 4814 : 2019 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2006 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2007 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2018 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2006 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 1992 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
ASTM D 4814 : 2014 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2015 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6210 : 1998 : REV A | Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines |
ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 1000 : 2009 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 4814 : 2007 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4332 : 2014 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2009 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 975 : 2022 : REV A | Standard Specification for Diesel Fuel |
ASTM D 4814 : 2018 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2013 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4332 : 2001 : EDT 2 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2016 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2017 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2021 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2000 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2004 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 975 : 2023 | Standard Specification for Diesel Fuel |
ASTM D 996 : 2010 | Standard Terminology of Packaging and Distribution Environments |
ASTM A 666 : 2023 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4814 : 1993 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ISO/IEC 15415:2011 | Information technology Automatic identification and data capture techniques Bar code symbol print quality test specification Two-dimensional symbols |
ASTM D 1000 : 1999 | Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 1000 : 2004 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
ASTM D 4814 : 2019 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3611 : 2006 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
ASTM D 1000 : 2017 : REDLINE | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
ASTM D 4814 : 2014 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4332 : 1999 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2018 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2021 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4332 : 2013 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2007 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6210 : 2003 : EDT 1 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
ASTM D 4332 : 2001 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
ASTM D 4814 : 2013 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.